From: Martin Wilck <mwilck@suse.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: Martin Wilck <mwilck@suse.com>, dm-devel@redhat.com
Subject: [PATCH v3 08/22] libmultipath/checkers: rdac: use message id
Date: Tue, 30 Oct 2018 22:06:39 +0100 [thread overview]
Message-ID: <20181030210653.29677-9-mwilck@suse.com> (raw)
In-Reply-To: <20181030210653.29677-1-mwilck@suse.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
---
libmultipath/checkers/rdac.c | 64 +++++++++++++++++++++++++-----------
1 file changed, 45 insertions(+), 19 deletions(-)
diff --git a/libmultipath/checkers/rdac.c b/libmultipath/checkers/rdac.c
index 5104e4e5..266f8e10 100644
--- a/libmultipath/checkers/rdac.c
+++ b/libmultipath/checkers/rdac.c
@@ -31,9 +31,7 @@
#define CURRENT_PAGE_CODE_VALUES 0
#define CHANGEABLE_PAGE_CODE_VALUES 1
-#define MSG_RDAC_UP "rdac checker reports path is up"
-#define MSG_RDAC_DOWN "rdac checker reports path is down"
-#define MSG_RDAC_GHOST "rdac checker reports path is ghost"
+#define MSG_RDAC_DOWN " reports path is down"
#define MSG_RDAC_DOWN_TYPE(STR) MSG_RDAC_DOWN": "STR
#define RTPG_UNAVAILABLE 0x3
@@ -219,41 +217,69 @@ struct volume_access_inq
char dontcare1[34];
};
-const char
-*checker_msg_string(struct volume_access_inq *inq)
+enum {
+ RDAC_MSGID_NOT_CONN = CHECKER_FIRST_MSGID,
+ RDAC_MSGID_IN_STARTUP,
+ RDAC_MSGID_NON_RESPONSIVE,
+ RDAC_MSGID_IN_RESET,
+ RDAC_MSGID_FW_DOWNLOADING,
+ RDAC_MSGID_QUIESCED,
+ RDAC_MSGID_SERVICE_MODE,
+ RDAC_MSGID_UNAVAILABLE,
+ RDAC_MSGID_INQUIRY_FAILED,
+};
+
+#define _IDX(x) (RDAC_MSGID_##x - CHECKER_FIRST_MSGID)
+const char *libcheck_msgtable[] = {
+ [_IDX(NOT_CONN)] = MSG_RDAC_DOWN_TYPE("lun not connected"),
+ [_IDX(IN_STARTUP)] = MSG_RDAC_DOWN_TYPE("ctlr is in startup sequence"),
+ [_IDX(NON_RESPONSIVE)] =
+ MSG_RDAC_DOWN_TYPE("non-responsive to queries"),
+ [_IDX(IN_RESET)] = MSG_RDAC_DOWN_TYPE("ctlr held in reset"),
+ [_IDX(FW_DOWNLOADING)] =
+ MSG_RDAC_DOWN_TYPE("ctlr firmware downloading"),
+ [_IDX(QUIESCED)] = MSG_RDAC_DOWN_TYPE("ctlr quiesced by admin request"),
+ [_IDX(SERVICE_MODE)] = MSG_RDAC_DOWN_TYPE("ctlr is in service mode"),
+ [_IDX(UNAVAILABLE)] = MSG_RDAC_DOWN_TYPE("ctlr is unavailable"),
+ [_IDX(INQUIRY_FAILED)] = MSG_RDAC_DOWN_TYPE("inquiry failed"),
+ NULL,
+};
+
+static int
+checker_msg_string(const struct volume_access_inq *inq)
{
/* lun not connected */
if (((inq->PQ_PDT & 0xE0) == 0x20) || (inq->PQ_PDT & 0x7f))
- return MSG_RDAC_DOWN_TYPE("lun not connected");
+ return RDAC_MSGID_NOT_CONN;
/* if no tpg data is available, give the generic path down message */
if (!(inq->avtcvp & 0x10))
- return MSG_RDAC_DOWN;
+ return CHECKER_MSGID_DOWN;
/* controller is booting up */
if (((inq->aas_cur & 0x0F) == RTPG_TRANSITIONING) &&
(inq->aas_alt & 0x0F) != RTPG_TRANSITIONING)
- return MSG_RDAC_DOWN_TYPE("ctlr is in startup sequence");
+ return RDAC_MSGID_IN_STARTUP;
/* if not unavailable, give generic message */
if ((inq->aas_cur & 0x0F) != RTPG_UNAVAILABLE)
- return MSG_RDAC_DOWN;
+ return CHECKER_MSGID_DOWN;
/* target port group unavailable */
switch (inq->vendor_specific_cur) {
case RTPG_UNAVAIL_NON_RESPONSIVE:
- return MSG_RDAC_DOWN_TYPE("non-responsive to queries");
+ return RDAC_MSGID_NON_RESPONSIVE;
case RTPG_UNAVAIL_IN_RESET:
- return MSG_RDAC_DOWN_TYPE("ctlr held in reset");
+ return RDAC_MSGID_IN_RESET;
case RTPG_UNAVAIL_CFW_DL1:
case RTPG_UNAVAIL_CFW_DL2:
- return MSG_RDAC_DOWN_TYPE("ctlr firmware downloading");
+ return RDAC_MSGID_FW_DOWNLOADING;
case RTPG_UNAVAIL_QUIESCED:
- return MSG_RDAC_DOWN_TYPE("ctlr quiesced by admin request");
+ return RDAC_MSGID_QUIESCED;
case RTPG_UNAVAIL_SERVICE_MODE:
- return MSG_RDAC_DOWN_TYPE("ctlr is in service mode");
+ return RDAC_MSGID_SERVICE_MODE;
default:
- return MSG_RDAC_DOWN_TYPE("ctlr is unavailable");
+ return RDAC_MSGID_UNAVAILABLE;
}
}
@@ -307,14 +333,14 @@ int libcheck_check(struct checker * c)
done:
switch (ret) {
case PATH_DOWN:
- MSG(c, "%s", (inqfail) ? MSG_RDAC_DOWN_TYPE("inquiry failed") :
- checker_msg_string(&inq));
+ c->msgid = (inqfail ? RDAC_MSGID_INQUIRY_FAILED :
+ checker_msg_string(&inq));
break;
case PATH_UP:
- MSG(c, MSG_RDAC_UP);
+ c->msgid = CHECKER_MSGID_UP;
break;
case PATH_GHOST:
- MSG(c, MSG_RDAC_GHOST);
+ c->msgid = CHECKER_MSGID_GHOST;
break;
}
--
2.19.1
next prev parent reply other threads:[~2018-10-30 21:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-30 21:06 [PATCH v3 00/22] libmultipath: checkers overhaul Martin Wilck
2018-10-30 21:06 ` [PATCH v3 01/22] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-10-30 21:06 ` [PATCH v3 02/22] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-10-30 21:06 ` [PATCH v3 03/22] libmultipath/checkers: replace message by msgid Martin Wilck
2018-10-30 21:06 ` [PATCH v3 04/22] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-10-30 21:06 ` [PATCH v3 05/22] libmultipath/checkers: directio: " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 06/22] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 07/22] libmultipath/checkers: hp_sw: " Martin Wilck
2018-10-30 21:06 ` Martin Wilck [this message]
2018-10-30 21:06 ` [PATCH v3 09/22] libmultipath/checkers: readsector0: " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 10/22] libmultipath/checkers: tur: " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 11/22] multipathd: improve checker message logging Martin Wilck
2018-10-30 21:06 ` [PATCH v3 12/22] libmultipath/checkers: support unsupported paths Martin Wilck
2018-10-30 21:06 ` [PATCH v3 13/22] libmultipath: clariion checker: leave unsupported paths alone Martin Wilck
2018-11-01 19:49 ` Benjamin Marzinski
2018-10-30 21:06 ` [PATCH v3 14/22] libmultipath: hp_sw " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 15/22] libmultipath: rdac " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 16/22] libmultipath: tur " Martin Wilck
2018-10-30 21:06 ` [PATCH v3 17/22] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-10-30 21:06 ` [PATCH v3 18/22] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-10-30 21:06 ` [PATCH v3 19/22] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-10-30 21:06 ` [PATCH v3 20/22] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-10-30 21:06 ` [PATCH v3 21/22] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-10-30 21:06 ` [PATCH v3 22/22] libmultipath: make checker_message thread safe Martin Wilck
2018-11-01 19:53 ` Benjamin Marzinski
2018-11-02 8:50 ` Martin Wilck
2018-10-30 21:10 ` [PATCH v3 00/22] libmultipath: checkers overhaul Martin Wilck
2018-10-30 21:12 ` Martin Wilck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181030210653.29677-9-mwilck@suse.com \
--to=mwilck@suse.com \
--cc=christophe.varoqui@opensvc.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox