From: URZ- AG <arsene.gschwind@unibas.ch>
To: dm-devel@redhat.com
Subject: multipath disk size
Date: Fri, 07 Apr 2006 10:47:27 +0200 [thread overview]
Message-ID: <4436271F.1090509@unibas.ch> (raw)
Hi,
I'm posting my question again, i would really appreciate if someone
could give me a hint why this happen.
I'm trying to setup a FC Storage (Adaptec SANBloc 2Gb) using multipath
(Kernel 2.6.15 - multipath-tool-0.4.7 on Fedora Core 5 )
Everything seem to run right, but the disk created by multipath does not
reflect the physical one.
I do have a physical volume that is about 67GB big, when multipath
creates the dm device it is at least 1GB.
Here is the output of multipath -v3:
----------------------------------------------------
dm-0: blacklisted
dm-1: blacklisted
dm-2: blacklisted
dm-4: blacklisted
dm-5: blacklisted
fd0: blacklisted
hdd: blacklisted
md0: blacklisted
ram0: blacklisted
ram10: blacklisted
ram11: blacklisted
ram12: blacklisted
ram13: blacklisted
ram14: blacklisted
ram15: blacklisted
ram1: blacklisted
ram2: blacklisted
ram3: blacklisted
ram4: blacklisted
ram5: blacklisted
ram6: blacklisted
ram7: blacklisted
ram8: blacklisted
ram9: blacklisted
sda: not found in pathvec
sda: mask = 0x1f
sda: bus = 1
sda: dev_t = 8:0
sda: size = 71553024
sda: vendor = LSILOGIC
sda: product = 1030 IM
sda: rev = 1000
sda: h:b:t:l = 0:0:1:0
sda: serial =
sda: path checker = readsector0 (config file default)
sda: state = 2
sda: getprio = /bin/true (config file default)
sda: prio = 0
sda: getuid = /sbin/scsi_id -g -u -s /block/%n (config file default)
error calling out /sbin/scsi_id -g -u -s /block/sda
sdb: not found in pathvec
sdb: mask = 0x1f
sdb: bus = 1
sdb: dev_t = 8:16
sdb: size = 142114816
sdb: vendor = EUROLOGC
sdb: product = FC2502
sdb: rev = 7902
sdb: h:b:t:l = 2:0:0:0
sdb: tgt_node_name = 0x20000080e512dc77
sdb: serial = 0000dc7720000080e512dc770000000000000000
sdb: path checker = readsector0 (controler setting)
sdb: state = 2
sdb: getprio = /bin/true (config file default)
sdb: prio = 0
sdb: getuid = /sbin/scsi_id -g -u -p 0x80 -s /block/%n (controler setting)
sdb: uid = SEUROLOGCFC2502_0000dc7720000080e512dc770000000000000000
(callout)
sdc: not found in pathvec
sdc: mask = 0x1f
sdc: bus = 1
sdc: dev_t = 8:32
sdc: size = 142114816
sdc: vendor = EUROLOGC
sdc: product = FC2502
sdc: rev = 7902
sdc: h:b:t:l = 2:0:1:0
sdc: tgt_node_name = 0x20000080e512dc77
sdc: serial = 0000dc7720000080e512dc770000000000000000
sdc: path checker = readsector0 (controler setting)
sdc: state = 2
sdc: getprio = /bin/true (config file default)
sdc: prio = 0
sdc: getuid = /sbin/scsi_id -g -u -p 0x80 -s /block/%n (controler setting)
sdc: uid = SEUROLOGCFC2502_0000dc7720000080e512dc770000000000000000
(callout)
===== paths list =====
uuid hcil dev
dev_t pri
0:0:1:0 sda 8:0 0
SEUROLOGCFC2502_0000dc7720000080e512dc770000000000000000 2:0:0:0 sdb 8:16 0
SEUROLOGCFC2502_0000dc7720000080e512dc770000000000000000 2:0:1:0 sdc 8:32 0
8:16 ownership set to hdmail
sdb: not found in pathvec
sdb: mask = 0xc
sdb: state = 2
sdb: prio = 0
8:32 ownership set to hdmail
sdc: not found in pathvec
sdc: mask = 0xc
sdc: state = 2
sdc: prio = 0
hdmail: pgfailback = -2 (config file default)
hdmail: pgpolicy = failover (controler setting)
hdmail: selector = round-robin 0 (controler setting)
hdmail: features = 0 (internal default)
hdmail: hwhandler = 0 (internal default)
hdmail: rr_weight = 2 (config file default)
hdmail: minio = 100 (config file default)
hdmail: no_path_retry = -1 (config file default)
hdmail: set ACT_CREATE (map does not exist)
hdmail: set ACT_CREATE (map does not exist)
create: hdmail (SEUROLOGCFC2502_0000dc7720000080e512dc770000000000000000)
[size=1 GB][features=0][hwhandler=0]
\_ round-robin 0 [prio=0][undef]
\_ 2:0:0:0 sdb 8:16 [undef][ready]
\_ round-robin 0 [prio=0][undef]
\_ 2:0:1:0 sdc 8:32 [undef][ready]
----------------------------------------------------
When you look at the disk size, it return the correct value but when it
creates the dm device it does it too small.
When I do create the multipath device using dmsetup it creates it with
the right size, but as soon as I do runf multipath again it resize the
device.
Thanks a lot for your work and your help
Regards,
Arsène
next reply other threads:[~2006-04-07 8:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-07 8:47 URZ- AG [this message]
2006-04-07 22:31 ` multipath disk size Christophe Varoqui
2006-04-11 19:54 ` URZ- AG
2006-04-12 12:19 ` Arsene Gschwind
2006-04-12 19:45 ` Christophe Varoqui
2006-04-13 9:34 ` Arsene Gschwind
2006-04-13 16:41 ` Arsene Gschwind
-- strict thread matches above, loose matches on Subject: below --
2006-03-30 16:06 Arsene Gschwind
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4436271F.1090509@unibas.ch \
--to=arsene.gschwind@unibas.ch \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox