dm-devel.redhat.com archive mirror
 help / color / mirror / Atom feed
From: Jens Axboe <axboe@kernel.dk>
To: Christian Kujau <lists@nerdbynature.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
	peterz@infradead.org, dm-devel@redhat.com
Subject: Re: BUG: spinlock trylock failure on UP on CPU#0, vgchange/936
Date: Sun, 22 Jan 2012 11:30:32 +0100	[thread overview]
Message-ID: <4F1BE548.3000800@kernel.dk> (raw)
In-Reply-To: <alpine.DEB.2.01.1201211430340.2895@trent.utfs.org>

On 01/21/2012 11:35 PM, Christian Kujau wrote:
> On Sat, 21 Jan 2012 at 13:46, Jens Axboe wrote:
>> Can you try and pull:
>>
>> git://git.kernel.dk/linux-block.git for-linus
>>
>> and see if it helps?
> 
> Pulled, compiled, bootet - but the BUG: stays. Please see .config and full 
> dmesg: http://nerdbynature.de/bits/3.2.0/   (the 3.3.0-rc1 files)
> 
> Note that I don't have an actual problem here: the machine (PowerBook G4) 
> is booting & running fine, I'm currently not using any LVM devices, so 
> it's merely the BUG: being printed during bootup I'm whining about.

What about with this on top?


diff --git a/block/blk-core.c b/block/blk-core.c
index e6c05a9..75eba5c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1283,7 +1283,7 @@ static bool attempt_plug_merge(struct request_queue *q, struct bio *bio,
 		if (rq->q != q)
 			continue;
 
-		el_ret = elv_try_merge(rq, bio);
+		el_ret = blk_try_merge(rq, bio);
 		if (el_ret == ELEVATOR_BACK_MERGE) {
 			ret = bio_attempt_back_merge(q, rq, bio);
 			if (ret)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index cfcc37c..ee9ec90 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -471,3 +471,59 @@ int blk_attempt_req_merge(struct request_queue *q, struct request *rq,
 {
 	return attempt_merge(q, rq, next);
 }
+
+int blk_rq_merge_ok(struct request *rq, struct bio *bio)
+{
+	if (!rq_mergeable(rq))
+		return 0;
+
+	/*
+	 * Don't merge file system requests and discard requests
+	 */
+	if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
+		return 0;
+
+	/*
+	 * Don't merge discard requests and secure discard requests
+	 */
+	if ((bio->bi_rw & REQ_SECURE) != (rq->bio->bi_rw & REQ_SECURE))
+		return 0;
+
+	/*
+	 * different data direction or already started, don't merge
+	 */
+	if (bio_data_dir(bio) != rq_data_dir(rq))
+		return 0;
+
+	/*
+	 * must be same device and not a special request
+	 */
+	if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
+		return 0;
+
+	/*
+	 * only merge integrity protected bio into ditto rq
+	 */
+	if (bio_integrity(bio) != blk_integrity_rq(rq))
+		return 0;
+
+	return 1;
+}
+EXPORT_SYMBOL(blk_rq_merge_ok);
+
+int blk_try_merge(struct request *__rq, struct bio *bio)
+{
+	int ret = ELEVATOR_NO_MERGE;
+
+	/*
+	 * we can merge and sequence is ok, check if it's possible
+	 */
+	if (blk_rq_merge_ok(__rq, bio)) {
+		if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
+			ret = ELEVATOR_BACK_MERGE;
+		else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
+			ret = ELEVATOR_FRONT_MERGE;
+	}
+
+	return ret;
+}
diff --git a/block/blk.h b/block/blk.h
index 7efd772..a117fa9 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -137,6 +137,8 @@ int blk_attempt_req_merge(struct request_queue *q, struct request *rq,
 				struct request *next);
 void blk_recalc_rq_segments(struct request *rq);
 void blk_rq_set_mixed_merge(struct request *rq);
+int blk_rq_merge_ok(struct request *rq, struct bio *bio);
+int blk_try_merge(struct request *rq, struct bio *bio);
 
 void blk_queue_congestion_threshold(struct request_queue *q);
 
diff --git a/block/elevator.c b/block/elevator.c
index 91e18f8..a1a75f7 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -72,39 +72,8 @@ static int elv_iosched_allow_merge(struct request *rq, struct bio *bio)
  */
 int elv_rq_merge_ok(struct request *rq, struct bio *bio)
 {
-	if (!rq_mergeable(rq))
+	if (!blk_rq_merge_ok(rq, bio))
 		return 0;
-
-	/*
-	 * Don't merge file system requests and discard requests
-	 */
-	if ((bio->bi_rw & REQ_DISCARD) != (rq->bio->bi_rw & REQ_DISCARD))
-		return 0;
-
-	/*
-	 * Don't merge discard requests and secure discard requests
-	 */
-	if ((bio->bi_rw & REQ_SECURE) != (rq->bio->bi_rw & REQ_SECURE))
-		return 0;
-
-	/*
-	 * different data direction or already started, don't merge
-	 */
-	if (bio_data_dir(bio) != rq_data_dir(rq))
-		return 0;
-
-	/*
-	 * must be same device and not a special request
-	 */
-	if (rq->rq_disk != bio->bi_bdev->bd_disk || rq->special)
-		return 0;
-
-	/*
-	 * only merge integrity protected bio into ditto rq
-	 */
-	if (bio_integrity(bio) != blk_integrity_rq(rq))
-		return 0;
-
 	if (!elv_iosched_allow_merge(rq, bio))
 		return 0;
 
@@ -114,19 +83,13 @@ EXPORT_SYMBOL(elv_rq_merge_ok);
 
 int elv_try_merge(struct request *__rq, struct bio *bio)
 {
-	int ret = ELEVATOR_NO_MERGE;
-
 	/*
 	 * we can merge and sequence is ok, check if it's possible
 	 */
-	if (elv_rq_merge_ok(__rq, bio)) {
-		if (blk_rq_pos(__rq) + blk_rq_sectors(__rq) == bio->bi_sector)
-			ret = ELEVATOR_BACK_MERGE;
-		else if (blk_rq_pos(__rq) - bio_sectors(bio) == bio->bi_sector)
-			ret = ELEVATOR_FRONT_MERGE;
-	}
+	if (elv_rq_merge_ok(__rq, bio))
+		return blk_try_merge(__rq, bio);
 
-	return ret;
+	return ELEVATOR_NO_MERGE;
 }
 
 static struct elevator_type *elevator_find(const char *name)


-- 
Jens Axboe

  reply	other threads:[~2012-01-22 10:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-18  8:18 BUG: spinlock trylock failure on UP on CPU#0, vgchange/936 Christian Kujau
2012-01-21 11:42 ` Christian Kujau
2012-01-21 12:46   ` Jens Axboe
2012-01-21 22:35     ` Christian Kujau
2012-01-22 10:30       ` Jens Axboe [this message]
2012-01-22 10:36         ` Christian Kujau
2012-01-22 11:38           ` Christian Kujau
2012-01-22 12:10             ` Jens Axboe
2012-01-22 12:09           ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F1BE548.3000800@kernel.dk \
    --to=axboe@kernel.dk \
    --cc=dm-devel@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lists@nerdbynature.de \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).