From: Heinz Mauelshagen <heinzm@redhat.com>
To: device-mapper development <dm-devel@redhat.com>
Subject: Re: RHEL6.6 dm-cache and dm-era
Date: Thu, 25 Sep 2014 12:19:55 +0200 [thread overview]
Message-ID: <5423EC4B.5070904@redhat.com> (raw)
In-Reply-To: <5423B1E0.4000400@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 4236 bytes --]
On 09/25/2014 08:10 AM, Romu Hu wrote:
> On 2014/9/24 12:10, Brassow Jonathan wrote:
>> On Sep 22, 2014, at 7:35 AM, Romu wrote:
>>
>>> I tried the following command to set up my era target but the
>>> command immediately panics the system and the system reboots.
>>>
>>> # dmsetup create MyEra --table "0 41941903 era
>>> /dev/mapper/VG-CacheDataLV_cmeta /dev/mapper/VG-OriginLV 4096"
>>>
>>> The metadata dev and the origin dev are all part of a LVM cache LV.
>>> VG-CacheDataLV_cmeta is the cache metadata LV on the smaller and
>>> faster device, VG-OriginLV is the origin LV on the faster and slower
>>> device, 41941903 is the total sector number of the device of
>>> OriginLV (the LV takes 100% space of the device), 4096 is the block
>>> size of OriginLV, I have run 'mkfs.ext4 /dev/mapper/VG-OriginLV'
>>> before running the dmsetup command.
>>>
>>> Below is the message in /var/log/messages after running the dmsetup
>>> comnmand:
>>>
>>> kernel: device-mapper: era: sb_check failed: magic 1623043: wanted
>>> 2126579579
>>> kernel: device-mapper: block manager: superblock validator check
>>> failed for block 0
>>> kernel: device-mapper: era: couldn't read_lock superblock
>>>
>>>
>>> Any idea?
>>>
>>
>> Sorry, I haven't used dm-era yet. However, it does appear that you
>> are perhaps specifying the wrong devices when creating the era
>> device? Looks like you might be allowing the era target and the
>> cache target to use the same metadata area at the same time - causing
>> them to corrupt each other's metadata area?
>>
>> brassow
>
> I think the dmsetup command to set up an era target should be
> something like this:
>
> # dmsetup create MyEra --table "0 sector_number era metadeta_dev
> origin_dev block_size"
>
> My questions:
>
> 1) How to calculate sector_number? According to
> https://www.kernel.org/doc/Documentation/device-mapper/era.txt, I
> guess it should be (4 * nr_blocks) bytes + buffers, but what is
> nr_blocks and what is buffers?
No calculation: it's the size of your era target in sectors. Typically
"blockdev --getsz origin_dev"
> 2) Any documentation for dmsetup tables?
Look for examples in the kernel source trees Documentaion/device.mapper.
table line syntax is: "start_sector length_in_sectors <target>
<target_arguments{0,N}>"
> 3) Both my metadata_dev and origin_dev are 10G partitions, is this all
> right?
Metadata device size is plenty but that depends on how many eras with
how many updates you want to have.
> 4) My origin_dev is a ext4 filesystem with a block size of 4096, so
> the block_size in the command line should also be 4096?
You may use 4096 = _8_ sectors, you used 4096 sectors = 2MB below.
It's the granularity the era target housekeeps blocks for.
>
> I tried the following command:
>
> # dmsetup create MyEra --table "0 160000 era /dev/mapper/mpathap1
> /dev/mapper/mpathbp1 4096"
May not be same physical device for data and metadata!
If it is, thta'd explain your oops.
# dmsetup create MyEra --table "0 $(blockdev --getsz
/dev/mapper/mpathbp) era whatever_disctinct_metadata_device
/dev/mapper/mpathbp1 8"
Would use 8 sector block size (which is tiny!) with disctinct metadata
and data devices (presumabyl your ext4 sits on /dev/mapper/mpathbp1)
Heinz
>
> It immediately panics the kernel (2.6.32-494.el6.i686) with the
> following info in /var/log/messages:
>
> Sep 24 22:44:22 localhost kernel: device-mapper: era: sb_check failed:
> magic 0: wanted 2126579579
> Sep 24 22:44:22 localhost kernel: device-mapper: block manager:
> superblock validator check failed for block 0
> Sep 24 22:44:22 localhost kernel: device-mapper: era: couldn't
> read_lock superblock
> Sep 24 22:44:22 localhost kernel: BUG: unable to handle kernel NULL
> pointer dereference at 00000008
> Sep 24 22:44:22 localhost kernel: IP: [<f7e9a3c7>]
> era_destroy+0x7/0x60 [dm_era]
> Sep 24 22:44:22 localhost kernel: *pdpt = 0000000001945001 *pde =
> 00000003ff97f067
> Sep 24 22:44:22 localhost kernel: Oops: 0000 [#1] SMP
> Sep 24 22:44:22 localhost kernel: last sysfs file:
> /sys/module/dm_mod/initstate
>
> Thanks
> Romu
>
>
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
[-- Attachment #1.2: Type: text/html, Size: 8463 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2014-09-25 10:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-15 2:24 RHEL6.6 dm-cache and dm-era Romu Hu
2014-09-15 20:25 ` Brassow Jonathan
2014-09-18 8:27 ` Romu Hu
2014-09-22 12:35 ` Romu
2014-09-24 4:10 ` Brassow Jonathan
2014-09-25 6:10 ` Romu Hu
2014-09-25 10:19 ` Heinz Mauelshagen [this message]
2014-09-25 14:02 ` Romu
2014-09-25 14:57 ` Heinz Mauelshagen
2014-09-26 3:16 ` Romu Hu
2014-09-26 10:33 ` Heinz Mauelshagen
2014-09-29 2:31 ` Romu Hu
2014-09-29 10:12 ` Heinz Mauelshagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5423EC4B.5070904@redhat.com \
--to=heinzm@redhat.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox