From: Milan Broz <gmazyland@gmail.com>
To: dm-devel@redhat.com
Cc: Mike Snitzer <msnitzer@redhat.com>,
Mikulas Patocka <mpatocka@redhat.com>
Subject: Re: [PATCH] dm-crypt: Reject sector_size feature if device length is not aligned to it
Date: Sat, 30 Sep 2017 20:31:09 +0200 [thread overview]
Message-ID: <b6c539ce-c841-a21c-1a2c-4ee93d826680@gmail.com> (raw)
In-Reply-To: <20170913134556.23145-1-gmazyland@gmail.com>
On 09/13/2017 03:45 PM, Milan Broz wrote:
> If a crypt mapping uses optional sector_size feature, additional
> restrictions to mapped device segment size must be applied in constructor,
> otherwise the device activation will fail later.
Hi,
we had some discussion with Mikulas if this check should be better in generic DM code.
I think that for this case it is not a good idea - dm-crypt can increase
encryption sector size during load (it is stupid to do, but I see no reason why to block it).
And then only constructor of the target itself know what is possible and what should be rejected.
Anyway, there is a short reproducer what this patch solves:
Create simple mapping with 4096 encryption sector:
# dmsetup create test --table "0 8 crypt cipher_null - 0 /dev/sdb 0 1 sector_size:4096"
Now load new unaligned-length table (this should fail!)
# dmsetup load test --table "0 9 crypt cipher_null - 0 /dev/sdb 0 1 sector_size:4096"
Inactive table is apparently accepted:
# dmsetup table --inactive
test: 0 9 crypt cipher_null 0 0 8:16 0 1 sector_size:4096
And now, resume fails, keeping the device in suspended state afterward:
# dmsetup resume test
device-mapper: resume ioctl on test failed: Invalid argument
Command failed
kernel: device-mapper: table: 254:0: len=9 not aligned to h/w logical block size 4096 of sdb
# dmsetup info -c
Name Maj Min Stat Open Targ Event UUID
test 254 0 L-sw 0 1 0
With the patch applied, the load step correctly fails:
# dmsetup load test --table "0 9 crypt cipher_null - 0 /dev/sdb 0 1 sector_size:4096"
device-mapper: reload ioctl on test failed: Invalid argument
kernel: device-mapper: table: 254:0: crypt: Device size is not multiple of sector_size feature
Please consider this for 4.14 (and stable 4.12+ perhaps).
Thanks,
Milan
>
> Signed-off-by: Milan Broz <gmazyland@gmail.com>
> ---
> drivers/md/dm-crypt.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
> index 54aef8ed97db..488ecd0b1bd0 100644
> --- a/drivers/md/dm-crypt.c
> +++ b/drivers/md/dm-crypt.c
> @@ -2584,6 +2584,10 @@ static int crypt_ctr_optional(struct dm_target *ti, unsigned int argc, char **ar
> ti->error = "Invalid feature value for sector_size";
> return -EINVAL;
> }
> + if (ti->len & ((cc->sector_size >> SECTOR_SHIFT) - 1)) {
> + ti->error = "Device size is not multiple of sector_size feature";
> + return -EINVAL;
> + }
> cc->sector_shift = __ffs(cc->sector_size) - SECTOR_SHIFT;
> } else if (!strcasecmp(opt_string, "iv_large_sectors"))
> set_bit(CRYPT_IV_LARGE_SECTORS, &cc->cipher_flags);
>
next prev parent reply other threads:[~2017-09-30 18:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-13 13:45 [PATCH] dm-crypt: Reject sector_size feature if device length is not aligned to it Milan Broz
2017-09-30 18:31 ` Milan Broz [this message]
2017-10-02 14:43 ` Mikulas Patocka
2017-10-03 6:27 ` Milan Broz
2017-10-03 12:05 ` Alasdair G Kergon
2017-10-03 18:08 ` Mike Snitzer
2017-10-03 19:09 ` Alasdair G Kergon
2017-10-03 20:08 ` Mikulas Patocka
2017-10-03 20:33 ` Milan Broz
2017-10-03 21:18 ` Mike Snitzer
2017-10-04 6:45 ` Milan Broz
2017-10-04 15:05 ` Mike Snitzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b6c539ce-c841-a21c-1a2c-4ee93d826680@gmail.com \
--to=gmazyland@gmail.com \
--cc=dm-devel@redhat.com \
--cc=mpatocka@redhat.com \
--cc=msnitzer@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox