* [LINUX,1/4] dmaengine: xilinx_dma: Fix dma_get_slave_caps() API failures
@ 2017-12-21 10:11 Kedareswara rao Appana
0 siblings, 0 replies; 3+ messages in thread
From: Kedareswara rao Appana @ 2017-12-21 10:11 UTC (permalink / raw)
To: dan.j.williams, vinod.koul, michal.simek, appanad, lars,
akinobu.mita, joabreu, mike.looijmans, kedare06
Cc: dmaengine, linux-arm-kernel, linux-kernel
When client driver uses dma_get_slave_caps() api,
it checks for certain fields of dma_device struct
currently driver is not settings few fields resulting
dma_get_slave_caps() returning failure.
This patch fixes this issue by populating proper values
to the struct dma_device fields.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
drivers/dma/xilinx/xilinx_dma.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 88d317d..21ac954 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2398,6 +2398,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->direction = DMA_MEM_TO_DEV;
chan->id = chan_id;
chan->tdest = chan_id;
+ xdev->common.directions = BIT(DMA_MEM_TO_DEV);
chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2415,6 +2416,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->direction = DMA_DEV_TO_MEM;
chan->id = chan_id;
chan->tdest = chan_id - xdev->nr_channels;
+ xdev->common.directions |= BIT(DMA_DEV_TO_MEM);
chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2629,6 +2631,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
}
+ xdev->common.dst_addr_widths = BIT(addr_width / 8);
+ xdev->common.src_addr_widths = BIT(addr_width / 8);
xdev->common.device_alloc_chan_resources =
xilinx_dma_alloc_chan_resources;
xdev->common.device_free_chan_resources =
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [LINUX,1/4] dmaengine: xilinx_dma: Fix dma_get_slave_caps() API failures
@ 2018-01-03 3:57 Vinod Koul
0 siblings, 0 replies; 3+ messages in thread
From: Vinod Koul @ 2018-01-03 3:57 UTC (permalink / raw)
To: Kedareswara rao Appana
Cc: dan.j.williams, michal.simek, appanad, lars, akinobu.mita,
joabreu, mike.looijmans, kedare06, dmaengine, linux-arm-kernel,
linux-kernel
On Thu, Dec 21, 2017 at 03:41:35PM +0530, Kedareswara rao Appana wrote:
Patch title should say what is does, not the cause/effect
An apt title might be "populate dma caps properly"
> When client driver uses dma_get_slave_caps() api,
> it checks for certain fields of dma_device struct
> currently driver is not settings few fields resulting
> dma_get_slave_caps() returning failure.
It would help to mention the fields you are setting here
>
> This patch fixes this issue by populating proper values
> to the struct dma_device fields.
>
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> ---
> drivers/dma/xilinx/xilinx_dma.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 88d317d..21ac954 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -2398,6 +2398,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
> chan->direction = DMA_MEM_TO_DEV;
> chan->id = chan_id;
> chan->tdest = chan_id;
> + xdev->common.directions = BIT(DMA_MEM_TO_DEV);
>
> chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
> if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
> @@ -2415,6 +2416,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
> chan->direction = DMA_DEV_TO_MEM;
> chan->id = chan_id;
> chan->tdest = chan_id - xdev->nr_channels;
> + xdev->common.directions |= BIT(DMA_DEV_TO_MEM);
>
> chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
> if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
> @@ -2629,6 +2631,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
> dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
> }
>
> + xdev->common.dst_addr_widths = BIT(addr_width / 8);
> + xdev->common.src_addr_widths = BIT(addr_width / 8);
> xdev->common.device_alloc_chan_resources =
> xilinx_dma_alloc_chan_resources;
> xdev->common.device_free_chan_resources =
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* [LINUX,1/4] dmaengine: xilinx_dma: Fix dma_get_slave_caps() API failures
@ 2018-01-03 5:09 Appana Durga Kedareswara Rao
0 siblings, 0 replies; 3+ messages in thread
From: Appana Durga Kedareswara Rao @ 2018-01-03 5:09 UTC (permalink / raw)
To: Vinod Koul
Cc: dan.j.williams@intel.com, michal.simek@xilinx.com,
lars@metafoo.de, akinobu.mita@gmail.com, joabreu@synopsys.com,
mike.looijmans@topic.nl, kedare06@gmail.com,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Hi Vinod,
Thanks for the review...
>
>On Thu, Dec 21, 2017 at 03:41:35PM +0530, Kedareswara rao Appana wrote:
>
>Patch title should say what is does, not the cause/effect
Sure will fix in v2...
>
>An apt title might be "populate dma caps properly"
>
>> When client driver uses dma_get_slave_caps() api, it checks for
>> certain fields of dma_device struct currently driver is not settings
>> few fields resulting
>> dma_get_slave_caps() returning failure.
>
>It would help to mention the fields you are setting here
Sure will fix in v2...
Regards,
Kedar.
>
>>
>> This patch fixes this issue by populating proper values to the struct
>> dma_device fields.
>>
>> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
>> ---
>> drivers/dma/xilinx/xilinx_dma.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/dma/xilinx/xilinx_dma.c
>> b/drivers/dma/xilinx/xilinx_dma.c index 88d317d..21ac954 100644
>> --- a/drivers/dma/xilinx/xilinx_dma.c
>> +++ b/drivers/dma/xilinx/xilinx_dma.c
>> @@ -2398,6 +2398,7 @@ static int xilinx_dma_chan_probe(struct
>xilinx_dma_device *xdev,
>> chan->direction = DMA_MEM_TO_DEV;
>> chan->id = chan_id;
>> chan->tdest = chan_id;
>> + xdev->common.directions = BIT(DMA_MEM_TO_DEV);
>>
>> chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
>> if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) { @@ -
>2415,6
>> +2416,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
>> chan->direction = DMA_DEV_TO_MEM;
>> chan->id = chan_id;
>> chan->tdest = chan_id - xdev->nr_channels;
>> + xdev->common.directions |= BIT(DMA_DEV_TO_MEM);
>>
>> chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
>> if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) { @@ -
>2629,6
>> +2631,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>> dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
>> }
>>
>> + xdev->common.dst_addr_widths = BIT(addr_width / 8);
>> + xdev->common.src_addr_widths = BIT(addr_width / 8);
>> xdev->common.device_alloc_chan_resources =
>> xilinx_dma_alloc_chan_resources;
>> xdev->common.device_free_chan_resources =
>> --
>> 2.7.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe dmaengine"
>> in the body of a message to majordomo@vger.kernel.org More majordomo
>> info at http://vger.kernel.org/majordomo-info.html
>
>--
>~Vinod
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-01-03 5:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-21 10:11 [LINUX,1/4] dmaengine: xilinx_dma: Fix dma_get_slave_caps() API failures Kedareswara rao Appana
-- strict thread matches above, loose matches on Subject: below --
2018-01-03 3:57 Vinod Koul
2018-01-03 5:09 Appana Durga Kedareswara Rao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).