[v4,5/5] imx8mq.dtsi: add the sdma nodes

[Lucas Stach <l.stach@pengutronix.de>]

Am Donnerstag, den 24.01.2019, 19:55 -0700 schrieb Angus Ainslie (Purism):
> Add the sdma nodes to the base devicetree for the imx8mq
> 
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

One nit below, with that fixed:

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

You might need to split this patch out from the series and send it to
Shawn separately after the dmaengine changes have been accepted.

regards,
Lucas

> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 28 +++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index c0402375e7c1..f0cd3675ead0 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -336,6 +336,17 @@
> >  				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
> >  				status = "disabled";
> >  			};
> +
> > > +			sdma2: sdma@302c0000 {
> > +				compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
> > +				reg = <0x302c0000 0x10000>;
> > +				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
> +					<&clk IMX8MQ_CLK_SDMA2_ROOT>;

Some spaces to align the second clock reference as in the rest of this
file, please.

> +				clock-names = "ipg", "ahb";
> > +				#dma-cells = <3>;
> > +				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
> > +			};
> >  		};
>  
> >  		bus@30400000 { /* AIPS2 */
> @@ -370,6 +381,8 @@
> >  				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
> >  				         <&clk IMX8MQ_CLK_UART3_ROOT>;
> >  				clock-names = "ipg", "per";
> > +				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> > +				dma-names = "rx", "tx";
> >  				status = "disabled";
> >  			};
>  
> @@ -381,6 +394,8 @@
> >  				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
> >  				         <&clk IMX8MQ_CLK_UART2_ROOT>;
> >  				clock-names = "ipg", "per";
> > +				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> > +				dma-names = "rx", "tx";
> >  				status = "disabled";
> >  			};
>  
> @@ -432,6 +447,8 @@
> >  				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
> >  				         <&clk IMX8MQ_CLK_UART4_ROOT>;
> >  				clock-names = "ipg", "per";
> > +				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
> > +				dma-names = "rx", "tx";
> >  				status = "disabled";
> >  			};
>  
> @@ -465,6 +482,17 @@
> >  				status = "disabled";
> >  			};
>  
> > > +			sdma1: sdma@30bd0000 {
> > +				compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
> > +				reg = <0x30bd0000 0x10000>;
> > +				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
> > +					<&clk IMX8MQ_CLK_AHB>;
> > +				clock-names = "ipg", "ahb";
> > +				#dma-cells = <3>;
> > +				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
> > +			};
> +
> > >  			fec1: ethernet@30be0000 {
> >  				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
> >  				reg = <0x30be0000 0x10000>;