From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Vinod Koul <vinod.koul@intel.com>, dmaengine@vger.kernel.org
Cc: "Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
"Antoine Tenart" <antoine.tenart@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Nadav Haklai" <nadavh@marvell.com>,
"Shadi Ammouri" <shadi@marvell.com>,
"Omri Itach" <omrii@marvell.com>,
"Hanna Hawa" <hannah@marvell.com>,
"Igal Liberman" <igall@marvell.com>,
"Marcin Wojtas" <mw@semihalf.com>
Subject: dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
Date: Wed, 14 Feb 2018 17:27:33 +0100 [thread overview]
Message-ID: <20180214162733.4591-1-gregory.clement@bootlin.com> (raw)
On the CP110 components whic are present on the Armada 7K/8K SoC we need
to explicitly enable the registers clock. However it is not needed for
the AP8xx componenet, that's why this clock is optional.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../devicetree/bindings/dma/mv-xor-v2.txt | 6 +++++-
drivers/dma/mv_xor_v2.c | 23 +++++++++++++++++-----
2 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
index 217a90eaabe7..9c38bbe7e6d7 100644
--- a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
+++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
@@ -11,7 +11,11 @@ Required properties:
interrupts.
Optional properties:
-- clocks: Optional reference to the clock used by the XOR engine.
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
+
Example:
diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c
index f652a0e0f5a2..93b3d80ce701 100644
--- a/drivers/dma/mv_xor_v2.c
+++ b/drivers/dma/mv_xor_v2.c
@@ -163,6 +163,7 @@ struct mv_xor_v2_device {
void __iomem *dma_base;
void __iomem *glob_base;
struct clk *clk;
+ struct clk *reg_clk;
struct tasklet_struct irq_tasklet;
struct list_head free_sw_desc;
struct dma_device dmadev;
@@ -749,13 +750,24 @@ static int mv_xor_v2_probe(struct platform_device *pdev)
if (ret)
return ret;
- xor_dev->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(xor_dev->clk) && PTR_ERR(xor_dev->clk) == -EPROBE_DEFER)
+ xor_dev->reg_clk = devm_clk_get(&pdev->dev, "reg");
+ if (!IS_ERR(xor_dev->reg_clk)) {
+ ret = clk_prepare_enable(xor_dev->reg_clk);
+ if (ret)
+ return ret;
+ } else if (PTR_ERR(xor_dev->reg_clk) == -EPROBE_DEFER) {
return -EPROBE_DEFER;
+ }
+
+ xor_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(xor_dev->clk) && PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) {
+ ret = EPROBE_DEFER;
+ goto disable_reg_clk;
+ }
if (!IS_ERR(xor_dev->clk)) {
ret = clk_prepare_enable(xor_dev->clk);
if (ret)
- return ret;
+ goto disable_reg_clk;
}
ret = platform_msi_domain_alloc_irqs(&pdev->dev, 1,
@@ -866,8 +878,9 @@ static int mv_xor_v2_probe(struct platform_device *pdev)
free_msi_irqs:
platform_msi_domain_free_irqs(&pdev->dev);
disable_clk:
- if (!IS_ERR(xor_dev->clk))
- clk_disable_unprepare(xor_dev->clk);
+ clk_disable_unprepare(xor_dev->clk);
+disable_reg_clk:
+ clk_disable_unprepare(xor_dev->reg_clk);
return ret;
}
next reply other threads:[~2018-02-14 16:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-14 16:27 Gregory CLEMENT [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-02-27 15:15 dmaengine: mv_xor_v2: Fix clock resource by adding a register clock Vinod Koul
2018-02-27 15:19 Gregory CLEMENT
2018-03-01 8:25 Vinod Koul
2018-03-01 8:37 Gregory CLEMENT
2018-03-02 4:23 Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180214162733.4591-1-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=dmaengine@vger.kernel.org \
--cc=hannah@marvell.com \
--cc=igall@marvell.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=omrii@marvell.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shadi@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).