[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[Radhey Shyam Pandey]

AXIDMA IP sets completion bit to 1 when the transfer is completed. Read
this bit to move descriptor from active list to the done list. This feature
is needed when interrupt delay timeout and IRQThreshold is enabled i.e
Dly_IrqEn is triggered w/o completing Interrupt Threshold.

Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
---
 drivers/dma/xilinx/xilinx_dma.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 36e1ab9..518465e 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -103,6 +103,7 @@
 #define XILINX_DMA_PARK_PTR_RD_REF_SHIFT	0
 #define XILINX_DMA_PARK_PTR_RD_REF_MASK		GENMASK(4, 0)
 #define XILINX_DMA_REG_VDMA_VERSION		0x002c
+#define XILINX_DMA_COMP_MASK			BIT(31)
 
 /* Register Direct Mode Registers */
 #define XILINX_DMA_REG_VSIZE			0x0000
@@ -1387,16 +1388,25 @@ static void xilinx_dma_issue_pending(struct dma_chan *dchan)
 static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
 {
 	struct xilinx_dma_tx_descriptor *desc, *next;
+	struct xilinx_axidma_tx_segment *seg;
 
 	/* This function was invoked with lock held */
 	if (list_empty(&chan->active_list))
 		return;
 
 	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
-		list_del(&desc->node);
-		if (!desc->cyclic)
-			dma_cookie_complete(&desc->async_tx);
-		list_add_tail(&desc->node, &chan->done_list);
+
+		seg = list_last_entry(&desc->segments,
+				      struct xilinx_axidma_tx_segment, node);
+		if ((seg->hw.status & XILINX_DMA_COMP_MASK) ||
+			(!chan->xdev->has_axieth_connected)) {
+			list_del(&desc->node);
+			if (!desc->cyclic)
+				dma_cookie_complete(&desc->async_tx);
+			list_add_tail(&desc->node, &chan->done_list);
+		} else {
+			break;
+		}
 	}
 }
 

[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[Vinod Koul]

On Mon, Apr 02, 2018 at 04:09:04PM +0530, Radhey Shyam Pandey wrote:
> AXIDMA IP sets completion bit to 1 when the transfer is completed. Read
> this bit to move descriptor from active list to the done list. This feature
> is needed when interrupt delay timeout and IRQThreshold is enabled i.e
> Dly_IrqEn is triggered w/o completing Interrupt Threshold.
> 
> Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
> ---
>  drivers/dma/xilinx/xilinx_dma.c |   18 ++++++++++++++----
>  1 files changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 36e1ab9..518465e 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -103,6 +103,7 @@
>  #define XILINX_DMA_PARK_PTR_RD_REF_SHIFT	0
>  #define XILINX_DMA_PARK_PTR_RD_REF_MASK		GENMASK(4, 0)
>  #define XILINX_DMA_REG_VDMA_VERSION		0x002c
> +#define XILINX_DMA_COMP_MASK			BIT(31)
>  
>  /* Register Direct Mode Registers */
>  #define XILINX_DMA_REG_VSIZE			0x0000
> @@ -1387,16 +1388,25 @@ static void xilinx_dma_issue_pending(struct dma_chan *dchan)
>  static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
>  {
>  	struct xilinx_dma_tx_descriptor *desc, *next;
> +	struct xilinx_axidma_tx_segment *seg;
>  
>  	/* This function was invoked with lock held */
>  	if (list_empty(&chan->active_list))
>  		return;
>  
>  	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
> -		list_del(&desc->node);
> -		if (!desc->cyclic)
> -			dma_cookie_complete(&desc->async_tx);
> -		list_add_tail(&desc->node, &chan->done_list);
> +
> +		seg = list_last_entry(&desc->segments,
> +				      struct xilinx_axidma_tx_segment, node);
> +		if ((seg->hw.status & XILINX_DMA_COMP_MASK) ||
> +			(!chan->xdev->has_axieth_connected)) {

why the second case ? That is not expalined in log?

> +			list_del(&desc->node);
> +			if (!desc->cyclic)
> +				dma_cookie_complete(&desc->async_tx);
> +			list_add_tail(&desc->node, &chan->done_list);
> +		} else {
> +			break;
> +		}
>  	}
>  }
>  
> -- 
> 1.7.1
>

[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[Radhey Shyam Pandey]

Hi  Vinod,

> -----Original Message-----
> From: Vinod Koul [mailto:vinod.koul@intel.com]
> Sent: Wednesday, April 11, 2018 2:41 PM
> To: Radhey Shyam Pandey <radheys@xilinx.com>
> Cc: dan.j.williams@intel.com; michal.simek@xilinx.com; Appana Durga
> Kedareswara Rao <appanad@xilinx.com>; Radhey Shyam Pandey
> <radheys@xilinx.com>; lars@metafoo.de; dmaengine@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [RFC 4/6] dmaengine: xilinx_dma: Freeup active list based on
> descriptor completion bit
> 
> On Mon, Apr 02, 2018 at 04:09:04PM +0530, Radhey Shyam Pandey wrote:
> > AXIDMA IP sets completion bit to 1 when the transfer is completed. Read
> > this bit to move descriptor from active list to the done list. This feature
> > is needed when interrupt delay timeout and IRQThreshold is enabled i.e
> > Dly_IrqEn is triggered w/o completing Interrupt Threshold.
> >
> > Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
> > ---
> >  drivers/dma/xilinx/xilinx_dma.c |   18 ++++++++++++++----
> >  1 files changed, 14 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_dma.c
> b/drivers/dma/xilinx/xilinx_dma.c
> > index 36e1ab9..518465e 100644
> > --- a/drivers/dma/xilinx/xilinx_dma.c
> > +++ b/drivers/dma/xilinx/xilinx_dma.c
> > @@ -103,6 +103,7 @@
> >  #define XILINX_DMA_PARK_PTR_RD_REF_SHIFT	0
> >  #define XILINX_DMA_PARK_PTR_RD_REF_MASK		GENMASK(4,
> 0)
> >  #define XILINX_DMA_REG_VDMA_VERSION		0x002c
> > +#define XILINX_DMA_COMP_MASK			BIT(31)
> >
> >  /* Register Direct Mode Registers */
> >  #define XILINX_DMA_REG_VSIZE			0x0000
> > @@ -1387,16 +1388,25 @@ static void xilinx_dma_issue_pending(struct
> dma_chan *dchan)
> >  static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
> >  {
> >  	struct xilinx_dma_tx_descriptor *desc, *next;
> > +	struct xilinx_axidma_tx_segment *seg;
> >
> >  	/* This function was invoked with lock held */
> >  	if (list_empty(&chan->active_list))
> >  		return;
> >
> >  	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
> > -		list_del(&desc->node);
> > -		if (!desc->cyclic)
> > -			dma_cookie_complete(&desc->async_tx);
> > -		list_add_tail(&desc->node, &chan->done_list);
> > +
> > +		seg = list_last_entry(&desc->segments,
> > +				      struct xilinx_axidma_tx_segment, node);
> > +		if ((seg->hw.status & XILINX_DMA_COMP_MASK) ||
> > +			(!chan->xdev->has_axieth_connected)) {
> 
> why the second case ? That is not expalined in log?
In the current implementation, delay timeout is enabled only for
has_axieth_connected usecase. For ethernet, we need real-time processing
while still having benefit of interrupt coalescing. Example: In RX interrupt
coalescing is set to 0x3.  Without delay timeout, DMA engine will wait for
all frames and then issue completion interrupt. In ethernet usecase, this
can introduce huge latencies. Delay timeout interrupt will trigger if delay
time period has expired and we can notify dma client with received frames.

The second case is added to keep the previous implementation as is.(i.e when
Delay timeout interrupt is not enabled - move all active desc to done list). 
Sure I will add a description for it in the commit log.

> 
> > +			list_del(&desc->node);
> > +			if (!desc->cyclic)
> > +				dma_cookie_complete(&desc->async_tx);
> > +			list_add_tail(&desc->node, &chan->done_list);
> > +		} else {
> > +			break;
> > +		}
> >  	}
> >  }
> >
> > --
> > 1.7.1
> >
> 
> --
> ~Vinod
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[Vinod Koul]

On Tue, Apr 17, 2018 at 12:28:52PM +0000, Radhey Shyam Pandey wrote:

> > > +		if ((seg->hw.status & XILINX_DMA_COMP_MASK) ||
> > > +			(!chan->xdev->has_axieth_connected)) {
> > 
> > why the second case ? That is not expalined in log?
> In the current implementation, delay timeout is enabled only for
> has_axieth_connected usecase. For ethernet, we need real-time processing
> while still having benefit of interrupt coalescing. Example: In RX interrupt
> coalescing is set to 0x3.  Without delay timeout, DMA engine will wait for
> all frames and then issue completion interrupt. In ethernet usecase, this
> can introduce huge latencies. Delay timeout interrupt will trigger if delay
> time period has expired and we can notify dma client with received frames.
> 
> The second case is added to keep the previous implementation as is.(i.e when
> Delay timeout interrupt is not enabled - move all active desc to done list). 
> Sure I will add a description for it in the commit log.

That should help, it didn't seem to have anything to do with log or other
changes, please keep in mind again that changelog should describe the change
and help ppl review...