From: Angelo Dureghello <angelo@sysam.it>
To: dmaengine@vger.kernel.org, vkoul@kernel.org
Cc: linux-m68k@vger.kernel.org
Subject: [v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
Date: Tue, 5 Jun 2018 23:45:24 +0200 [thread overview]
Message-ID: <20180605214524.GA2039@jerusalem> (raw)
This patch adds Kconfig and makefile changes to add ColdFire
mcf5441x family edma support.
A new fsl-edma-common module has been added, to collect common
code to fsl-edma.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- patch splitted into 4
- add fsl-edma-common
---
drivers/dma/Kconfig | 18 ++++++++++++++++++
drivers/dma/Makefile | 2 ++
2 files changed, 20 insertions(+)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6d61cd023633..9539e2fc2f94 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -220,11 +220,17 @@ config FSL_EDMA
depends on OF
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
+ select FSL_EDMA_COMMON
help
Support the Freescale eDMA engine with programmable channel
multiplexing capability for DMA request sources(slot).
This module can be found on Freescale Vybrid and LS-1 SoCs.
+config FSL_EDMA_COMMON
+ bool
+ depends on FSL_EDMA || MCF_EDMA
+ default n
+
config FSL_RAID
tristate "Freescale RAID engine Support"
depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
@@ -327,6 +333,18 @@ config LPC18XX_DMAMUX
Enable support for DMA on NXP LPC18xx/43xx platforms
with PL080 and multiplexed DMA request lines.
+config MCF_EDMA
+ tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
+ depends on M5441x
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ select FSL_EDMA_COMMON
+ help
+ Support the Freescale ColdFire eDMA engine, 64-channel
+ implementation that performs complex data transfers with
+ minimal intervention from a host processor.
+ This module can be found on Freescale ColdFire mcf5441x SoCs.
+
config MMP_PDMA
bool "MMP PDMA support"
depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0f62a4d49aab..823a590f308b 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -33,6 +33,8 @@ obj-$(CONFIG_DW_DMAC_CORE) += dw/
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
+obj-$(CONFIG_FSL_EDMA_COMMON) += fsl-edma-common.o
+obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
obj-$(CONFIG_FSL_RAID) += fsl_raid.o
obj-$(CONFIG_HSU_DMA) += hsu/
obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
next reply other threads:[~2018-06-05 21:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 21:45 Angelo Dureghello [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-06-06 7:21 [v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma Geert Uytterhoeven
2018-06-06 11:16 Angelo Dureghello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180605214524.GA2039@jerusalem \
--to=angelo@sysam.it \
--cc=dmaengine@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).