From: Wen He <wen.he_1@nxp.com>
To: vkoul@kernel.org, dmaengine@vger.kernel.org
Cc: robh+dt@kernel.org, leoyang.li@nxp.com, jiafei.pan@nxp.com,
peng.ma@nxp.com, wen.he_1@nxp.com
Subject: [v8,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
Date: Fri, 17 Aug 2018 10:54:12 +0800 [thread overview]
Message-ID: <20180817025417.37388-2-wen.he_1@nxp.com> (raw)
This patch add the macro FSL_DMA_IN/OUT implement for ARM platform.
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
drivers/dma/fsldma.h | 57 ++++++++++++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 19 deletions(-)
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 982845b..1dc64c9 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -196,39 +196,58 @@ struct fsldma_chan {
#define to_fsl_desc(lh) container_of(lh, struct fsl_desc_sw, node)
#define tx_to_fsl_desc(tx) container_of(tx, struct fsl_desc_sw, async_tx)
+#ifdef CONFIG_PPC
+#define fsl_ioread32(p) in_le32(p)
+#define fsl_ioread32be(p) in_be32(p)
+#define fsl_iowrite32(v, p) out_le32(p, v)
+#define fsl_iowrite32be(v, p) out_be32(p, v)
+
#ifndef __powerpc64__
-static u64 in_be64(const u64 __iomem *addr)
+static u64 fsl_ioread64(const u64 __iomem *addr)
{
- return ((u64)in_be32((u32 __iomem *)addr) << 32) |
- (in_be32((u32 __iomem *)addr + 1));
+ return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
+ (in_le32((u32 __iomem *)addr));
}
-static void out_be64(u64 __iomem *addr, u64 val)
+static void fsl_iowrite64(u64 val, u64 __iomem *addr)
{
- out_be32((u32 __iomem *)addr, val >> 32);
- out_be32((u32 __iomem *)addr + 1, (u32)val);
+ out_le32((u32 __iomem *)addr + 1, val >> 32);
+ out_le32((u32 __iomem *)addr, (u32)val);
}
-/* There is no asm instructions for 64 bits reverse loads and stores */
-static u64 in_le64(const u64 __iomem *addr)
+static u64 fsl_ioread64be(const u64 __iomem *addr)
{
- return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
- (in_le32((u32 __iomem *)addr));
+ return ((u64)in_be32((u32 __iomem *)addr) << 32) |
+ (in_be32((u32 __iomem *)addr + 1));
}
-static void out_le64(u64 __iomem *addr, u64 val)
+static void fsl_iowrite64be(u64 val, u64 __iomem *addr)
{
- out_le32((u32 __iomem *)addr + 1, val >> 32);
- out_le32((u32 __iomem *)addr, (u32)val);
+ out_be32((u32 __iomem *)addr, val >> 32);
+ out_be32((u32 __iomem *)addr + 1, (u32)val);
}
#endif
+#endif
-#define FSL_DMA_IN(fsl_chan, addr, width) \
- (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- in_be##width(addr) : in_le##width(addr))
-#define FSL_DMA_OUT(fsl_chan, addr, val, width) \
- (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- out_be##width(addr, val) : out_le##width(addr, val))
+#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
+#define fsl_ioread32(p) ioread32(p)
+#define fsl_ioread32be(p) ioread32be(p)
+#define fsl_iowrite32(v, p) iowrite32(v, p)
+#define fsl_iowrite32be(v, p) iowrite32be(v, p)
+#define fsl_ioread64(p) ioread64(p)
+#define fsl_ioread64be(p) ioread64be(p)
+#define fsl_iowrite64(v, p) iowrite64(v, p)
+#define fsl_iowrite64be(v, p) iowrite64be(v, p)
+#endif
+
+#define FSL_DMA_IN(fsl_dma, addr, width) \
+ (((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ fsl_ioread##width##be(addr) : fsl_ioread##width(addr))
+
+#define FSL_DMA_OUT(fsl_dma, addr, val, width) \
+ (((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ fsl_iowrite##width##be(val, addr) : fsl_iowrite \
+ ##width(val, addr))
#define DMA_TO_CPU(fsl_chan, d, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
next reply other threads:[~2018-08-17 2:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-17 2:54 Wen He [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-08-27 6:35 [v8,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180817025417.37388-2-wen.he_1@nxp.com \
--to=wen.he_1@nxp.com \
--cc=dmaengine@vger.kernel.org \
--cc=jiafei.pan@nxp.com \
--cc=leoyang.li@nxp.com \
--cc=peng.ma@nxp.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox