* [v11,5/7] arm64: dts: ls1043a: add qdma device tree nodes
@ 2018-12-06 1:04 Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2018-12-06 1:04 UTC (permalink / raw)
To: Peng Ma
Cc: vkoul, robh+dt, mark.rutland, leoyang.li, dan.j.williams, zw,
dmaengine, devicetree, linux-kernel, linux-arm-kernel,
linuxppc-dev, Wen He
On Tue, Oct 30, 2018 at 10:36:02AM +0800, Peng Ma wrote:
> add the qDMA device tree nodes for LS1043A devices.
>
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> ---
> change in v11:
> - no
>
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 22 ++++++++++++++++++++++
> 1 files changed, 22 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 7881e3d..d560141 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -734,6 +734,28 @@
> <0000 0 0 3 &gic 0 156 0x4>,
> <0000 0 0 4 &gic 0 157 0x4>;
> };
> +
> + qdma: dma-controller@8380000 {
> + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
> + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
> + <0x0 0x8390000 0x0 0x10000>, /* Status regs */
> + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
> + interrupts = <0 153 0x4>,
> + <0 39 0x4>,
> + <0 40 0x4>,
> + <0 41 0x4>,
> + <0 42 0x4>;
I know this dts file did not use GIC_SPI and IRQ_TYPE_xxx defines from
the beginning. But please use them for new additions.
Shawn
> + interrupt-names = "qdma-error", "qdma-queue0",
> + "qdma-queue1", "qdma-queue2", "qdma-queue3";
> + dma-channels = <8>;
> + block-number = <1>;
> + block-offset = <0x10000>;
> + fsl,dma-queues = <2>;
> + status-sizes = <64>;
> + queue-sizes = <64 64>;
> + big-endian;
> + };
> +
> };
>
> firmware {
> --
> 1.7.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread* [v11,5/7] arm64: dts: ls1043a: add qdma device tree nodes
@ 2018-10-30 2:36 Peng Ma
0 siblings, 0 replies; 2+ messages in thread
From: Peng Ma @ 2018-10-30 2:36 UTC (permalink / raw)
To: vkoul
Cc: robh+dt, mark.rutland, shawnguo, leoyang.li, dan.j.williams, zw,
dmaengine, devicetree, linux-kernel, linux-arm-kernel,
linuxppc-dev, Peng Ma, Wen He
add the qDMA device tree nodes for LS1043A devices.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
change in v11:
- no
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d..d560141 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -734,6 +734,28 @@
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
};
+
+ qdma: dma-controller@8380000 {
+ compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 153 0x4>,
+ <0 39 0x4>,
+ <0 40 0x4>,
+ <0 41 0x4>,
+ <0 42 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue0",
+ "qdma-queue1", "qdma-queue2", "qdma-queue3";
+ dma-channels = <8>;
+ block-number = <1>;
+ block-offset = <0x10000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
};
firmware {
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-12-06 1:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-06 1:04 [v11,5/7] arm64: dts: ls1043a: add qdma device tree nodes Shawn Guo
-- strict thread matches above, loose matches on Subject: below --
2018-10-30 2:36 Peng Ma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).