[4/8,v2] dma: k3dma: Delete axi_config

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Fri, Jan 04, 2019 at 12:56:24PM -0800, John Stultz wrote:
> From: Li Yu <liyu65@hisilicon.com>
> 
> Axi_config controls whether DMA resources can be accessed in non-secure
> mode, such as linux kernel. The register should be set by the bootloader
> stage and depends on the device.
> 
> Thus, this patch removes axi_config from k3dma driver.
> 
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Tanglei Han <hantanglei@huawei.com>
> Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
> Cc: Ryan Grachek <ryan@edited.us>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Cc: dmaengine@vger.kernel.org
> Signed-off-by: Li Yu <liyu65@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> [jstultz: Minor tweaks to commit message]
> Signed-off-by: John Stultz <john.stultz@linaro.org>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/dma/k3dma.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
> index df61406..b2060bf 100644
> --- a/drivers/dma/k3dma.c
> +++ b/drivers/dma/k3dma.c
> @@ -52,8 +52,6 @@
>  #define CX_SRC			0x814
>  #define CX_DST			0x818
>  #define CX_CFG			0x81c
> -#define AXI_CFG			0x820
> -#define AXI_CFG_DEFAULT		0x201201
>  
>  #define CX_LLI_CHAIN_EN		0x2
>  #define CX_CFG_EN		0x1
> @@ -168,7 +166,6 @@ static void k3_dma_set_desc(struct k3_dma_phy *phy, struct k3_desc_hw *hw)
>  	writel_relaxed(hw->count, phy->base + CX_CNT0);
>  	writel_relaxed(hw->saddr, phy->base + CX_SRC);
>  	writel_relaxed(hw->daddr, phy->base + CX_DST);
> -	writel_relaxed(AXI_CFG_DEFAULT, phy->base + AXI_CFG);
>  	writel_relaxed(hw->config, phy->base + CX_CFG);
>  }
>  
> -- 
> 2.7.4
>