[PATCH] dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size

[Grygorii Strashko <grygorii.strashko@ti.com>]

Optimize struct psil_endpoint_config for size by
- reordering fields
- grouping bitfields
- change mapped_channel_id type to s16 (32K channel is enough)
- default_flow_id type to s16 as it's assigned to -1

before:
text            data     bss    dec	        hex	filename
12654100	5211472	 666904	18532476	11ac87c	vmlinux

after:
12654100	5208528	 666904	18529532	11abcfc	vmlinux

diff: 2944 bytes

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 include/linux/dma/k3-psil.h | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/include/linux/dma/k3-psil.h b/include/linux/dma/k3-psil.h
index 36e22c5a0f29..5f106d852f1c 100644
--- a/include/linux/dma/k3-psil.h
+++ b/include/linux/dma/k3-psil.h
@@ -42,14 +42,14 @@ enum psil_endpoint_type {
 /**
  * struct psil_endpoint_config - PSI-L Endpoint configuration
  * @ep_type:		PSI-L endpoint type
+ * @channel_tpl:	Desired throughput level for the channel
  * @pkt_mode:		If set, the channel must be in Packet mode, otherwise in
  *			TR mode
  * @notdpkt:		TDCM must be suppressed on the TX channel
  * @needs_epib:		Endpoint needs EPIB
- * @psd_size:		If set, PSdata is used by the endpoint
- * @channel_tpl:	Desired throughput level for the channel
  * @pdma_acc32:		ACC32 must be enabled on the PDMA side
  * @pdma_burst:		BURST must be enabled on the PDMA side
+ * @psd_size:		If set, PSdata is used by the endpoint
  * @mapped_channel_id:	PKTDMA thread to channel mapping for mapped channels.
  *			The thread must be serviced by the specified channel if
  *			mapped_channel_id is >= 0 in case of PKTDMA
@@ -62,23 +62,22 @@ enum psil_endpoint_type {
  */
 struct psil_endpoint_config {
 	enum psil_endpoint_type ep_type;
+	enum udma_tp_level channel_tpl;
 
 	unsigned pkt_mode:1;
 	unsigned notdpkt:1;
 	unsigned needs_epib:1;
-	u32 psd_size;
-	enum udma_tp_level channel_tpl;
-
 	/* PDMA properties, valid for PSIL_EP_PDMA_* */
 	unsigned pdma_acc32:1;
 	unsigned pdma_burst:1;
 
+	u32 psd_size;
 	/* PKDMA mapped channel */
-	int mapped_channel_id;
+	s16 mapped_channel_id;
 	/* PKTDMA tflow and rflow ranges for mapped channel */
 	u16 flow_start;
 	u16 flow_num;
-	u16 default_flow_id;
+	s16 default_flow_id;
 };
 
 int psil_set_new_ep_config(struct device *dev, const char *name,
-- 
2.17.1