From: Xiaochen Shen <xiaochen.shen@intel.com>
To: vkoul@kernel.org, fenghua.yu@intel.com, dave.jiang@intel.com,
dmaengine@vger.kernel.org
Cc: ramesh.thomas@intel.com, tony.luck@intel.com, tony.zhu@intel.com,
pei.p.jia@intel.com, xiaochen.shen@intel.com
Subject: [PATCH 1/2] dmaengine: idxd: Fix max batch size for Intel IAA
Date: Mon, 8 Aug 2022 11:19:21 +0800 [thread overview]
Message-ID: <20220808031922.29751-2-xiaochen.shen@intel.com> (raw)
In-Reply-To: <20220808031922.29751-1-xiaochen.shen@intel.com>
From Intel IAA spec [1], Intel IAA does not support batch processing.
Two batch related default values for IAA are incorrect in current code:
(1) The max batch size of device is set during device initialization,
that indicates batch is supported. It should be always 0 on IAA.
(2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32)
as the default value regardless of Intel DSA or IAA device during
work queue setup and cleanup. It should be always 0 on IAA.
Fix the issues by setting the max batch size of device and max batch
size of work queue to 0 on IAA device, that means batch is not
supported.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: 23084545dbb0 ("dmaengine: idxd: set max_xfer and max_batch for RO device")
Fixes: 92452a72ebdf ("dmaengine: idxd: set defaults for wq configs")
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
---
drivers/dma/idxd/device.c | 6 +++---
drivers/dma/idxd/idxd.h | 32 ++++++++++++++++++++++++++++++++
drivers/dma/idxd/init.c | 4 ++--
drivers/dma/idxd/sysfs.c | 2 +-
4 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5a8cc52c1abf..cc7aabe4dc84 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -388,7 +388,7 @@ static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
clear_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags);
memset(wq->name, 0, WQ_NAME_SIZE);
wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
- wq->max_batch_size = WQ_DEFAULT_MAX_BATCH;
+ idxd_wq_set_max_batch_size(idxd->data->type, wq, WQ_DEFAULT_MAX_BATCH);
}
static void idxd_wq_device_reset_cleanup(struct idxd_wq *wq)
@@ -863,7 +863,7 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
/* bytes 12-15 */
wq->wqcfg->max_xfer_shift = ilog2(wq->max_xfer_bytes);
- wq->wqcfg->max_batch_shift = ilog2(wq->max_batch_size);
+ idxd_wqcfg_set_max_batch_shift(idxd->data->type, wq->wqcfg, ilog2(wq->max_batch_size));
dev_dbg(dev, "WQ %d CFGs\n", wq->id);
for (i = 0; i < WQCFG_STRIDES(idxd); i++) {
@@ -1031,7 +1031,7 @@ static int idxd_wq_load_config(struct idxd_wq *wq)
wq->priority = wq->wqcfg->priority;
wq->max_xfer_bytes = 1ULL << wq->wqcfg->max_xfer_shift;
- wq->max_batch_size = 1ULL << wq->wqcfg->max_batch_shift;
+ idxd_wq_set_max_batch_size(idxd->data->type, wq, 1U << wq->wqcfg->max_batch_shift);
for (i = 0; i < WQCFG_STRIDES(idxd); i++) {
wqcfg_offset = WQCFG_OFFSET(idxd, wq->id, i);
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index fed0dfc1eaa8..c1617416d379 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -540,6 +540,38 @@ static inline int idxd_wq_refcount(struct idxd_wq *wq)
return wq->client_count;
};
+/*
+ * Intel IAA does not support batch processing.
+ * The max batch size of device, max batch size of wq and
+ * max batch shift of wqcfg should be always 0 on IAA.
+ */
+static inline void idxd_set_max_batch_size(int idxd_type, struct idxd_device *idxd,
+ u32 max_batch_size)
+{
+ if (idxd_type == IDXD_TYPE_IAX)
+ idxd->max_batch_size = 0;
+ else
+ idxd->max_batch_size = max_batch_size;
+}
+
+static inline void idxd_wq_set_max_batch_size(int idxd_type, struct idxd_wq *wq,
+ u32 max_batch_size)
+{
+ if (idxd_type == IDXD_TYPE_IAX)
+ wq->max_batch_size = 0;
+ else
+ wq->max_batch_size = max_batch_size;
+}
+
+static inline void idxd_wqcfg_set_max_batch_shift(int idxd_type, union wqcfg *wqcfg,
+ u32 max_batch_shift)
+{
+ if (idxd_type == IDXD_TYPE_IAX)
+ wqcfg->max_batch_shift = 0;
+ else
+ wqcfg->max_batch_shift = max_batch_shift;
+}
+
int __must_check __idxd_driver_register(struct idxd_device_driver *idxd_drv,
struct module *module, const char *mod_name);
#define idxd_driver_register(driver) \
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index aa3478257ddb..6d03849c698b 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -177,7 +177,7 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
init_completion(&wq->wq_dead);
init_completion(&wq->wq_resurrect);
wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
- wq->max_batch_size = WQ_DEFAULT_MAX_BATCH;
+ idxd_wq_set_max_batch_size(idxd->data->type, wq, WQ_DEFAULT_MAX_BATCH);
wq->enqcmds_retries = IDXD_ENQCMDS_RETRIES;
wq->wqcfg = kzalloc_node(idxd->wqcfg_size, GFP_KERNEL, dev_to_node(dev));
if (!wq->wqcfg) {
@@ -389,7 +389,7 @@ static void idxd_read_caps(struct idxd_device *idxd)
idxd->max_xfer_bytes = 1ULL << idxd->hw.gen_cap.max_xfer_shift;
dev_dbg(dev, "max xfer size: %llu bytes\n", idxd->max_xfer_bytes);
- idxd->max_batch_size = 1U << idxd->hw.gen_cap.max_batch_shift;
+ idxd_set_max_batch_size(idxd->data->type, idxd, 1U << idxd->hw.gen_cap.max_batch_shift);
dev_dbg(dev, "max batch size: %u\n", idxd->max_batch_size);
if (idxd->hw.gen_cap.config_en)
set_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags);
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 3f262a57441b..fa729fac4b97 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -961,7 +961,7 @@ static ssize_t wq_max_batch_size_store(struct device *dev, struct device_attribu
if (batch_size > idxd->max_batch_size)
return -EINVAL;
- wq->max_batch_size = (u32)batch_size;
+ idxd_wq_set_max_batch_size(idxd->data->type, wq, (u32)batch_size);
return count;
}
--
2.18.4
next prev parent reply other threads:[~2022-08-08 2:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-08 3:19 [PATCH 0/2] dmaengine: idxd: Fix max batch size issues for Intel IAA Xiaochen Shen
2022-08-08 3:19 ` Xiaochen Shen [this message]
2022-08-08 3:19 ` [PATCH 2/2] dmaengine: idxd: Make max batch size attributes in sysfs invisible " Xiaochen Shen
2022-09-15 16:21 ` [PATCH 0/2] dmaengine: idxd: Fix max batch size issues " Yu, Fenghua
2022-09-29 16:46 ` Vinod Koul
2022-09-29 17:20 ` Yu, Fenghua
2022-09-30 3:18 ` Xiaochen Shen
2022-09-30 16:18 ` Vinod Koul
2022-10-01 1:31 ` Xiaochen Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220808031922.29751-2-xiaochen.shen@intel.com \
--to=xiaochen.shen@intel.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=fenghua.yu@intel.com \
--cc=pei.p.jia@intel.com \
--cc=ramesh.thomas@intel.com \
--cc=tony.luck@intel.com \
--cc=tony.zhu@intel.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox