[PATCH v6 20/24] dmaengine: dw-edma: Drop DT-region allocation

[Serge Semin <Sergey.Semin@baikalelectronics.ru>]

There is no point in allocating an additional memory for the data target
regions passed then to the client drivers. Just use the already available
structures defined in the dw_edma_chip instance.

Note these regions are unused in normal circumstances since they are
specific to the case of eDMA being embedded into the DW PCIe End-point and
having it's CSRs accessible over a End-point' BAR. This case is only known
to be implemented as a part of the Synopsys PCIe EndPoint IP prototype
kit.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/dw-edma/dw-edma-core.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index 58808bec4148..040a88cfe070 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -738,7 +738,6 @@ static void dw_edma_free_chan_resources(struct dma_chan *dchan)
 static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
 {
 	struct dw_edma_chip *chip = dw->chip;
-	struct dw_edma_region *dt_region;
 	struct device *dev = chip->dev;
 	struct dw_edma_chan *chan;
 	struct dw_edma_irq *irq;
@@ -754,12 +753,6 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
 	for (i = 0; i < ch_cnt; i++) {
 		chan = &dw->chan[i];
 
-		dt_region = devm_kzalloc(dev, sizeof(*dt_region), GFP_KERNEL);
-		if (!dt_region)
-			return -ENOMEM;
-
-		chan->vc.chan.private = dt_region;
-
 		chan->dw = dw;
 
 		if (i < dw->wr_ch_cnt) {
@@ -807,17 +800,11 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
 			 chan->msi.data);
 
 		chan->vc.desc_free = vchan_free_desc;
-		vchan_init(&chan->vc, dma);
+		chan->vc.chan.private = chan->dir == EDMA_DIR_WRITE ?
+					&dw->chip->dt_region_wr[chan->id] :
+					&dw->chip->dt_region_rd[chan->id];
 
-		if (chan->dir == EDMA_DIR_WRITE) {
-			dt_region->paddr = chip->dt_region_wr[chan->id].paddr;
-			dt_region->vaddr = chip->dt_region_wr[chan->id].vaddr;
-			dt_region->sz = chip->dt_region_wr[chan->id].sz;
-		} else {
-			dt_region->paddr = chip->dt_region_rd[chan->id].paddr;
-			dt_region->vaddr = chip->dt_region_rd[chan->id].vaddr;
-			dt_region->sz = chip->dt_region_rd[chan->id].sz;
-		}
+		vchan_init(&chan->vc, dma);
 
 		dw_edma_v0_core_device_config(chan);
 	}
-- 
2.38.0