From: Lu Baolu <baolu.lu@linux.intel.com>
To: iommu@lists.linux.dev, dmaengine@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Kevin Tian <kevin.tian@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Dave Jiang <dave.jiang@intel.com>, Vinod Koul <vkoul@kernel.org>,
linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH 1/2] dmaengine: idxd: Add enable/disable device IOPF feature
Date: Fri, 3 Feb 2023 16:44:55 +0800 [thread overview]
Message-ID: <20230203084456.469641-1-baolu.lu@linux.intel.com> (raw)
The iommu subsystem requires IOMMU_DEV_FEAT_IOPF must be enabled before
and disabled after IOMMU_DEV_FEAT_SVA, if device's I/O page faults rely
on the IOMMU. Add explicit IOMMU_DEV_FEAT_IOPF enabling/disabling in this
driver.
At present, missing IOPF enabling/disabling doesn't cause any real issue,
because the IOMMU driver places the IOPF enabling/disabling in the path
of SVA feature handling. But this may change.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/dma/idxd/init.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index 529ea09c9094..d5a709a842a8 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -511,6 +511,27 @@ static void idxd_disable_system_pasid(struct idxd_device *idxd)
idxd->sva = NULL;
}
+static int idxd_enable_sva(struct pci_dev *pdev)
+{
+ int ret;
+
+ ret = iommu_dev_enable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
+ if (ret)
+ return ret;
+
+ ret = iommu_dev_enable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
+ if (ret)
+ iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
+
+ return ret;
+}
+
+static void idxd_disable_sva(struct pci_dev *pdev)
+{
+ iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
+ iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
+}
+
static int idxd_probe(struct idxd_device *idxd)
{
struct pci_dev *pdev = idxd->pdev;
@@ -525,7 +546,7 @@ static int idxd_probe(struct idxd_device *idxd)
dev_dbg(dev, "IDXD reset complete\n");
if (IS_ENABLED(CONFIG_INTEL_IDXD_SVM) && sva) {
- if (iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA)) {
+ if (idxd_enable_sva(pdev)) {
dev_warn(dev, "Unable to turn on user SVA feature.\n");
} else {
set_bit(IDXD_FLAG_USER_PASID_ENABLED, &idxd->flags);
@@ -573,21 +594,19 @@ static int idxd_probe(struct idxd_device *idxd)
if (device_pasid_enabled(idxd))
idxd_disable_system_pasid(idxd);
if (device_user_pasid_enabled(idxd))
- iommu_dev_disable_feature(dev, IOMMU_DEV_FEAT_SVA);
+ idxd_disable_sva(pdev);
return rc;
}
static void idxd_cleanup(struct idxd_device *idxd)
{
- struct device *dev = &idxd->pdev->dev;
-
perfmon_pmu_remove(idxd);
idxd_cleanup_interrupts(idxd);
idxd_cleanup_internals(idxd);
if (device_pasid_enabled(idxd))
idxd_disable_system_pasid(idxd);
if (device_user_pasid_enabled(idxd))
- iommu_dev_disable_feature(dev, IOMMU_DEV_FEAT_SVA);
+ idxd_disable_sva(idxd->pdev);
}
static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -705,7 +724,7 @@ static void idxd_remove(struct pci_dev *pdev)
pci_free_irq_vectors(pdev);
pci_iounmap(pdev, idxd->reg_base);
if (device_user_pasid_enabled(idxd))
- iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
+ idxd_disable_sva(pdev);
pci_disable_device(pdev);
destroy_workqueue(idxd->wq);
perfmon_pmu_remove(idxd);
--
2.34.1
next reply other threads:[~2023-02-03 8:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-03 8:44 Lu Baolu [this message]
2023-02-03 8:44 ` [PATCH 2/2] iommu/vt-d: Move iopf code from SVA to IOPF enabling path Lu Baolu
2023-02-06 3:28 ` Tian, Kevin
2023-02-07 6:30 ` Baolu Lu
2023-02-03 16:08 ` [PATCH 1/2] dmaengine: idxd: Add enable/disable device IOPF feature Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203084456.469641-1-baolu.lu@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=fenghua.yu@intel.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).