[RFC PATCH 11/11] dmaengine: dw-edma: Fix to enable to issue dma request on DMA processing

[Shunsuke Mie <mie@igel.co.jp>]

The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
---
 drivers/dma/dw-edma/dw-edma-core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index c527af00ff4e..430f9ee0d9e8 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -308,9 +308,12 @@ static void dw_edma_device_issue_pending(struct dma_chan *dchan)
 	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
 	unsigned long flags;
 
+	if (!chan->configured)
+		return;
+
 	spin_lock_irqsave(&chan->vc.lock, flags);
-	if (chan->configured && chan->request == EDMA_REQ_NONE &&
-	    chan->status == EDMA_ST_IDLE && vchan_issue_pending(&chan->vc)) {
+	if (vchan_issue_pending(&chan->vc) && chan->request == EDMA_REQ_NONE &&
+	    chan->status == EDMA_ST_IDLE) {
 		chan->status = EDMA_ST_BUSY;
 		dw_edma_start_transfer(chan);
 	}
-- 
2.25.1