[PATCH AUTOSEL 6.1 1/5] dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH

[PATCH AUTOSEL 6.1 1/5] dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH

[Sasha Levin]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 306f5df81fcc89b462fbeb9dbe26d9a8ad7c7582 ]

For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and
macOS preserves the upper bits when setting the configuration in the
lower ones. If we reset the upper bits to 0, this causes framing errors
on suspend/resume (the data stream "tears" and channels get swapped
around). Keeping the upper bits untouched, like the macOS driver does,
fixes this issue.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/apple-admac.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/apple-admac.c b/drivers/dma/apple-admac.c
index 4cf8da77bdd9..cac4532fe23a 100644
--- a/drivers/dma/apple-admac.c
+++ b/drivers/dma/apple-admac.c
@@ -56,6 +56,8 @@
 
 #define REG_BUS_WIDTH(ch)	(0x8040 + (ch) * 0x200)
 
+#define BUS_WIDTH_WORD_SIZE	GENMASK(3, 0)
+#define BUS_WIDTH_FRAME_SIZE	GENMASK(7, 4)
 #define BUS_WIDTH_8BIT		0x00
 #define BUS_WIDTH_16BIT		0x01
 #define BUS_WIDTH_32BIT		0x02
@@ -739,7 +741,8 @@ static int admac_device_config(struct dma_chan *chan,
 	struct admac_data *ad = adchan->host;
 	bool is_tx = admac_chan_direction(adchan->no) == DMA_MEM_TO_DEV;
 	int wordsize = 0;
-	u32 bus_width = 0;
+	u32 bus_width = readl_relaxed(ad->base + REG_BUS_WIDTH(adchan->no)) &
+		~(BUS_WIDTH_WORD_SIZE | BUS_WIDTH_FRAME_SIZE);
 
 	switch (is_tx ? config->dst_addr_width : config->src_addr_width) {
 	case DMA_SLAVE_BUSWIDTH_1_BYTE:
-- 
2.43.0

[PATCH AUTOSEL 6.1 4/5] dmaengine: shdma: increase size of 'dev_id'

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'

drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                                  ^~
In function ‘sh_dmae_chan_probe’,
    inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
  540 |                 snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sh/shdma.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
index 9c121a4b33ad..f97d80343aea 100644
--- a/drivers/dma/sh/shdma.h
+++ b/drivers/dma/sh/shdma.h
@@ -25,7 +25,7 @@ struct sh_dmae_chan {
 	const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
 	int xmit_shift;			/* log_2(bytes_per_xfer) */
 	void __iomem *base;
-	char dev_id[16];		/* unique name per DMAC of channel */
+	char dev_id[32];		/* unique name per DMAC of channel */
 	int pm_error;
 	dma_addr_t slave_addr;
 };
-- 
2.43.0

[PATCH AUTOSEL 6.1 5/5] dmaengine: fsl-qdma: increase size of 'irq_name'

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 6386f6c995b3ab91c72cfb76e4465553c555a8da ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'

drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                              ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                   ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-qdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
index 045ead46ec8f..39e2c4d52d8b 100644
--- a/drivers/dma/fsl-qdma.c
+++ b/drivers/dma/fsl-qdma.c
@@ -805,7 +805,7 @@ fsl_qdma_irq_init(struct platform_device *pdev,
 	int i;
 	int cpu;
 	int ret;
-	char irq_name[20];
+	char irq_name[32];
 
 	fsl_qdma->error_irq =
 		platform_get_irq_byname(pdev, "qdma-error");
-- 
2.43.0