DMA Engine development
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Vinod Koul <vkoul@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	 Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>, Joy Zou <joy.zou@nxp.com>
Cc: dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 imx@lists.linux.dev, Frank Li <Frank.Li@nxp.com>,
	 Nicolin Chen <b42378@freescale.com>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	 Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH v4 1/5] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
Date: Fri, 29 Mar 2024 10:34:41 -0400	[thread overview]
Message-ID: <20240329-sdma_upstream-v4-1-daeb3067dea7@nxp.com> (raw)
In-Reply-To: <20240329-sdma_upstream-v4-0-daeb3067dea7@nxp.com>

From: Nicolin Chen <b42378@freescale.com>

Allocate memory from SoC internal SRAM to reduce DDR access and keep DDR in
lower power state (such as self-referesh) longer.

Check iram_pool before sdma_init() so that ccb/context could be allocated
from iram because DDR maybe in self-referesh in lower power audio case
while sdma still running.

Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/dma/imx-sdma.c | 46 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 9b42f5e96b1e0..4f1a9d1b152d6 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -24,6 +24,7 @@
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
+#include <linux/genalloc.h>
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
@@ -531,6 +532,7 @@ struct sdma_engine {
 	/* clock ratio for AHB:SDMA core. 1:1 is 1, 2:1 is 0*/
 	bool				clk_ratio;
 	bool                            fw_loaded;
+	struct gen_pool			*iram_pool;
 };
 
 static int sdma_config_write(struct dma_chan *chan,
@@ -1358,8 +1360,14 @@ static int sdma_request_channel0(struct sdma_engine *sdma)
 {
 	int ret = -EBUSY;
 
-	sdma->bd0 = dma_alloc_coherent(sdma->dev, PAGE_SIZE, &sdma->bd0_phys,
-				       GFP_NOWAIT);
+	if (sdma->iram_pool)
+		sdma->bd0 = gen_pool_dma_alloc(sdma->iram_pool,
+					sizeof(struct sdma_buffer_descriptor),
+					&sdma->bd0_phys);
+	else
+		sdma->bd0 = dma_alloc_coherent(sdma->dev,
+					sizeof(struct sdma_buffer_descriptor),
+					&sdma->bd0_phys, GFP_NOWAIT);
 	if (!sdma->bd0) {
 		ret = -ENOMEM;
 		goto out;
@@ -1379,10 +1387,14 @@ static int sdma_request_channel0(struct sdma_engine *sdma)
 static int sdma_alloc_bd(struct sdma_desc *desc)
 {
 	u32 bd_size = desc->num_bd * sizeof(struct sdma_buffer_descriptor);
+	struct sdma_engine *sdma = desc->sdmac->sdma;
 	int ret = 0;
 
-	desc->bd = dma_alloc_coherent(desc->sdmac->sdma->dev, bd_size,
-				      &desc->bd_phys, GFP_NOWAIT);
+	if (sdma->iram_pool)
+		desc->bd = gen_pool_dma_alloc(sdma->iram_pool, bd_size, &desc->bd_phys);
+	else
+		desc->bd = dma_alloc_coherent(sdma->dev, bd_size, &desc->bd_phys, GFP_NOWAIT);
+
 	if (!desc->bd) {
 		ret = -ENOMEM;
 		goto out;
@@ -1394,9 +1406,12 @@ static int sdma_alloc_bd(struct sdma_desc *desc)
 static void sdma_free_bd(struct sdma_desc *desc)
 {
 	u32 bd_size = desc->num_bd * sizeof(struct sdma_buffer_descriptor);
+	struct sdma_engine *sdma = desc->sdmac->sdma;
 
-	dma_free_coherent(desc->sdmac->sdma->dev, bd_size, desc->bd,
-			  desc->bd_phys);
+	if (sdma->iram_pool)
+		gen_pool_free(sdma->iram_pool, (unsigned long)desc->bd, bd_size);
+	else
+		dma_free_coherent(desc->sdmac->sdma->dev, bd_size, desc->bd, desc->bd_phys);
 }
 
 static void sdma_desc_free(struct virt_dma_desc *vd)
@@ -2068,6 +2083,7 @@ static int sdma_init(struct sdma_engine *sdma)
 {
 	int i, ret;
 	dma_addr_t ccb_phys;
+	int ccbsize;
 
 	ret = clk_enable(sdma->clk_ipg);
 	if (ret)
@@ -2083,10 +2099,14 @@ static int sdma_init(struct sdma_engine *sdma)
 	/* Be sure SDMA has not started yet */
 	writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
 
-	sdma->channel_control = dma_alloc_coherent(sdma->dev,
-			MAX_DMA_CHANNELS * sizeof(struct sdma_channel_control) +
-			sizeof(struct sdma_context_data),
-			&ccb_phys, GFP_KERNEL);
+	ccbsize = MAX_DMA_CHANNELS * (sizeof(struct sdma_channel_control)
+		  + sizeof(struct sdma_context_data));
+
+	if (sdma->iram_pool)
+		sdma->channel_control = gen_pool_dma_alloc(sdma->iram_pool, ccbsize, &ccb_phys);
+	else
+		sdma->channel_control = dma_alloc_coherent(sdma->dev, ccbsize, &ccb_phys,
+							   GFP_KERNEL);
 
 	if (!sdma->channel_control) {
 		ret = -ENOMEM;
@@ -2272,6 +2292,12 @@ static int sdma_probe(struct platform_device *pdev)
 			vchan_init(&sdmac->vc, &sdma->dma_device);
 	}
 
+	if (np) {
+		sdma->iram_pool = of_gen_pool_get(np, "iram", 0);
+		if (sdma->iram_pool)
+			dev_info(&pdev->dev, "alloc bd from iram.\n");
+	}
+
 	ret = sdma_init(sdma);
 	if (ret)
 		goto err_init;

-- 
2.34.1


  reply	other threads:[~2024-03-29 14:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-29 14:34 [PATCH v4 0/5] dmaengine: fsl-sdma: Some improvement for fsl-sdma Frank Li
2024-03-29 14:34 ` Frank Li [this message]
2024-03-29 14:34 ` [PATCH v4 2/5] dmaengine: imx-sdma: Support 24bit/3bytes for sg mode Frank Li
2024-03-29 14:34 ` [PATCH v4 3/5] dmaengine: imx-sdma: support dual fifo for DEV_TO_DEV Frank Li
2024-03-29 14:34 ` [PATCH v4 4/5] dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID Frank Li
2024-04-02 12:20   ` Rob Herring
2024-04-07  9:04   ` Krzysztof Kozlowski
2024-04-07 11:21   ` Vinod Koul
2024-03-29 14:34 ` [PATCH v4 5/5] dmaengine: imx-sdma: Add i2c dma support Frank Li
2024-04-07 11:20   ` Vinod Koul
2024-04-07 16:39 ` [PATCH v4 0/5] dmaengine: fsl-sdma: Some improvement for fsl-sdma Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240329-sdma_upstream-v4-1-daeb3067dea7@nxp.com \
    --to=frank.li@nxp.com \
    --cc=b42378@freescale.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=joy.zou@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox