Re: [PATCH RESEND 2/2] damengine: dw-edma: Add msi wartermark configuration

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Fri, Jul 05, 2024 at 06:57:35PM +0800, zheng.dongxiong wrote:
> HDMA trigger wartermark interrupt, When use the RIE flag.
> PCIe RC will trigger AER, If msi wartermark addr is not configuration.
> This patch fix it by add msi wartermark configuration
> 
> Signed-off-by: zheng.dongxiong <zheng.dongxiong@outlook.com>

HDMA driver is not at all using watermark interrupts. So we should be disabling
them altogether.

See: https://lore.kernel.org/dmaengine/1720187733-5380-3-git-send-email-quic_msarkar@quicinc.com/

- Mani

> ---
>  drivers/dma/dw-edma/dw-hdma-v0-core.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> index d77051d1e..c4d15a7a7 100644
> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> @@ -280,6 +280,9 @@ static void dw_hdma_v0_core_ch_config(struct dw_edma_chan *chan)
>  	/* MSI done addr - low, high */
>  	SET_CH_32(dw, chan->dir, chan->id, msi_stop.lsb, chan->msi.address_lo);
>  	SET_CH_32(dw, chan->dir, chan->id, msi_stop.msb, chan->msi.address_hi);
> +	/* MSI watermark addr - low, high */
> +	SET_CH_32(dw, chan->dir, chan->id, msi_watermark.lsb, chan->msi.address_lo);
> +	SET_CH_32(dw, chan->dir, chan->id, msi_watermark.msb, chan->msi.address_hi);
>  	/* MSI abort addr - low, high */
>  	SET_CH_32(dw, chan->dir, chan->id, msi_abort.lsb, chan->msi.address_lo);
>  	SET_CH_32(dw, chan->dir, chan->id, msi_abort.msb, chan->msi.address_hi);
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்