[PATCH v2 09/10] arm64: dts: allwinner: a523: Add SPDIF TX pin on PB and PI pins

[Chen-Yu Tsai <wens@kernel.org>]

The SPDIF TX (called OWA OUT in the datasheet) is available on three
pins. Of those, the PH pin is unlikely to be used since it conflicts
with the first Ethernet controller.

The Radxa Cubie A5E exposes SPDIF TX through the PI pin group on the
40-pin GPIO header.

The Orange Pi 4A exposes SPDIF TX through both the PB and PI pin
groups on the 40-pin GPIO header. The PB pin alternatively would be
used for I2S0 though.

Add pinmux settings for both options so potential users can directly
reference either one.

Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
---
Changes since v1:
- New patch; missing from v1 causing dts to not compile
---
 arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index cebd8e16e845..42dab01e3f56 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -200,6 +200,20 @@ rgmii1_pins: rgmii1-pins {
 				bias-disable;
 			};
 
+			/omit-if-no-ref/
+			spdif_out_pb_pin: spdif-pb-pin {
+				pins = "PB8";
+				function = "spdif";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			spdif_out_pi_pin: spdif-pi-pin {
+				pins = "PI10";
+				function = "spdif";
+				allwinner,pinmux = <2>;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				allwinner,pinmux = <2>;
-- 
2.47.3