[PATCH v2 05/10] arm64: dts: allwinner: a523: Add DMA controller device nodes

[Chen-Yu Tsai <wens@kernel.org>]

The A523 has two DMA controllers. Add device nodes for both. Also hook
up DMA for existing devices.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index a9e051a8bea3..8edbd3873199 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -241,6 +241,8 @@ uart0: serial@2500000 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -252,6 +254,8 @@ uart1: serial@2500400 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -263,6 +267,8 @@ uart2: serial@2500800 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -274,6 +280,8 @@ uart3: serial@2500c00 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -285,6 +293,8 @@ uart4: serial@2501000 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -296,6 +306,8 @@ uart5: serial@2501400 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART5>;
 			resets = <&ccu RST_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -307,6 +319,8 @@ uart6: serial@2501800 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART6>;
 			resets = <&ccu RST_BUS_UART6>;
+			dmas = <&dma 20>, <&dma 20>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -318,6 +332,8 @@ uart7: serial@2501c00 {
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART7>;
 			resets = <&ccu RST_BUS_UART7>;
+			dmas = <&dma 21>, <&dma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -329,6 +345,8 @@ i2c0: i2c@2502000 {
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
 			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -342,6 +360,8 @@ i2c1: i2c@2502400 {
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -355,6 +375,8 @@ i2c2: i2c@2502800 {
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -368,6 +390,8 @@ i2c3: i2c@2502c00 {
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
 			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -381,6 +405,8 @@ i2c4: i2c@2503000 {
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
 			resets = <&ccu RST_BUS_I2C4>;
+			dmas = <&dma 47>, <&dma 47>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -394,6 +420,8 @@ i2c5: i2c@2503400 {
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C5>;
 			resets = <&ccu RST_BUS_I2C5>;
+			dmas = <&dma 48>, <&dma 48>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -408,6 +436,19 @@ syscon: syscon@3000000 {
 			ranges;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun55i-a523-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <54>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun55i-a523-sid",
 				     "allwinner,sun50i-a64-sid";
@@ -729,6 +770,8 @@ r_i2c0: i2c@7081400 {
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			dmas = <&dma 49>, <&dma 49>;
+			dma-names = "rx", "tx";
 			resets = <&r_ccu RST_BUS_R_I2C0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_i2c_pins>;
@@ -775,6 +818,19 @@ mcu_ccu: clock-controller@7102000 {
 			#reset-cells = <1>;
 		};
 
+		mcu_dma: dma-controller@7121000 {
+			compatible = "allwinner,sun55i-a523-mcu-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x07121000 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_DMA>, <&mcu_ccu CLK_MCU_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <15>;
+			resets = <&mcu_ccu RST_BUS_MCU_DMA>;
+			#dma-cells = <1>;
+		};
+
 		npu: npu@7122000 {
 			compatible = "vivante,gc";
 			reg = <0x07122000 0x1000>;
-- 
2.47.3