From: Amelie Delaunay <amelie.delaunay@foss.st.com>
To: Vinod Koul <vkoul@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <dmaengine@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Amelie Delaunay <amelie.delaunay@foss.st.com>
Subject: [PATCH 4/4] dmaengine: stm32-dma3: introduce ddata2dev helper
Date: Mon, 3 Nov 2025 11:15:13 +0100 [thread overview]
Message-ID: <20251103-dma3_improv-v1-4-57f048bf2877@foss.st.com> (raw)
In-Reply-To: <20251103-dma3_improv-v1-0-57f048bf2877@foss.st.com>
ddata2dev helper returns the device pointer from struct dma_device stored
in stm32_dma3_ddata structure.
Device pointer from struct dma_device has been initialized with &pdev->dev,
so the ddata2dev helper returns &pdev->dev.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
drivers/dma/stm32/stm32-dma3.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c
index 29ea510fa539..9f49ef8e2972 100644
--- a/drivers/dma/stm32/stm32-dma3.c
+++ b/drivers/dma/stm32/stm32-dma3.c
@@ -333,6 +333,11 @@ static struct device *chan2dev(struct stm32_dma3_chan *chan)
return &chan->vchan.chan.dev->device;
}
+static struct device *ddata2dev(struct stm32_dma3_ddata *ddata)
+{
+ return ddata->dma_dev.dev;
+}
+
static void stm32_dma3_chan_dump_reg(struct stm32_dma3_chan *chan)
{
struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);
@@ -392,6 +397,7 @@ static void stm32_dma3_chan_dump_hwdesc(struct stm32_dma3_chan *chan,
} else {
dev_dbg(chan2dev(chan), "X\n");
}
+
}
static struct stm32_dma3_swdesc *stm32_dma3_chan_desc_alloc(struct stm32_dma3_chan *chan, u32 count)
@@ -1110,7 +1116,7 @@ static int stm32_dma3_alloc_chan_resources(struct dma_chan *c)
struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);
int ret;
- ret = pm_runtime_resume_and_get(ddata->dma_dev.dev);
+ ret = pm_runtime_resume_and_get(ddata2dev(ddata));
if (ret < 0)
return ret;
@@ -1144,7 +1150,7 @@ static int stm32_dma3_alloc_chan_resources(struct dma_chan *c)
chan->lli_pool = NULL;
err_put_sync:
- pm_runtime_put_sync(ddata->dma_dev.dev);
+ pm_runtime_put_sync(ddata2dev(ddata));
return ret;
}
@@ -1170,7 +1176,7 @@ static void stm32_dma3_free_chan_resources(struct dma_chan *c)
if (chan->semaphore_mode)
stm32_dma3_put_chan_sem(chan);
- pm_runtime_put_sync(ddata->dma_dev.dev);
+ pm_runtime_put_sync(ddata2dev(ddata));
/* Reset configuration */
memset(&chan->dt_config, 0, sizeof(chan->dt_config));
@@ -1610,11 +1616,11 @@ static bool stm32_dma3_filter_fn(struct dma_chan *c, void *fn_param)
if (!(mask & BIT(chan->id)))
return false;
- ret = pm_runtime_resume_and_get(ddata->dma_dev.dev);
+ ret = pm_runtime_resume_and_get(ddata2dev(ddata));
if (ret < 0)
return false;
semcr = readl_relaxed(ddata->base + STM32_DMA3_CSEMCR(chan->id));
- pm_runtime_put_sync(ddata->dma_dev.dev);
+ pm_runtime_put_sync(ddata2dev(ddata));
/* Check if chan is free */
if (semcr & CSEMCR_SEM_MUTEX)
@@ -1636,7 +1642,7 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st
struct dma_chan *c;
if (dma_spec->args_count < 3) {
- dev_err(ddata->dma_dev.dev, "Invalid args count\n");
+ dev_err(ddata2dev(ddata), "Invalid args count\n");
return NULL;
}
@@ -1645,14 +1651,14 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st
conf.tr_conf = dma_spec->args[2];
if (conf.req_line >= ddata->dma_requests) {
- dev_err(ddata->dma_dev.dev, "Invalid request line\n");
+ dev_err(ddata2dev(ddata), "Invalid request line\n");
return NULL;
}
/* Request dma channel among the generic dma controller list */
c = dma_request_channel(mask, stm32_dma3_filter_fn, &conf);
if (!c) {
- dev_err(ddata->dma_dev.dev, "No suitable channel found\n");
+ dev_err(ddata2dev(ddata), "No suitable channel found\n");
return NULL;
}
@@ -1665,6 +1671,7 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st
static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata)
{
+ struct device *dev = ddata2dev(ddata);
u32 chan_reserved, mask = 0, i, ccidcfgr, invalid_cid = 0;
/* Reserve Secure channels */
@@ -1676,7 +1683,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata)
* In case CID filtering is not configured, dma-channel-mask property can be used to
* specify available DMA channels to the kernel.
*/
- of_property_read_u32(ddata->dma_dev.dev->of_node, "dma-channel-mask", &mask);
+ of_property_read_u32(dev->of_node, "dma-channel-mask", &mask);
/* Reserve !CID-filtered not in dma-channel-mask, static CID != CID1, CID1 not allowed */
for (i = 0; i < ddata->dma_channels; i++) {
@@ -1696,7 +1703,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata)
ddata->chans[i].semaphore_mode = true;
}
}
- dev_dbg(ddata->dma_dev.dev, "chan%d: %s mode, %s\n", i,
+ dev_dbg(dev, "chan%d: %s mode, %s\n", i,
!(ccidcfgr & CCIDCFGR_CFEN) ? "!CID-filtered" :
ddata->chans[i].semaphore_mode ? "Semaphore" : "Static CID",
(chan_reserved & BIT(i)) ? "denied" :
@@ -1704,7 +1711,7 @@ static u32 stm32_dma3_check_rif(struct stm32_dma3_ddata *ddata)
}
if (invalid_cid)
- dev_warn(ddata->dma_dev.dev, "chan%*pbl have invalid CID configuration\n",
+ dev_warn(dev, "chan%*pbl have invalid CID configuration\n",
ddata->dma_channels, &invalid_cid);
return chan_reserved;
--
2.43.0
prev parent reply other threads:[~2025-11-03 10:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 10:15 [PATCH 0/4] dmaengine: stm32-dma3: improvements and helper functions Amelie Delaunay
2025-11-03 10:15 ` [PATCH 1/4] dmaengine: stm32-dma3: use module_platform_driver Amelie Delaunay
2025-11-03 10:15 ` [PATCH 2/4] dmaengine: stm32-dma3: introduce channel semaphore helpers Amelie Delaunay
2025-11-03 10:15 ` [PATCH 3/4] dmaengine: stm32-dma3: restore channel semaphore status after suspend Amelie Delaunay
2025-11-03 10:15 ` Amelie Delaunay [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103-dma3_improv-v1-4-57f048bf2877@foss.st.com \
--to=amelie.delaunay@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).