[PATCH RESEND v10 0/2] Add AMD MDB Endpoint and non-LL mode Support

[Devendra K Verma <devendra.verma@amd.com>]

This series of patch support the following:

 - AMD MDB Endpoint Support, as part of this patch following are
   added:
   o AMD supported device ID and vendor ID (Xilinx)
   o AMD MDB specific driver data
   o AMD specific VSEC capabilities to retrieve the base of
     phys address of MDB side DDR
   o Logic to assign the offsets to LL and data blocks if
     more number of channels are enabled than configured
     in the given pci_data struct.

 - Addition of non-LL mode
   o The IP supported non-LL mode functions
   o Flexibility to choose non-LL mode via dma_slave_config
     param peripheral_config, by the client for all the vendors
     using HDMA IP.
   o Allow IP utilization if LL mode is not available

Devendra K Verma (2):
  dmaengine: dw-edma: Add AMD MDB Endpoint Support
  dmaengine: dw-edma: Add non-LL mode

 drivers/dma/dw-edma/dw-edma-core.c    |  35 +++-
 drivers/dma/dw-edma/dw-edma-core.h    |   1 +
 drivers/dma/dw-edma/dw-edma-pcie.c    | 220 +++++++++++++++++++++++---
 drivers/dma/dw-edma/dw-hdma-v0-core.c |  65 +++++++-
 drivers/dma/dw-edma/dw-hdma-v0-regs.h |   1 +
 include/linux/dma/edma.h              |   1 +
 6 files changed, 301 insertions(+), 22 deletions(-)

-- 
2.43.0