[PATCh v3 0/2] Add DMA ACK signal routing for RZ/V2H family

[John Madieu <john.madieu.xa@bp.renesas.com>]

Some peripherals on RZ/V2H, RZ/V2N, and RZ/G3E SoCs require explicit
DMA ACK signal routing through the ICU for level-based DMA handshaking.

Rather than encoding the ACK signal number as a second DMA specifier
cell, derive it in-driver from the MID/RID request number using
arithmetic formulas based on ICU Table 4.6-28 (3 linear peripheral
groups). It must also be noted that DMA ack register is located in
the ICU block


This series adds:
  - ICU driver extension to register/deregister DMA ACK signals
    (DMA ACK register is located in the ICU block)
  - rz-dmac driver support for ACK signal routing via MID/RID lookup,
    including restore on system resume

Note: patch 2/2 depends upon [1], the Cyclic DMA series from Claudiu.

Changes:

v3:
 - Splitout from v2 [2] into DMA-specific series 
 - No code change

v2:
 - Drop DMA ACK second cell from DT specifier
 - Derive ACK signal number in-driver from MID/RID using arithmetic
   formulas per ICU Table 4.6-28 (3 linear peripheral groups)

[1] https://lore.kernel.org/all/20260320112838.2200198-1-claudiu.beznea.uj@bp.renesas.com/
[2] https://lore.kernel.org/all/20260402090524.9137-1-john.madieu.xa@bp.renesas.com/

John Madieu (2):
  irqchip/renesas-rzv2h: Add DMA ACK signal routing support
  dma: sh: rz-dmac: Add DMA ACK signal routing support

 drivers/dma/sh/rz-dmac.c                  | 72 +++++++++++++++++++++++
 drivers/irqchip/irq-renesas-rzv2h.c       | 40 +++++++++++++
 include/linux/irqchip/irq-renesas-rzv2h.h |  5 ++
 3 files changed, 117 insertions(+)

-- 
2.25.1