From: Nathan Lynch via B4 Relay <devnull+nathan.lynch.amd.com@kernel.org>
To: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
David Rientjes <rientjes@google.com>,
John.Kariuki@amd.com, Kinsey Ho <kinseyho@google.com>,
Mario Limonciello <mario.limonciello@amd.com>,
PradeepVineshReddy.Kodamati@amd.com,
Shivank Garg <shivankg@amd.com>,
Stephen Bates <Stephen.Bates@amd.com>,
Wei Huang <wei.huang2@amd.com>, Wei Xu <weixugc@google.com>,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>,
Frank Li <Frank.Li@nxp.com>, Nathan Lynch <nathan.lynch@amd.com>
Subject: [PATCH v2 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers
Date: Mon, 11 May 2026 14:16:28 -0500 [thread overview]
Message-ID: <20260511-sdxi-base-v2-16-889cfed17e3f@amd.com> (raw)
In-Reply-To: <20260511-sdxi-base-v2-0-889cfed17e3f@amd.com>
From: Nathan Lynch <nathan.lynch@amd.com>
Introduce small helper functions for manipulating certain common
properties of descriptors after their operation-specific encoding has
been performed but before they are submitted.
sdxi_desc_set_csb() associates an optional completion status block
with a descriptor.
sdxi_desc_set_fence() forces retirement of any prior descriptors in
the ring before the target descriptor is executed. This is useful for
interrupt descriptors that signal the completion of an operation.
sdxi_desc_set_sequential() ensures that all writes from prior
descriptor operations in the same context are made globally visible
prior to making writes from the target descriptor globally visible.
sdxi_desc_make_valid() sets the descriptor validity bit, transferring
ownership of the descriptor from software to the SDXI
implementation. (The implementation is allowed to execute the
descriptor at this point, but the caller is still obligated to push
the doorbell to ensure execution occurs.)
Each of the preceding functions will warn if invoked on a descriptor
that has already been released to the SDXI implementation (i.e. had
its validity bit set).
Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
---
drivers/dma/sdxi/descriptor.h | 64 +++++++++++++++++++++++++++++++++++++++++++
drivers/dma/sdxi/hw.h | 9 ++++++
2 files changed, 73 insertions(+)
diff --git a/drivers/dma/sdxi/descriptor.h b/drivers/dma/sdxi/descriptor.h
new file mode 100644
index 000000000000..c0f01b1be726
--- /dev/null
+++ b/drivers/dma/sdxi/descriptor.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef DMA_SDXI_DESCRIPTOR_H
+#define DMA_SDXI_DESCRIPTOR_H
+
+/*
+ * Facilities for encoding SDXI descriptors.
+ *
+ * Copyright Advanced Micro Devices, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/ratelimit.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include "hw.h"
+
+static inline void sdxi_desc_vl_expect(const struct sdxi_desc *desc, bool expected)
+{
+ u8 vl = FIELD_GET(SDXI_DSC_VL, le32_to_cpu(desc->opcode));
+
+ WARN_RATELIMIT(vl != expected, "expected vl=%u but got %u\n", expected, vl);
+}
+
+static inline void sdxi_desc_set_csb(struct sdxi_desc *desc, dma_addr_t addr)
+{
+ sdxi_desc_vl_expect(desc, 0);
+ desc->csb_ptr = cpu_to_le64(FIELD_PREP(SDXI_DSC_CSB_PTR, addr >> 5));
+}
+
+static inline void sdxi_desc_make_valid(struct sdxi_desc *desc)
+{
+ u32 opcode = le32_to_cpu(desc->opcode);
+
+ sdxi_desc_vl_expect(desc, 0);
+ FIELD_MODIFY(SDXI_DSC_VL, &opcode, 1);
+ /*
+ * Once vl is set, no more modifications to the descriptor
+ * payload are allowed. Ensure the vl update is ordered after
+ * all other initialization of the descriptor.
+ */
+ dma_wmb();
+ WRITE_ONCE(desc->opcode, cpu_to_le32(opcode));
+}
+
+static inline void sdxi_desc_set_fence(struct sdxi_desc *desc)
+{
+ u32 opcode = le32_to_cpu(desc->opcode);
+
+ sdxi_desc_vl_expect(desc, 0);
+ FIELD_MODIFY(SDXI_DSC_FE, &opcode, 1);
+ desc->opcode = cpu_to_le32(opcode);
+}
+
+static inline void sdxi_desc_set_sequential(struct sdxi_desc *desc)
+{
+ u32 opcode = le32_to_cpu(desc->opcode);
+
+ sdxi_desc_vl_expect(desc, 0);
+ FIELD_MODIFY(SDXI_DSC_SE, &opcode, 1);
+ desc->opcode = cpu_to_le32(opcode);
+}
+
+#endif /* DMA_SDXI_DESCRIPTOR_H */
diff --git a/drivers/dma/sdxi/hw.h b/drivers/dma/sdxi/hw.h
index 46424376f26f..cb1bed2f83f2 100644
--- a/drivers/dma/sdxi/hw.h
+++ b/drivers/dma/sdxi/hw.h
@@ -140,6 +140,15 @@ struct sdxi_desc {
__u8 operation[52];
__le64 csb_ptr;
);
+
+/* For opcode field */
+#define SDXI_DSC_VL BIT(0)
+#define SDXI_DSC_SE BIT(1)
+#define SDXI_DSC_FE BIT(2)
+
+/* For csb_ptr field */
+#define SDXI_DSC_CSB_PTR GENMASK_ULL(63, 5)
+
};
} __packed;
static_assert(sizeof(struct sdxi_desc) == 64);
--
2.54.0
next prev parent reply other threads:[~2026-05-11 19:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 19:16 [PATCH v2 00/23] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 01/23] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2026-05-11 20:48 ` Frank Li
2026-05-11 19:16 ` [PATCH v2 02/23] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 03/23] dmaengine: sdxi: Add PCI initialization Nathan Lynch via B4 Relay
2026-05-11 21:22 ` Frank Li
2026-05-11 19:16 ` [PATCH v2 04/23] dmaengine: sdxi: Feature discovery and initial configuration Nathan Lynch via B4 Relay
2026-05-11 21:30 ` Frank Li
2026-05-11 19:16 ` [PATCH v2 05/23] dmaengine: sdxi: Configure context tables Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 06/23] dmaengine: sdxi: Allocate DMA pools Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 07/23] dmaengine: sdxi: Allocate administrative context Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 08/23] dmaengine: sdxi: Install " Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 09/23] dmaengine: sdxi: Start functions on probe, stop on remove Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 10/23] dmaengine: sdxi: Complete administrative context jump start Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 11/23] dmaengine: sdxi: Add client context alloc and release APIs Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 12/23] dmaengine: sdxi: Add descriptor ring management Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 13/23] dmaengine: sdxi: Add unit tests for descriptor ring reservations Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 14/23] dmaengine: sdxi: Attach descriptor ring state to contexts Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 15/23] dmaengine: sdxi: Per-context access key (AKey) table entry allocator Nathan Lynch via B4 Relay
2026-05-11 19:16 ` Nathan Lynch via B4 Relay [this message]
2026-05-11 19:16 ` [PATCH v2 17/23] dmaengine: sdxi: Add completion status block API Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 18/23] dmaengine: sdxi: Encode context start, stop, and sync descriptors Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 19/23] dmaengine: sdxi: Provide context start and stop APIs Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 21/23] dmaengine: sdxi: Add unit tests for descriptor encoding Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 22/23] dmaengine: sdxi: MSI/MSI-X vector allocation and mapping Nathan Lynch via B4 Relay
2026-05-11 19:16 ` [PATCH v2 23/23] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
2026-05-11 20:47 ` Frank Li
2026-05-11 22:28 ` Lynch, Nathan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260511-sdxi-base-v2-16-889cfed17e3f@amd.com \
--to=devnull+nathan.lynch.amd.com@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=John.Kariuki@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Stephen.Bates@amd.com \
--cc=bhelgaas@google.com \
--cc=dmaengine@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kinseyho@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=nathan.lynch@amd.com \
--cc=rientjes@google.com \
--cc=shivankg@amd.com \
--cc=vkoul@kernel.org \
--cc=wei.huang2@amd.com \
--cc=weixugc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox