DMA Engine development
 help / color / mirror / Atom feed
From: Sheetal <sheetal@nvidia.com>
To: Vinod Koul <vkoul@kernel.org>, Laxman Dewangan <ldewangan@nvidia.com>
Cc: Jon Hunter <jonathanh@nvidia.com>, Frank Li <Frank.Li@kernel.org>,
	"Thierry Reding" <thierry.reding@kernel.org>,
	Sameer Pujar <spujar@nvidia.com>,
	"Mohan Kumar" <mkumard@nvidia.com>, <dmaengine@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Sheetal <sheetal@nvidia.com>
Subject: [PATCH v6] dmaengine: tegra210-adma: Add error logging on failure paths
Date: Tue, 12 May 2026 09:25:08 +0000	[thread overview]
Message-ID: <20260512092508.1406119-1-sheetal@nvidia.com> (raw)

Add dev_err/dev_err_probe logging across failure paths to improve
debuggability of DMA errors during runtime and probe.

Use return dev_err_probe() pattern consistently in the probe function,
and dev_err in non-probe functions. Also convert existing dev_err calls
in probe to dev_err_probe for consistency.

As part of the probe-path cleanup, use dmaenginem_async_device_register()
and devm_pm_runtime_enable(), and add tegra_adma_irq_dispose() for managed
IRQ mapping cleanup. These managed helpers remove the probe error unwind
labels while keeping the remove path minimal.

Signed-off-by: Sheetal <sheetal@nvidia.com>
---
Changes in v6:
- Document managed DMA registration, runtime PM enablement, and IRQ cleanup
  in the commit message.

 drivers/dma/tegra210-adma.c | 123 ++++++++++++++++++++++++--------------------
 1 file changed, 68 insertions(+), 55 deletions(-)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 14e0c408ed1e..6987bf6ec648 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -335,8 +335,16 @@ static int tegra_adma_request_alloc(struct tegra_adma_chan *tdc,
 	struct tegra_adma *tdma = tdc->tdma;
 	unsigned int sreq_index = tdc->sreq_index;
 
-	if (tdc->sreq_reserved)
-		return tdc->sreq_dir == direction ? 0 : -EINVAL;
+	if (tdc->sreq_reserved) {
+		if (tdc->sreq_dir != direction) {
+			dev_err(tdma->dev,
+				"DMA request direction mismatch: reserved=%s, requested=%s\n",
+				dmaengine_get_direction_text(tdc->sreq_dir),
+				dmaengine_get_direction_text(direction));
+			return -EINVAL;
+		}
+		return 0;
+	}
 
 	if (sreq_index > tdma->cdata->ch_req_max) {
 		dev_err(tdma->dev, "invalid DMA request\n");
@@ -665,8 +673,11 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
 	const struct tegra_adma_chip_data *cdata = tdc->tdma->cdata;
 	unsigned int burst_size, adma_dir, fifo_size_shift;
 
-	if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS)
+	if (desc->num_periods > ADMA_CH_CONFIG_MAX_BUFS) {
+		dev_err(tdc2dev(tdc), "invalid DMA periods %zu (max %u)\n",
+			desc->num_periods, ADMA_CH_CONFIG_MAX_BUFS);
 		return -EINVAL;
+	}
 
 	switch (direction) {
 	case DMA_MEM_TO_DEV:
@@ -1020,6 +1031,17 @@ static const struct of_device_id tegra_adma_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra_adma_of_match);
 
+static void tegra_adma_irq_dispose(void *data)
+{
+	struct tegra_adma *tdma = data;
+	int i;
+
+	for (i = 0; i < tdma->nr_channels; ++i) {
+		if (tdma->channels[i].irq > 0)
+			irq_dispose_mapping(tdma->channels[i].irq);
+	}
+}
+
 static int tegra_adma_probe(struct platform_device *pdev)
 {
 	const struct tegra_adma_chip_data *cdata;
@@ -1029,8 +1051,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 	cdata = of_device_get_match_data(&pdev->dev);
 	if (!cdata) {
-		dev_err(&pdev->dev, "device match data not found\n");
-		return -ENODEV;
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "device match data not found\n");
 	}
 
 	tdma = devm_kzalloc(&pdev->dev,
@@ -1056,7 +1078,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
 			unsigned int ch_base_offset;
 
 			if (res_page->start < res_base->start)
-				return -EINVAL;
+				return dev_err_probe(&pdev->dev, -EINVAL,
+						     "invalid page/global resource order\n");
 			page_offset = res_page->start - res_base->start;
 			ch_base_offset = cdata->ch_base_offset;
 			if (!ch_base_offset)
@@ -1064,7 +1087,9 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 			page_no = div_u64(page_offset, ch_base_offset);
 			if (!page_no || page_no > INT_MAX)
-				return -EINVAL;
+				return dev_err_probe(&pdev->dev, -EINVAL,
+						     "invalid page number %llu\n",
+						     (unsigned long long)page_no);
 
 			tdma->ch_page_no = page_no - 1;
 			tdma->base_addr = devm_ioremap_resource(&pdev->dev, res_base);
@@ -1079,7 +1104,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
 			if (IS_ERR(tdma->base_addr))
 				return PTR_ERR(tdma->base_addr);
 		} else {
-			return -ENODEV;
+			return dev_err_probe(&pdev->dev, -ENODEV,
+					     "failed to get memory resource\n");
 		}
 
 		tdma->ch_base_addr = tdma->base_addr + cdata->ch_base_offset;
@@ -1087,8 +1113,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 	tdma->ahub_clk = devm_clk_get(&pdev->dev, "d_audio");
 	if (IS_ERR(tdma->ahub_clk)) {
-		dev_err(&pdev->dev, "Error: Missing ahub controller clock\n");
-		return PTR_ERR(tdma->ahub_clk);
+		return dev_err_probe(&pdev->dev, PTR_ERR(tdma->ahub_clk),
+				     "failed to get ahub clock\n");
 	}
 
 	tdma->dma_chan_mask = devm_kzalloc(&pdev->dev,
@@ -1104,11 +1130,18 @@ static int tegra_adma_probe(struct platform_device *pdev)
 					 (u32 *)tdma->dma_chan_mask,
 					 BITS_TO_U32(tdma->nr_channels));
 	if (ret < 0 && (ret != -EINVAL)) {
-		dev_err(&pdev->dev, "dma-channel-mask is not complete.\n");
-		return ret;
+		return dev_err_probe(&pdev->dev, ret,
+				     "dma-channel-mask is not complete.\n");
 	}
 
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
+
+	ret = devm_add_action_or_reset(&pdev->dev, tegra_adma_irq_dispose,
+				       tdma);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to add IRQ cleanup action\n");
+
 	for (i = 0; i < tdma->nr_channels; i++) {
 		struct tegra_adma_chan *tdc = &tdma->channels[i];
 
@@ -1127,26 +1160,33 @@ static int tegra_adma_probe(struct platform_device *pdev)
 					cdata->global_ch_config_base + (4 * i);
 		}
 
-		tdc->irq = of_irq_get(pdev->dev.of_node, i);
-		if (tdc->irq <= 0) {
-			ret = tdc->irq ?: -ENXIO;
-			goto irq_dispose;
-		}
+		ret = of_irq_get(pdev->dev.of_node, i);
+		if (ret <= 0)
+			return dev_err_probe(&pdev->dev, ret ?: -ENXIO,
+					     "failed to get IRQ for channel %d\n", i);
+		tdc->irq = ret;
 
 		vchan_init(&tdc->vc, &tdma->dma_dev);
 		tdc->vc.desc_free = tegra_adma_desc_free;
 		tdc->tdma = tdma;
 	}
 
-	pm_runtime_enable(&pdev->dev);
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to enable runtime PM\n");
+
+	ACQUIRE(pm_runtime_active_try_enabled, pm)(&pdev->dev);
 
-	ret = pm_runtime_resume_and_get(&pdev->dev);
+	ret = ACQUIRE_ERR(pm_runtime_active_try_enabled, &pm);
 	if (ret < 0)
-		goto rpm_disable;
+		return dev_err_probe(&pdev->dev, ret,
+				     "runtime PM resume failed\n");
 
 	ret = tegra_adma_init(tdma);
 	if (ret)
-		goto rpm_put;
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to initialize ADMA\n");
 
 	dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
@@ -1170,53 +1210,26 @@ static int tegra_adma_probe(struct platform_device *pdev)
 	tdma->dma_dev.device_pause = tegra_adma_pause;
 	tdma->dma_dev.device_resume = tegra_adma_resume;
 
-	ret = dma_async_device_register(&tdma->dma_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "ADMA registration failed: %d\n", ret);
-		goto rpm_put;
-	}
+	ret = dmaenginem_async_device_register(&tdma->dma_dev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "ADMA registration failed\n");
 
 	ret = of_dma_controller_register(pdev->dev.of_node,
 					 tegra_dma_of_xlate, tdma);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "ADMA OF registration failed %d\n", ret);
-		goto dma_remove;
-	}
-
-	pm_runtime_put(&pdev->dev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "ADMA OF registration failed\n");
 
 	dev_info(&pdev->dev, "Tegra210 ADMA driver registered %d channels\n",
 		 tdma->nr_channels);
 
 	return 0;
-
-dma_remove:
-	dma_async_device_unregister(&tdma->dma_dev);
-rpm_put:
-	pm_runtime_put_sync(&pdev->dev);
-rpm_disable:
-	pm_runtime_disable(&pdev->dev);
-irq_dispose:
-	while (--i >= 0)
-		irq_dispose_mapping(tdma->channels[i].irq);
-
-	return ret;
 }
 
 static void tegra_adma_remove(struct platform_device *pdev)
 {
-	struct tegra_adma *tdma = platform_get_drvdata(pdev);
-	int i;
-
 	of_dma_controller_free(pdev->dev.of_node);
-	dma_async_device_unregister(&tdma->dma_dev);
-
-	for (i = 0; i < tdma->nr_channels; ++i) {
-		if (tdma->channels[i].irq)
-			irq_dispose_mapping(tdma->channels[i].irq);
-	}
-
-	pm_runtime_disable(&pdev->dev);
 }
 
 static const struct dev_pm_ops tegra_adma_dev_pm_ops = {
-- 
2.17.1

                 reply	other threads:[~2026-05-12  9:25 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260512092508.1406119-1-sheetal@nvidia.com \
    --to=sheetal@nvidia.com \
    --cc=Frank.Li@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mkumard@nvidia.com \
    --cc=spujar@nvidia.com \
    --cc=thierry.reding@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox