DMA Engine development
 help / color / mirror / Atom feed
From: Nathan Lynch via B4 Relay <devnull+nathan.lynch.amd.com@kernel.org>
To: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	 David Rientjes <rientjes@google.com>,
	John.Kariuki@amd.com,  Jonathan Cameron <jic23@kernel.org>,
	Kinsey Ho <kinseyho@google.com>,
	 Mario Limonciello <mario.limonciello@amd.com>,
	 PradeepVineshReddy.Kodamati@amd.com,
	Shivank Garg <shivankg@amd.com>,
	 Stephen Bates <Stephen.Bates@amd.com>,
	Tycho Andersen <tycho@kernel.org>,
	 Wei Huang <wei.huang2@amd.com>, Wei Xu <weixugc@google.com>,
	 dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-pci@vger.kernel.org, Nathan Lynch <nathan.lynch@amd.com>
Subject: [PATCH v3 09/23] dmaengine: sdxi: Start functions on probe, stop on remove
Date: Fri, 05 Jun 2026 19:02:12 -0500	[thread overview]
Message-ID: <20260605-sdxi-base-v3-9-4d38ca2bdffe@amd.com> (raw)
In-Reply-To: <20260605-sdxi-base-v3-0-4d38ca2bdffe@amd.com>

From: Nathan Lynch <nathan.lynch@amd.com>

Following admin context setup in the previous patch, drive each SDXI
function to active state during probe. This is done by writing
GSRV_ACTIVE to MMIO_CTL0.fn_gsr and polling MMIO_STS0.fn_gsv until the
function reaches GSV_ACTIVE or an error state. A 1-second timeout has
been sufficient in practice so far.

Introduce sdxi_unregister() to stop the function during remove and wire
it up via the pci_driver .remove callback.

Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
---
 drivers/dma/sdxi/device.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/dma/sdxi/pci.c    |  7 +++++++
 drivers/dma/sdxi/sdxi.h   |  1 +
 3 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sdxi/device.c b/drivers/dma/sdxi/device.c
index 4d595e79b8ce..e8f087f758fd 100644
--- a/drivers/dma/sdxi/device.c
+++ b/drivers/dma/sdxi/device.c
@@ -90,6 +90,42 @@ static void sdxi_write_fn_gsr(struct sdxi_dev *sdxi, enum sdxi_fn_gsr cmd)
 	sdxi_write64(sdxi, SDXI_MMIO_CTL0, ctl0);
 }
 
+/*
+ * Transition the function from stopped state to active.
+ * See SDXI 1.0 4.1 SDXI Function State.
+ */
+static int sdxi_dev_start(struct sdxi_dev *sdxi)
+{
+	enum sdxi_fn_gsv status = sdxi_dev_gsv(sdxi);
+	int ret;
+
+	if (status != SDXI_GSV_STOP) {
+		dev_err(sdxi->dev,
+			"can't activate busy device (unexpected gsv: %s)\n",
+			gsv_str(status));
+		return -EBUSY;
+	}
+
+	sdxi_write_fn_gsr(sdxi, SDXI_GSRV_ACTIVE);
+
+	ret = sdxi_dev_gsv_poll(sdxi, status,
+				status == SDXI_GSV_ACTIVE ||
+				status == SDXI_GSV_ERROR);
+	if (ret) {
+		dev_err(sdxi->dev, "activation timed out, current state: %s\n",
+			gsv_str(status));
+		return ret;
+	}
+
+	if (status == SDXI_GSV_ERROR) {
+		dev_err(sdxi->dev, "went to error state during activation\n");
+		return -EIO;
+	}
+
+	dev_dbg(sdxi->dev, "activated\n");
+	return 0;
+}
+
 /* Get the device to the GSV_STOP state. */
 static int sdxi_dev_stop(struct sdxi_dev *sdxi)
 {
@@ -229,7 +265,11 @@ static int sdxi_fn_activate(struct sdxi_dev *sdxi)
 	if (err)
 		return err;
 
-	return 0;
+	/*
+	 * SDXI 1.0 4.1.8.9: Set MMIO_CTL0.fn_gsr to GSRV_ACTIVE and
+	 * wait for MMIO_STS0.fn_gsv to reach GSV_ACTIVE or GSV_ERROR.
+	 */
+	return sdxi_dev_start(sdxi);
 }
 
 static int sdxi_device_init(struct sdxi_dev *sdxi)
@@ -290,6 +330,14 @@ int sdxi_register(struct device *dev, const struct sdxi_bus_ops *ops)
 }
 EXPORT_SYMBOL_NS_GPL(sdxi_register, "SDXI");
 
+void sdxi_unregister(struct device *dev)
+{
+	struct sdxi_dev *sdxi = dev_get_drvdata(dev);
+
+	sdxi_dev_stop(sdxi);
+}
+EXPORT_SYMBOL_NS_GPL(sdxi_unregister, "SDXI");
+
 MODULE_AUTHOR("Wei Huang");
 MODULE_AUTHOR("Nathan Lynch");
 MODULE_DESCRIPTION("SDXI core");
diff --git a/drivers/dma/sdxi/pci.c b/drivers/dma/sdxi/pci.c
index 42e8af008b10..4d7d6812da6d 100644
--- a/drivers/dma/sdxi/pci.c
+++ b/drivers/dma/sdxi/pci.c
@@ -63,6 +63,12 @@ static int sdxi_pci_probe(struct pci_dev *pdev,
 	return sdxi_register(&pdev->dev, &sdxi_pci_ops);
 }
 
+static void sdxi_pci_remove(struct pci_dev *pdev)
+{
+	pci_disable_sriov(pdev);
+	sdxi_unregister(&pdev->dev);
+}
+
 static const struct pci_device_id sdxi_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_ACCELERATOR_SDXI, 0xffffff) },
 	{ }
@@ -73,6 +79,7 @@ static struct pci_driver sdxi_driver = {
 	.name = "sdxi",
 	.id_table = sdxi_id_table,
 	.probe = sdxi_pci_probe,
+	.remove = sdxi_pci_remove,
 	.sriov_configure = pci_sriov_configure_simple,
 };
 
diff --git a/drivers/dma/sdxi/sdxi.h b/drivers/dma/sdxi/sdxi.h
index 903bf18bd3cc..a15b97135308 100644
--- a/drivers/dma/sdxi/sdxi.h
+++ b/drivers/dma/sdxi/sdxi.h
@@ -64,6 +64,7 @@ struct sdxi_dev {
 };
 
 int sdxi_register(struct device *dev, const struct sdxi_bus_ops *ops);
+void sdxi_unregister(struct device *dev);
 
 static inline u64 sdxi_read64(const struct sdxi_dev *sdxi, enum sdxi_reg reg)
 {

-- 
2.54.0



  parent reply	other threads:[~2026-06-06  0:02 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-06  0:02 [PATCH v3 00/23] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 01/23] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 02/23] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 03/23] dmaengine: sdxi: Add PCI initialization Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 04/23] dmaengine: sdxi: Feature discovery and initial configuration Nathan Lynch via B4 Relay
2026-06-06  0:14   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 05/23] dmaengine: sdxi: Configure context tables Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 06/23] dmaengine: sdxi: Allocate DMA pools Nathan Lynch via B4 Relay
2026-06-06  0:15   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 07/23] dmaengine: sdxi: Allocate administrative context Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 08/23] dmaengine: sdxi: Install " Nathan Lynch via B4 Relay
2026-06-06  0:26   ` sashiko-bot
2026-06-06  0:02 ` Nathan Lynch via B4 Relay [this message]
2026-06-06  0:14   ` [PATCH v3 09/23] dmaengine: sdxi: Start functions on probe, stop on remove sashiko-bot
2026-06-06  0:02 ` [PATCH v3 10/23] dmaengine: sdxi: Complete administrative context jump start Nathan Lynch via B4 Relay
2026-06-06  0:12   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 11/23] dmaengine: sdxi: Add client context alloc and release APIs Nathan Lynch via B4 Relay
2026-06-06  0:22   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 12/23] dmaengine: sdxi: Add descriptor ring management Nathan Lynch via B4 Relay
2026-06-06  0:19   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 13/23] dmaengine: sdxi: Add unit tests for descriptor ring reservations Nathan Lynch via B4 Relay
2026-06-06  0:16   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 14/23] dmaengine: sdxi: Attach descriptor ring state to contexts Nathan Lynch via B4 Relay
2026-06-06  0:24   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 15/23] dmaengine: sdxi: Per-context access key (AKey) table entry allocator Nathan Lynch via B4 Relay
2026-06-06  0:20   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 17/23] dmaengine: sdxi: Add completion status block API Nathan Lynch via B4 Relay
2026-06-06  0:21   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 18/23] dmaengine: sdxi: Encode context start, stop, and sync descriptors Nathan Lynch via B4 Relay
2026-06-06  0:02 ` [PATCH v3 19/23] dmaengine: sdxi: Provide context start and stop APIs Nathan Lynch via B4 Relay
2026-06-06  0:22   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors Nathan Lynch via B4 Relay
2026-06-06  0:20   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 21/23] dmaengine: sdxi: Add unit tests for descriptor encoding Nathan Lynch via B4 Relay
2026-06-06  0:26   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 22/23] dmaengine: sdxi: MSI/MSI-X vector allocation and mapping Nathan Lynch via B4 Relay
2026-06-06  0:31   ` sashiko-bot
2026-06-06  0:02 ` [PATCH v3 23/23] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
2026-06-06  0:33   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260605-sdxi-base-v3-9-4d38ca2bdffe@amd.com \
    --to=devnull+nathan.lynch.amd.com@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=John.Kariuki@amd.com \
    --cc=PradeepVineshReddy.Kodamati@amd.com \
    --cc=Stephen.Bates@amd.com \
    --cc=bhelgaas@google.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=kinseyho@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=nathan.lynch@amd.com \
    --cc=rientjes@google.com \
    --cc=shivankg@amd.com \
    --cc=tycho@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=wei.huang2@amd.com \
    --cc=weixugc@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox