From: Frank.Li@oss.nxp.com
To: "Manivannan Sadhasivam" <mani@kernel.org>,
"Vinod Koul" <vkoul@kernel.org>,
"Gustavo Pimentel" <Gustavo.Pimentel@synopsys.com>,
"Kees Cook" <kees@kernel.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Christoph Hellwig" <hch@lst.de>,
"Niklas Cassel" <cassel@kernel.org>
Cc: dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hardening@vger.kernel.org, linux-pci@vger.kernel.org,
linux-nvme@lists.infradead.org, Koichiro Den <den@valinux.co.jp>,
imx@lists.linux.dev, "Verma, Devendra" <devverma@amd.com>,
Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v3 05/10] dmaengine: dw-edma: Add helper dw_(edma|hdma)_v0_core_ch_enable()
Date: Thu, 02 Jul 2026 17:21:25 -0400 [thread overview]
Message-ID: <20260702-edma_ll-v3-5-877aa463740c@nxp.com> (raw)
In-Reply-To: <20260702-edma_ll-v3-0-877aa463740c@nxp.com>
From: Frank Li <Frank.Li@nxp.com>
Move the channel-enable logic into a new helper function,
dw_(edma|hdma)_v0_core_ch_enable(), in preparation for supporting dynamic
link entry additions.
No functional changes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/dma/dw-edma/dw-edma-v0-core.c | 128 +++++++++++++++++-----------------
drivers/dma/dw-edma/dw-hdma-v0-core.c | 54 +++++++-------
2 files changed, 93 insertions(+), 89 deletions(-)
diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index c341aa5343417..8d38867cd9983 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -318,6 +318,67 @@ static void dw_edma_v0_write_ll_link(struct dw_edma_chan *chan,
}
}
+static void dw_edma_v0_core_ch_enable(struct dw_edma_chan *chan)
+{
+ struct dw_edma *dw = chan->dw;
+ unsigned long flags;
+ u32 tmp;
+
+ /* Enable engine */
+ SET_RW_32(dw, chan->dir, engine_en, BIT(0));
+ if (dw->chip->mf == EDMA_MF_HDMA_COMPAT) {
+ switch (chan->id) {
+ case 0:
+ SET_RW_COMPAT(dw, chan->dir, ch0_pwr_en, BIT(0));
+ break;
+ case 1:
+ SET_RW_COMPAT(dw, chan->dir, ch1_pwr_en, BIT(0));
+ break;
+ case 2:
+ SET_RW_COMPAT(dw, chan->dir, ch2_pwr_en, BIT(0));
+ break;
+ case 3:
+ SET_RW_COMPAT(dw, chan->dir, ch3_pwr_en, BIT(0));
+ break;
+ case 4:
+ SET_RW_COMPAT(dw, chan->dir, ch4_pwr_en, BIT(0));
+ break;
+ case 5:
+ SET_RW_COMPAT(dw, chan->dir, ch5_pwr_en, BIT(0));
+ break;
+ case 6:
+ SET_RW_COMPAT(dw, chan->dir, ch6_pwr_en, BIT(0));
+ break;
+ case 7:
+ SET_RW_COMPAT(dw, chan->dir, ch7_pwr_en, BIT(0));
+ break;
+ }
+ }
+ /* Interrupt unmask - done, abort */
+ raw_spin_lock_irqsave(&dw->lock, flags);
+
+ tmp = GET_RW_32(dw, chan->dir, int_mask);
+ tmp &= ~FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id));
+ tmp &= ~FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id));
+ SET_RW_32(dw, chan->dir, int_mask, tmp);
+ /* Linked list error */
+ tmp = GET_RW_32(dw, chan->dir, linked_list_err_en);
+ tmp |= FIELD_PREP(EDMA_V0_LINKED_LIST_ERR_MASK, BIT(chan->id));
+ SET_RW_32(dw, chan->dir, linked_list_err_en, tmp);
+
+ raw_spin_unlock_irqrestore(&dw->lock, flags);
+
+ /* Channel control */
+ SET_CH_32(dw, chan->dir, chan->id, ch_control1,
+ (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE));
+ /* Linked list */
+ /* llp is not aligned on 64bit -> keep 32bit accesses */
+ SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
+ lower_32_bits(chan->ll_region.paddr));
+ SET_CH_32(dw, chan->dir, chan->id, llp.msb,
+ upper_32_bits(chan->ll_region.paddr));
+}
+
static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
{
struct dw_edma_burst *child;
@@ -366,74 +427,11 @@ static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
{
struct dw_edma_chan *chan = chunk->chan;
struct dw_edma *dw = chan->dw;
- unsigned long flags;
- u32 tmp;
dw_edma_v0_core_write_chunk(chunk);
- if (first) {
- /* Enable engine */
- SET_RW_32(dw, chan->dir, engine_en, BIT(0));
- if (dw->chip->mf == EDMA_MF_HDMA_COMPAT) {
- switch (chan->id) {
- case 0:
- SET_RW_COMPAT(dw, chan->dir, ch0_pwr_en,
- BIT(0));
- break;
- case 1:
- SET_RW_COMPAT(dw, chan->dir, ch1_pwr_en,
- BIT(0));
- break;
- case 2:
- SET_RW_COMPAT(dw, chan->dir, ch2_pwr_en,
- BIT(0));
- break;
- case 3:
- SET_RW_COMPAT(dw, chan->dir, ch3_pwr_en,
- BIT(0));
- break;
- case 4:
- SET_RW_COMPAT(dw, chan->dir, ch4_pwr_en,
- BIT(0));
- break;
- case 5:
- SET_RW_COMPAT(dw, chan->dir, ch5_pwr_en,
- BIT(0));
- break;
- case 6:
- SET_RW_COMPAT(dw, chan->dir, ch6_pwr_en,
- BIT(0));
- break;
- case 7:
- SET_RW_COMPAT(dw, chan->dir, ch7_pwr_en,
- BIT(0));
- break;
- }
- }
- /* Interrupt unmask - done, abort */
- raw_spin_lock_irqsave(&dw->lock, flags);
-
- tmp = GET_RW_32(dw, chan->dir, int_mask);
- tmp &= ~FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id));
- tmp &= ~FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id));
- SET_RW_32(dw, chan->dir, int_mask, tmp);
- /* Linked list error */
- tmp = GET_RW_32(dw, chan->dir, linked_list_err_en);
- tmp |= FIELD_PREP(EDMA_V0_LINKED_LIST_ERR_MASK, BIT(chan->id));
- SET_RW_32(dw, chan->dir, linked_list_err_en, tmp);
-
- raw_spin_unlock_irqrestore(&dw->lock, flags);
-
- /* Channel control */
- SET_CH_32(dw, chan->dir, chan->id, ch_control1,
- (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE));
- /* Linked list */
- /* llp is not aligned on 64bit -> keep 32bit accesses */
- SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
- lower_32_bits(chan->ll_region.paddr));
- SET_CH_32(dw, chan->dir, chan->id, llp.msb,
- upper_32_bits(chan->ll_region.paddr));
- }
+ if (first)
+ dw_edma_v0_core_ch_enable(chan);
dw_edma_v0_sync_ll_data(chan);
diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index 156b1cc225091..31bbdc6a40642 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -194,6 +194,34 @@ static void dw_hdma_v0_write_ll_link(struct dw_edma_chan *chan,
}
}
+static void dw_hdma_v0_core_ch_enable(struct dw_edma_chan *chan)
+{
+ struct dw_edma *dw = chan->dw;
+ u32 tmp;
+
+ /* Enable engine */
+ SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
+ /* Interrupt unmask - stop, abort */
+ tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
+ tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
+ /* Interrupt enable - stop, abort */
+ tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
+ if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
+ tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
+ SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
+ /* Channel control */
+ SET_CH_32(dw, chan->dir, chan->id, control1, HDMA_V0_LINKLIST_EN);
+ /* Linked list */
+ /* llp is not aligned on 64bit -> keep 32bit accesses */
+ SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
+ lower_32_bits(chan->ll_region.paddr));
+ SET_CH_32(dw, chan->dir, chan->id, llp.msb,
+ upper_32_bits(chan->ll_region.paddr));
+ /* Set consumer cycle */
+ SET_CH_32(dw, chan->dir, chan->id, cycle_sync,
+ HDMA_V0_CONSUMER_CYCLE_STAT | HDMA_V0_CONSUMER_CYCLE_BIT);
+}
+
static void dw_hdma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
{
struct dw_edma_chan *chan = chunk->chan;
@@ -232,33 +260,11 @@ static void dw_hdma_v0_core_ll_start(struct dw_edma_chunk *chunk, bool first)
{
struct dw_edma_chan *chan = chunk->chan;
struct dw_edma *dw = chan->dw;
- u32 tmp;
dw_hdma_v0_core_write_chunk(chunk);
- if (first) {
- /* Enable engine */
- SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
- /* Interrupt unmask - stop, abort */
- tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
- tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
- /* Interrupt enable - stop, abort */
- tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
- if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
- tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
- SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
- /* Channel control */
- SET_CH_32(dw, chan->dir, chan->id, control1, HDMA_V0_LINKLIST_EN);
- /* Linked list */
- /* llp is not aligned on 64bit -> keep 32bit accesses */
- SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
- lower_32_bits(chan->ll_region.paddr));
- SET_CH_32(dw, chan->dir, chan->id, llp.msb,
- upper_32_bits(chan->ll_region.paddr));
- /* Set consumer cycle */
- SET_CH_32(dw, chan->dir, chan->id, cycle_sync,
- HDMA_V0_CONSUMER_CYCLE_STAT | HDMA_V0_CONSUMER_CYCLE_BIT);
- }
+ if (first)
+ dw_hdma_v0_core_ch_enable(chan);
dw_hdma_v0_sync_ll_data(chan);
--
2.43.0
next prev parent reply other threads:[~2026-07-02 21:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 21:21 [PATCH v3 00/10] dmaengine: dw-edma: flatten desc structions and simple code Frank.Li
2026-07-02 21:21 ` [PATCH v3 01/10] dmaengine: dw-edma: Move control field update of DMA link to the last step Frank.Li
2026-07-02 21:31 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 02/10] dmaengine: dw-edma: Add xfer_sz field to struct dw_edma_chunk Frank.Li
2026-07-02 21:39 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 03/10] dmaengine: dw-edma: Move ll_region from struct dw_edma_chunk to struct dw_edma_chan Frank.Li
2026-07-02 21:31 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 04/10] dmaengine: dw-edma: Pass down dw_edma_chan to reduce one level of indirection Frank.Li
2026-07-02 21:28 ` sashiko-bot
2026-07-02 21:21 ` Frank.Li [this message]
2026-07-02 21:29 ` [PATCH v3 05/10] dmaengine: dw-edma: Add helper dw_(edma|hdma)_v0_core_ch_enable() sashiko-bot
2026-07-02 21:21 ` [PATCH v3 06/10] dmaengine: dw-edma: Add callbacks to fill link list entries Frank.Li
2026-07-02 21:31 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 07/10] dmaengine: dw-edma: Add non_ll_start() callback Frank.Li
2026-07-02 21:36 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 08/10] dmaengine: dw-edma: Use common dw_edma_core_start() for both eDMA and HDMA Frank.Li
2026-07-02 21:38 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 09/10] dmaengine: dw-edma: Use burst array instead of linked list Frank.Li
2026-07-02 21:40 ` sashiko-bot
2026-07-02 21:21 ` [PATCH v3 10/10] dmaengine: dw-edma: Remove struct dw_edma_chunk Frank.Li
2026-07-02 21:38 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702-edma_ll-v3-5-877aa463740c@nxp.com \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Gustavo.Pimentel@synopsys.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=den@valinux.co.jp \
--cc=devverma@amd.com \
--cc=dmaengine@vger.kernel.org \
--cc=gustavoars@kernel.org \
--cc=hch@lst.de \
--cc=imx@lists.linux.dev \
--cc=kees@kernel.org \
--cc=kishon@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=mani@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox