DMA Engine development
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
	Xuelin Shi <xuelin.shi@freescale.com>,
	Harninder Rai <harninder.rai@freescale.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] dmaengine: fsl_raid: free resources in probe
Date: Sat, 18 Jul 2026 16:17:15 -0700	[thread overview]
Message-ID: <20260718231716.230144-1-rosenp@gmail.com> (raw)

Add free_irq() in the error unwind of fsl_re_chan_probe() and in
fsl_re_remove_chan() so the interrupt is always released.

Also add tasklet_kill(). Present in _remove but not _probe.

Also add platform_device_put on failure as of_platform_device_create()
increases the reference count and needs platform_device_put on failure.
Requires placing the pointer in the struct for the _remove function.
While at it, use platform_get/set_drvdata as there's no need for using a
device pointer for that.

Fixes: ad80da658bbc ("dmaengine: Driver support for FSL RaidEngine device.")
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/dma/fsl_raid.c | 32 ++++++++++++++++++++------------
 drivers/dma/fsl_raid.h |  1 +
 2 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c
index 0b0b4e8fc821..b1a10292324d 100644
--- a/drivers/dma/fsl_raid.c
+++ b/drivers/dma/fsl_raid.c
@@ -212,10 +212,11 @@ static void fsl_re_dequeue(struct tasklet_struct *t)
 /* Per Job Ring interrupt handler */
 static irqreturn_t fsl_re_isr(int irq, void *data)
 {
+	struct platform_device *pdata = data;
 	struct fsl_re_chan *re_chan;
 	u32 irqstate, status;
 
-	re_chan = dev_get_drvdata((struct device *)data);
+	re_chan = platform_get_drvdata(pdata);
 
 	irqstate = in_be32(&re_chan->jrregs->jr_interrupt_status);
 	if (!irqstate)
@@ -645,7 +646,7 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 	struct platform_device *chan_ofdev;
 
 	dev = &ofdev->dev;
-	re_priv = dev_get_drvdata(dev);
+	re_priv = platform_get_drvdata(ofdev);
 	dma_dev = &re_priv->dma_dev;
 
 	chan = devm_kzalloc(dev, sizeof(*chan), GFP_KERNEL);
@@ -656,8 +657,7 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 	chan_ofdev = of_platform_device_create(np, NULL, dev);
 	if (!chan_ofdev) {
 		dev_err(dev, "Not able to create ofdev for jr %d\n", q);
-		ret = -EINVAL;
-		goto err_free;
+		return -EINVAL;
 	}
 
 	/* read reg property from dts */
@@ -683,17 +683,18 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 	chandev = &chan_ofdev->dev;
 	tasklet_setup(&chan->irqtask, fsl_re_dequeue);
 
-	ret = request_irq(chan->irq, fsl_re_isr, 0, chan->name, chandev);
+	ret = request_irq(chan->irq, fsl_re_isr, 0, chan->name, chan_ofdev);
 	if (ret) {
 		dev_err(dev, "Unable to register interrupt for JR %d\n", q);
 		ret = -EINVAL;
-		goto err_free;
+		goto err_free_tasklet;
 	}
 
 	re_priv->re_jrs[q] = chan;
 	chan->chan.device = dma_dev;
 	chan->chan.private = chan;
 	chan->dev = chandev;
+	chan->ofdev = chan_ofdev;
 	chan->re_dev = re_priv;
 
 	spin_lock_init(&chan->desc_lock);
@@ -707,7 +708,7 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 	if (!chan->inb_ring_virt_addr) {
 		dev_err(dev, "No dma memory for inb_ring_virt_addr\n");
 		ret = -ENOMEM;
-		goto err_free;
+		goto err_free_irq;
 	}
 
 	chan->oub_ring_virt_addr = dma_pool_alloc(chan->re_dev->hw_desc_pool,
@@ -739,7 +740,7 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 	out_be32(&chan->jrregs->jr_config_1,
 		 FSL_RE_CFG1_CBSI | FSL_RE_CFG1_CBS0 | status);
 
-	dev_set_drvdata(chandev, chan);
+	platform_set_drvdata(chan_ofdev, chan);
 
 	/* Enable RE/CHAN */
 	out_be32(&chan->jrregs->jr_command, FSL_RE_ENABLE);
@@ -749,7 +750,12 @@ static int fsl_re_chan_probe(struct platform_device *ofdev,
 err_free_1:
 	dma_pool_free(chan->re_dev->hw_desc_pool, chan->inb_ring_virt_addr,
 		      chan->inb_phys_addr);
+err_free_irq:
+	free_irq(chan->irq, chan_ofdev);
+err_free_tasklet:
+	tasklet_kill(&chan->irqtask);
 err_free:
+	platform_device_put(chan_ofdev);
 	return ret;
 }
 
@@ -828,7 +834,7 @@ static int fsl_re_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 	}
 
-	dev_set_drvdata(dev, re_priv);
+	platform_set_drvdata(ofdev, re_priv);
 
 	/* Parse Device tree to find out the total number of JQs present */
 	for_each_compatible_node_scoped(np, NULL, "fsl,raideng-v1.0-job-queue") {
@@ -864,21 +870,23 @@ static void fsl_re_remove_chan(struct fsl_re_chan *chan)
 {
 	tasklet_kill(&chan->irqtask);
 
+	free_irq(chan->irq, chan->ofdev);
+
 	dma_pool_free(chan->re_dev->hw_desc_pool, chan->inb_ring_virt_addr,
 		      chan->inb_phys_addr);
 
 	dma_pool_free(chan->re_dev->hw_desc_pool, chan->oub_ring_virt_addr,
 		      chan->oub_phys_addr);
+
+	platform_device_put(chan->ofdev);
 }
 
 static void fsl_re_remove(struct platform_device *ofdev)
 {
 	struct fsl_re_drv_private *re_priv;
-	struct device *dev;
 	int i;
 
-	dev = &ofdev->dev;
-	re_priv = dev_get_drvdata(dev);
+	re_priv = platform_get_drvdata(ofdev);
 
 	/* Cleanup chan related memory areas */
 	for (i = 0; i < re_priv->total_chans; i++)
diff --git a/drivers/dma/fsl_raid.h b/drivers/dma/fsl_raid.h
index adbfede330a7..34d362803610 100644
--- a/drivers/dma/fsl_raid.h
+++ b/drivers/dma/fsl_raid.h
@@ -270,6 +270,7 @@ struct fsl_re_chan {
 	struct list_head active_q; /* already issued on hw, not completed */
 	struct list_head submit_q;
 	struct list_head free_q; /* alloc available queue */
+	struct platform_device *ofdev;
 	struct device *dev;
 	struct fsl_re_drv_private *re_dev;
 	struct dma_chan chan;
-- 
2.55.0


             reply	other threads:[~2026-07-18 23:17 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-18 23:17 Rosen Penev [this message]
2026-07-18 23:28 ` [PATCH] dmaengine: fsl_raid: free resources in probe sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260718231716.230144-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=Frank.Li@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=harninder.rai@freescale.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vkoul@kernel.org \
    --cc=xuelin.shi@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox