From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>
Cc: "Frank Li" <Frank.li@nxp.com>,
"Kelvin Cao" <kelvin.cao@microchip.com>,
"Thomas Weißschuh" <linux@weissschuh.net>,
"Dave Jiang" <dave.jiang@intel.com>,
"George Ge" <george.ge@microchip.com>,
"Jaeyoung Chung" <jjy600901@snu.ac.kr>,
"Logan Gunthorpe" <logang@deltatee.com>,
Sashiko <sashiko-bot@kernel.org>
Subject: [PATCH v2 02/11] dmaengine: switchtec-dma: fix resource leak in alloc_chan_resources
Date: Tue, 21 Jul 2026 09:57:29 -0600 [thread overview]
Message-ID: <20260721155739.62120-3-logang@deltatee.com> (raw)
In-Reply-To: <20260721155739.62120-1-logang@deltatee.com>
switchtec_dma_alloc_chan_resources() returns directly on any later
failure, without ever freeing the descriptor rings and coherent DMA
memory it just allocated. The dmaengine core does not call
device_free_chan_resources() when device_alloc_chan_resources() fails,
so the driver has to unwind its own partial state.
The device-removed check also runs after ring_active and
comp_ring_active have already been set true, so a failure there left
the channel marked active despite alloc_chan_resources() reporting
failure.
Add an error-unwind path that disables the channel and frees the
descriptor rings on every failure after allocation. ring_active and
comp_ring_active are cleared under the same locks
switchtec_dma_free_chan_resources() already uses, since the completion
tasklet checks comp_ring_active under complete_lock before touching
the completion ring, and a stale IRQ can still be in flight when this
unwind path runs.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/dmaengine/20260707165555.350951F000E9@smtp.kernel.org
Fixes: 30eba9df76ad ("dmaengine: switchtec-dma: Implement hardware initialization and cleanup")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
---
drivers/dma/switchtec_dma.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/switchtec_dma.c b/drivers/dma/switchtec_dma.c
index a4a7d66d042d..f77da31aeb65 100644
--- a/drivers/dma/switchtec_dma.c
+++ b/drivers/dma/switchtec_dma.c
@@ -988,15 +988,15 @@ static int switchtec_dma_alloc_chan_resources(struct dma_chan *chan)
rc = enable_channel(swdma_chan);
if (rc)
- return rc;
+ goto err_free_desc;
rc = reset_channel(swdma_chan);
if (rc)
- return rc;
+ goto err_disable_channel;
rc = unhalt_channel(swdma_chan);
if (rc)
- return rc;
+ goto err_disable_channel;
swdma_chan->ring_active = true;
swdma_chan->comp_ring_active = true;
@@ -1007,7 +1007,8 @@ static int switchtec_dma_alloc_chan_resources(struct dma_chan *chan)
rcu_read_lock();
if (!rcu_dereference(swdma_dev->pdev)) {
rcu_read_unlock();
- return -ENODEV;
+ rc = -ENODEV;
+ goto err_ring_inactive;
}
perf_cfg = readl(&swdma_chan->mmio_chan_fw->perf_cfg);
@@ -1029,6 +1030,20 @@ static int switchtec_dma_alloc_chan_resources(struct dma_chan *chan)
FIELD_GET(PERF_MRRS_MASK, perf_cfg));
return SWITCHTEC_DMA_SQ_SIZE;
+
+err_ring_inactive:
+ spin_lock_bh(&swdma_chan->submit_lock);
+ swdma_chan->ring_active = false;
+ spin_unlock_bh(&swdma_chan->submit_lock);
+
+ spin_lock_bh(&swdma_chan->complete_lock);
+ swdma_chan->comp_ring_active = false;
+ spin_unlock_bh(&swdma_chan->complete_lock);
+err_disable_channel:
+ disable_channel(swdma_chan);
+err_free_desc:
+ switchtec_dma_free_desc(swdma_chan);
+ return rc;
}
static void switchtec_dma_free_chan_resources(struct dma_chan *chan)
--
2.47.3
next prev parent reply other threads:[~2026-07-21 16:10 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 15:57 [PATCH v2 00/11] dmaengine: miscellaneous fixes for ioat, switchtec_dma and plx_dma Logan Gunthorpe
2026-07-21 15:57 ` [PATCH v2 01/11] dmaengine: switchtec-dma: fix double-free in switchtec_dma_free_desc() Logan Gunthorpe
2026-07-21 16:27 ` sashiko-bot
2026-07-21 15:57 ` Logan Gunthorpe [this message]
2026-07-21 16:27 ` [PATCH v2 02/11] dmaengine: switchtec-dma: fix resource leak in alloc_chan_resources sashiko-bot
2026-07-21 15:57 ` [PATCH v2 03/11] dmaengine: switchtec-dma: halt channel on alloc_chan_resources error Logan Gunthorpe
2026-07-21 16:25 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 04/11] dmaengine: switchtec-dma: fix channel leak on registration failure Logan Gunthorpe
2026-07-21 16:30 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 05/11] dmaengine: switchtec-dma: make switchtec_dma_chans_release() void Logan Gunthorpe
2026-07-21 16:24 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 06/11] dmaengine: switchtec-dma: unlink channels before freeing on registration failure Logan Gunthorpe
2026-07-21 16:28 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 07/11] dmaengine: switchtec-dma: fix use-after-free of swdma_dev in remove() Logan Gunthorpe
2026-07-21 16:36 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 08/11] dmaengine: switchtec-dma: fix chan_status_irq cleanup on create() error Logan Gunthorpe
2026-07-21 16:26 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 09/11] dmaengine: ioat: disable relaxed ordering before registering the device Logan Gunthorpe
2026-07-21 16:31 ` Dave Jiang
2026-07-21 16:35 ` sashiko-bot
2026-07-21 15:57 ` [PATCH v2 10/11] dmaengine: ioat: use sysfs_emit() in per-channel sysfs show() Logan Gunthorpe
2026-07-21 16:28 ` sashiko-bot
2026-07-21 16:31 ` Dave Jiang
2026-07-21 15:57 ` [PATCH v2 11/11] dmaengine: plx_dma: fix NULL pointer deref in plx_dma_isr() Logan Gunthorpe
2026-07-21 16:35 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260721155739.62120-3-logang@deltatee.com \
--to=logang@deltatee.com \
--cc=Frank.li@nxp.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=george.ge@microchip.com \
--cc=jjy600901@snu.ac.kr \
--cc=kelvin.cao@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@weissschuh.net \
--cc=sashiko-bot@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox