From: Rosen Penev <rosenp@gmail.com>
To: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
"Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
linux-kernel@vger.kernel.org (open list),
linuxppc-dev@lists.ozlabs.org (open list:FREESCALE SOC DRIVERS),
linux-arm-kernel@lists.infradead.org (moderated list:FREESCALE
SOC DRIVERS)
Subject: [PATCH] dmaengine: bestcomm: ioremap and get irq early
Date: Sun, 16 Aug 2026 17:45:00 -0700 [thread overview]
Message-ID: <20260817004500.59251-1-rosenp@gmail.com> (raw)
Doing so allows handling potential -EPROBE_DEFER before any work gets
done.
Replace the open-coded resource lookup, request_mem_region, ioremap and
the manual iounmap/release_mem_region cleanup in probe/remove with the
managed devm_platform_get_and_ioremap_resource() helper. This removes the
now-unused error-unmap/release paths and simplifies the driver.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
dmaengine: bestcomm: get irq early
platform_get_irq can return -EPROBE_DEFER, which is useful to avoid
doing extra work in such a case
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/dma/bestcomm/bestcomm.c | 70 ++++++----------------
include/linux/fsl/bestcomm/bestcomm_priv.h | 2 +-
2 files changed, 18 insertions(+), 54 deletions(-)
diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c
index 432b43520ddc..55ad7bc34df7 100644
--- a/drivers/dma/bestcomm/bestcomm.c
+++ b/drivers/dma/bestcomm/bestcomm.c
@@ -48,6 +48,7 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
{
int i, tasknum = -1;
struct bcom_task *tsk;
+ int irq;
/* Don't try to do anything if bestcomm init failed */
if (!bcom_eng)
@@ -68,6 +69,10 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
if (tasknum < 0)
return NULL;
+ irq = platform_get_irq(bcom_eng->pdev, tasknum);
+ if (irq < 0)
+ return irq;
+
/* Allocate our structure */
tsk = kzalloc(sizeof(struct bcom_task) + priv_size, GFP_KERNEL);
if (!tsk)
@@ -77,10 +82,7 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
if (priv_size)
tsk->priv = (void*)tsk + sizeof(struct bcom_task);
- /* Get IRQ of that task */
- tsk->irq = irq_of_parse_and_map(bcom_eng->ofnode, tsk->tasknum);
- if (!tsk->irq)
- goto error;
+ tsk->irq = irq;
/* Init the BDs, if needed */
if (bd_count) {
@@ -102,8 +104,6 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
error:
if (tsk) {
- if (tsk->irq)
- irq_dispose_mapping(tsk->irq);
bcom_sram_free(tsk->bd);
kfree(tsk->cookie);
kfree(tsk);
@@ -126,7 +126,6 @@ bcom_task_free(struct bcom_task *tsk)
bcom_eng->tdt[tsk->tasknum].stop = 0;
/* Free everything */
- irq_dispose_mapping(tsk->irq);
bcom_sram_free(tsk->bd);
kfree(tsk->cookie);
kfree(tsk);
@@ -365,23 +364,24 @@ bcom_engine_cleanup(void)
static int mpc52xx_bcom_probe(struct platform_device *op)
{
struct device_node *ofn_sram;
- struct resource res_bcom;
+ struct resource *res_bcom;
+ void __iomem *regs;
int rv;
/* Inform user we're ok so far */
printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
- /* Get the bestcomm node */
- of_node_get(op->dev.of_node);
+ regs = devm_platform_get_and_ioremap_resource(op, 0, &res_bcom);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
/* Prepare SRAM */
ofn_sram = of_find_matching_node(NULL, mpc52xx_sram_ids);
if (!ofn_sram) {
printk(KERN_ERR DRIVER_NAME ": "
"No SRAM found in device tree\n");
- rv = -ENODEV;
- goto error_ofput;
+ return -ENODEV;
}
rv = bcom_sram_init(ofn_sram, DRIVER_NAME);
of_node_put(ofn_sram);
@@ -389,7 +389,7 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
if (rv) {
printk(KERN_ERR DRIVER_NAME ": "
"Error in SRAM init\n");
- goto error_ofput;
+ return rv;
}
/* Get a clean struct */
@@ -400,37 +400,14 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
}
/* Save the node */
- bcom_eng->ofnode = op->dev.of_node;
-
- /* Get, reserve & map io */
- if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't get resource\n");
- rv = -EINVAL;
- goto error_sramclean;
- }
-
- if (!request_mem_region(res_bcom.start, resource_size(&res_bcom),
- DRIVER_NAME)) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't request registers region\n");
- rv = -EBUSY;
- goto error_sramclean;
- }
-
- bcom_eng->regs_base = res_bcom.start;
- bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma));
- if (!bcom_eng->regs) {
- printk(KERN_ERR DRIVER_NAME ": "
- "Can't map registers\n");
- rv = -ENOMEM;
- goto error_release;
- }
+ bcom_eng->pdev = op;
+ bcom_eng->regs = regs;
+ bcom_eng->regs_base = res_bcom->start;
/* Now, do the real init */
rv = bcom_engine_init();
if (rv)
- goto error_unmap;
+ goto error_sramclean;
/* Done ! */
printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
@@ -439,15 +416,9 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
return 0;
/* Error path */
-error_unmap:
- iounmap(bcom_eng->regs);
-error_release:
- release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma));
error_sramclean:
kfree(bcom_eng);
bcom_sram_cleanup();
-error_ofput:
- of_node_put(op->dev.of_node);
printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n");
@@ -463,13 +434,6 @@ static void mpc52xx_bcom_remove(struct platform_device *op)
/* Cleanup SRAM */
bcom_sram_cleanup();
- /* Release regs */
- iounmap(bcom_eng->regs);
- release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma));
-
- /* Release the node */
- of_node_put(bcom_eng->ofnode);
-
/* Release memory */
kfree(bcom_eng);
bcom_eng = NULL;
diff --git a/include/linux/fsl/bestcomm/bestcomm_priv.h b/include/linux/fsl/bestcomm/bestcomm_priv.h
index 3b52f3ffbdf8..cddde7c74cb5 100644
--- a/include/linux/fsl/bestcomm/bestcomm_priv.h
+++ b/include/linux/fsl/bestcomm/bestcomm_priv.h
@@ -66,7 +66,7 @@ struct bcom_tdt {
* This holds all info needed globaly to handle the engine
*/
struct bcom_engine {
- struct device_node *ofnode;
+ struct platform_device *pdev;
struct mpc52xx_sdma __iomem *regs;
phys_addr_t regs_base;
--
2.55.0
next reply other threads:[~2026-08-17 0:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 0:45 Rosen Penev [this message]
2026-08-17 0:54 ` [PATCH] dmaengine: bestcomm: ioremap and get irq early sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260817004500.59251-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=Frank.Li@kernel.org \
--cc=chleroy@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox