From: Rosen Penev <rosenp@gmail.com>
To: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
Rosen Penev <rosenp@gmail.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] dmaengine: fsl_raid: fix sparse warnings
Date: Wed, 19 Aug 2026 17:28:16 -0700 [thread overview]
Message-ID: <20260820002816.17382-1-rosenp@gmail.com> (raw)
The register maps in fsl_raid.h annotate every field as __be32, but
they are accessed only through ioread32be()/iowrite32be(), which
already perform the byte swap and take plain u32 __iomem pointers.
The __be32 annotation therefore makes sparse reject each access:
drivers/dma/fsl_raid.c:116:17: sparse: incorrect type in argument 1
(different base types) ... got restricted __be32 [noderef] __iomem *
Drop __be32 from struct fsl_re_ctrl and struct fsl_re_chan_cfg; the
descriptor/CDB structures written via cpu_to_be32() keep their
annotations.
Also fix the remaining sparse warnings in fsl_raid.c:
- compare the desc pointer with !desc instead of desc <= 0 in the
three prep functions,
- byte swap cdb32 with cpu_to_be32() when programming the XOR, PQ
and MOVE command descriptor blocks; the plain u32 assignment is
broken on little-endian hosts.
No warnings remain.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608200637.ro1CqMxi-lkp@intel.com/
Fixes: 68b7fbc23529 ("dma: fsl_raid: keep MMIO bases as void __iomem and cast at access")
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/dma/fsl_raid.c | 12 +++++-----
drivers/dma/fsl_raid.h | 54 +++++++++++++++++++++---------------------
2 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c
index a35ddc1297ce..524a7329c3c4 100644
--- a/drivers/dma/fsl_raid.c
+++ b/drivers/dma/fsl_raid.c
@@ -350,7 +350,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_genq(
}
desc = fsl_re_chan_alloc_desc(re_chan, flags);
- if (desc <= 0)
+ if (!desc)
return NULL;
if (scf && (flags & DMA_PREP_CONTINUE)) {
@@ -365,7 +365,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_genq(
cdb |= FSL_RE_INTR_ON_ERROR << FSL_RE_CDB_ERROR_SHIFT;
cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT;
xor = desc->cdb_addr;
- xor->cdb32 = cdb;
+ xor->cdb32 = cpu_to_be32(cdb);
if (scf) {
/* compute q = src0*coef0^src1*coef1^..., * is GF(8) mult */
@@ -474,7 +474,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_pq(
src_cnt += 3;
desc = fsl_re_chan_alloc_desc(re_chan, flags);
- if (desc <= 0)
+ if (!desc)
return NULL;
/* Filling GenQQ CDB */
@@ -485,7 +485,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_pq(
cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT;
pq = desc->cdb_addr;
- pq->cdb32 = cdb;
+ pq->cdb32 = cpu_to_be32(cdb);
p = pq->gfm_q1;
/* Init gfm_q1[] */
@@ -558,7 +558,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_memcpy(
}
desc = fsl_re_chan_alloc_desc(re_chan, flags);
- if (desc <= 0)
+ if (!desc)
return NULL;
/* Filling move CDB */
@@ -568,7 +568,7 @@ static struct dma_async_tx_descriptor *fsl_re_prep_dma_memcpy(
cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT;
move = desc->cdb_addr;
- move->cdb32 = cdb;
+ move->cdb32 = cpu_to_be32(cdb);
/* Filling frame 0 of CFD with move CDB */
cf = desc->cf_addr;
diff --git a/drivers/dma/fsl_raid.h b/drivers/dma/fsl_raid.h
index 748047996bbc..1b6f6b82c7d3 100644
--- a/drivers/dma/fsl_raid.h
+++ b/drivers/dma/fsl_raid.h
@@ -109,59 +109,59 @@
struct fsl_re_ctrl {
/* General Configuration Registers */
- __be32 global_config; /* Global Configuration Register */
+ u32 global_config; /* Global Configuration Register */
u8 rsvd1[4];
- __be32 galois_field_config; /* Galois Field Configuration Register */
+ u32 galois_field_config; /* Galois Field Configuration Register */
u8 rsvd2[4];
- __be32 jq_wrr_config; /* WRR Configuration register */
+ u32 jq_wrr_config; /* WRR Configuration register */
u8 rsvd3[4];
- __be32 crc_config; /* CRC Configuration register */
+ u32 crc_config; /* CRC Configuration register */
u8 rsvd4[228];
- __be32 system_reset; /* System Reset Register */
+ u32 system_reset; /* System Reset Register */
u8 rsvd5[252];
- __be32 global_status; /* Global Status Register */
+ u32 global_status; /* Global Status Register */
u8 rsvd6[832];
- __be32 re_liodn_base; /* LIODN Base Register */
+ u32 re_liodn_base; /* LIODN Base Register */
u8 rsvd7[1712];
- __be32 re_version_id; /* Version ID register of RE */
- __be32 re_version_id_2; /* Version ID 2 register of RE */
+ u32 re_version_id; /* Version ID register of RE */
+ u32 re_version_id_2; /* Version ID 2 register of RE */
u8 rsvd8[512];
- __be32 host_config; /* Host I/F Configuration Register */
+ u32 host_config; /* Host I/F Configuration Register */
};
struct fsl_re_chan_cfg {
/* Registers for JR interface */
- __be32 jr_config_0; /* Job Queue Configuration 0 Register */
- __be32 jr_config_1; /* Job Queue Configuration 1 Register */
- __be32 jr_interrupt_status; /* Job Queue Interrupt Status Register */
+ u32 jr_config_0; /* Job Queue Configuration 0 Register */
+ u32 jr_config_1; /* Job Queue Configuration 1 Register */
+ u32 jr_interrupt_status; /* Job Queue Interrupt Status Register */
u8 rsvd1[4];
- __be32 jr_command; /* Job Queue Command Register */
+ u32 jr_command; /* Job Queue Command Register */
u8 rsvd2[4];
- __be32 jr_status; /* Job Queue Status Register */
+ u32 jr_status; /* Job Queue Status Register */
u8 rsvd3[228];
/* Input Ring */
- __be32 inbring_base_h; /* Inbound Ring Base Address Register - High */
- __be32 inbring_base_l; /* Inbound Ring Base Address Register - Low */
- __be32 inbring_size; /* Inbound Ring Size Register */
+ u32 inbring_base_h; /* Inbound Ring Base Address Register - High */
+ u32 inbring_base_l; /* Inbound Ring Base Address Register - Low */
+ u32 inbring_size; /* Inbound Ring Size Register */
u8 rsvd4[4];
- __be32 inbring_slot_avail; /* Inbound Ring Slot Available Register */
+ u32 inbring_slot_avail; /* Inbound Ring Slot Available Register */
u8 rsvd5[4];
- __be32 inbring_add_job; /* Inbound Ring Add Job Register */
+ u32 inbring_add_job; /* Inbound Ring Add Job Register */
u8 rsvd6[4];
- __be32 inbring_cnsmr_indx; /* Inbound Ring Consumer Index Register */
+ u32 inbring_cnsmr_indx; /* Inbound Ring Consumer Index Register */
u8 rsvd7[220];
/* Output Ring */
- __be32 oubring_base_h; /* Outbound Ring Base Address Register - High */
- __be32 oubring_base_l; /* Outbound Ring Base Address Register - Low */
- __be32 oubring_size; /* Outbound Ring Size Register */
+ u32 oubring_base_h; /* Outbound Ring Base Address Register - High */
+ u32 oubring_base_l; /* Outbound Ring Base Address Register - Low */
+ u32 oubring_size; /* Outbound Ring Size Register */
u8 rsvd8[4];
- __be32 oubring_job_rmvd; /* Outbound Ring Job Removed Register */
+ u32 oubring_job_rmvd; /* Outbound Ring Job Removed Register */
u8 rsvd9[4];
- __be32 oubring_slot_full; /* Outbound Ring Slot Full Register */
+ u32 oubring_slot_full; /* Outbound Ring Slot Full Register */
u8 rsvd10[4];
- __be32 oubring_prdcr_indx; /* Outbound Ring Producer Index */
+ u32 oubring_prdcr_indx; /* Outbound Ring Producer Index */
};
/*
--
2.55.0
next reply other threads:[~2026-08-20 0:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 0:28 Rosen Penev [this message]
2026-08-20 0:40 ` [PATCH] dmaengine: fsl_raid: fix sparse warnings sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820002816.17382-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox