From: Jelly Jia <Jelly.Jia@cixtech.com>
To: vkoul@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: devicetree@vger.kernel.org, Frank.Li@kernel.org,
robin.murphy@arm.com, cix-kernel-upstream@cixtech.com,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jelly Jia <Jelly.Jia@cixtech.com>
Subject: [PATCH v1 0/5] dmaengine: arm-dma350: Add slave support and CIX Sky1 integration
Date: Mon, 7 Sep 2026 11:33:59 +0800 [thread overview]
Message-ID: <20260907033404.596839-1-Jelly.Jia@cixtech.com> (raw)
Hello,
This series adds slave transfer support to the Arm DMA-350 driver and
the CIX Sky1 SoC integration around it.
Patch 1 fixes the CH_CTRL_USESRCTRIGIN definition: the source trigger
enable bit is bit 25, not bit 26 (which is the destination trigger
enable bit).
Patch 2 adds slave transfer support to the Arm DMA-350 driver:
scatter-gather and cyclic preparation, command-list allocation,
per-channel resource mapping including address translation through the
parent bus dma-ranges, and residue reporting. Slave transfers are
needed to serve peripheral requests, for example the audio FIFOs of
the CIX Sky1 audio subsystem.
Patch 3 documents the CIX Sky1 DMA-350 integration binding: a wrapper
node owning the SoC resources (clocks, resets, interrupt routing via
a syscon phandle, optional reserved memory) with the generic Arm
DMA-350 controller as its child.
Patch 4 adds the matching integration driver, which manages those
resources and populates the child controller.
Patch 5 adds the two Sky1 instances (FCH and AUDSS) to the SoC
devicetree.
The series is based on v7.3-rc1.
Testing:
- Built for arm64 with GCC 12.3 as both built-in and module, with no
new warnings; sparse clean.
- checkpatch clean; dt_binding_check and dtbs_check pass for the new
binding and nodes.
- Runtime-tested on CIX Sky1 boards with the FCH and AUDSS DMA-350
instances.
Signed-off-by: Jelly Jia <Jelly.Jia@cixtech.com>
Jelly Jia (5):
dmaengine: arm-dma350: Fix source trigger bit
dmaengine: arm-dma350: Add slave transfer support
dt-bindings: dma: Add CIX Sky1 DMA-350 integration
dmaengine: cix-sky1-dma350: Add Sky1 integration driver
arm64: dts: cix: Add Sky1 DMA-350 nodes
.../bindings/dma/cix,sky1-dma350.yaml | 102 +++
MAINTAINERS | 2 +
arch/arm64/boot/dts/cix/sky1.dtsi | 61 +-
drivers/dma/Kconfig | 15 +
drivers/dma/Makefile | 1 +
drivers/dma/arm-dma350.c | 642 +++++++++++++++++-
drivers/dma/cix-sky1-dma350.c | 206 ++++++
7 files changed, 993 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/cix,sky1-dma350.yaml
create mode 100644 drivers/dma/cix-sky1-dma350.c
base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
--
2.54.0
next reply other threads:[~2026-09-07 3:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 3:33 Jelly Jia [this message]
2026-09-07 3:34 ` [PATCH v1 1/5] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
2026-09-07 3:41 ` sashiko-bot
2026-09-07 3:34 ` [PATCH v1 2/5] dmaengine: arm-dma350: Add slave transfer support Jelly Jia
2026-09-07 3:49 ` sashiko-bot
2026-09-07 3:34 ` [PATCH v1 3/5] dt-bindings: dma: Add CIX Sky1 DMA-350 integration Jelly Jia
2026-09-07 17:15 ` Conor Dooley
2026-09-09 6:05 ` Jelly Jia
2026-09-09 10:45 ` Conor Dooley
2026-09-07 3:34 ` [PATCH v1 4/5] dmaengine: cix-sky1-dma350: Add Sky1 integration driver Jelly Jia
2026-09-07 3:44 ` sashiko-bot
2026-09-07 3:34 ` [PATCH v1 5/5] arm64: dts: cix: Add Sky1 DMA-350 nodes Jelly Jia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907033404.596839-1-Jelly.Jia@cixtech.com \
--to=jelly.jia@cixtech.com \
--cc=Frank.Li@kernel.org \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox