From: Linus Walleij <linusw@kernel.org>
To: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>
Cc: dmaengine@vger.kernel.org, phone-devel@vger.kernel.org,
Linus Walleij <linusw@kernel.org>,
sashiko-bot@kernel.org
Subject: [PATCH v3 11/22] dmaengine: ste_dma40: Fix LCLA allocation order
Date: Fri, 18 Sep 2026 18:24:30 +0200 [thread overview]
Message-ID: <20260918-dma40-fixes-v3-11-8dd8450669e8@kernel.org> (raw)
In-Reply-To: <20260918-dma40-fixes-v3-0-8dd8450669e8@kernel.org>
d40_lcla_allocate() calculates the number of pages needed for LCLA, but
passes that raw page count as the allocation order to __get_free_pages().
The same value is later passed to free_pages().
Store the allocation order with get_order() instead, and use a separate
byte size for allocation diagnostics, fallback kmalloc() sizing and DMA
mapping.
Fixes: 508849ade23c ("DMAENGINE: ste_dma40: allocate LCLA dynamically")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225114.AE1511F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
drivers/dma/ste_dma40.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index af885561f693..3ffed78b0527 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -417,8 +417,8 @@ struct d40_desc {
* @dma_addr: DMA address, if mapped
* @base_unaligned: The original kmalloc pointer, if kmalloc is used.
* This pointer is only there for clean-up on error.
- * @pages: The number of pages needed for all physical channels.
- * Only used later for clean-up on error
+ * @alloc_order: Order used for the LCLA page allocation.
+ * Only used later for clean-up on error.
* @lock: Lock to protect the content in this struct.
* @alloc_map: big map over which LCLA entry is own by which job.
*/
@@ -426,7 +426,7 @@ struct d40_lcla_pool {
void *base;
dma_addr_t dma_addr;
void *base_unaligned;
- int pages;
+ unsigned int alloc_order;
spinlock_t lock;
struct d40_desc **alloc_map;
};
@@ -3462,6 +3462,7 @@ static void __init d40_hw_init(struct d40_base *base)
static int __init d40_lcla_allocate(struct d40_base *base)
{
struct d40_lcla_pool *pool = &base->lcla_pool;
+ size_t lcla_size = SZ_1K * base->num_phy_chans;
unsigned long *page_list;
int i, j;
int ret;
@@ -3477,20 +3478,20 @@ static int __init d40_lcla_allocate(struct d40_base *base)
if (!page_list)
return -ENOMEM;
- /* Calculating how many pages that are required */
- base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
+ base->lcla_pool.alloc_order = get_order(lcla_size);
for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
page_list[i] = __get_free_pages(GFP_KERNEL,
- base->lcla_pool.pages);
+ base->lcla_pool.alloc_order);
if (!page_list[i]) {
- d40_err(base->dev, "Failed to allocate %d pages.\n",
- base->lcla_pool.pages);
+ d40_err(base->dev, "Failed to allocate %zu bytes.\n",
+ lcla_size);
ret = -ENOMEM;
for (j = 0; j < i; j++)
- free_pages(page_list[j], base->lcla_pool.pages);
+ free_pages(page_list[j],
+ base->lcla_pool.alloc_order);
goto free_page_list;
}
@@ -3500,7 +3501,7 @@ static int __init d40_lcla_allocate(struct d40_base *base)
}
for (j = 0; j < i; j++)
- free_pages(page_list[j], base->lcla_pool.pages);
+ free_pages(page_list[j], base->lcla_pool.alloc_order);
if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
base->lcla_pool.base = (void *)page_list[i];
@@ -3510,10 +3511,9 @@ static int __init d40_lcla_allocate(struct d40_base *base)
* alignment, try with allocating a big buffer.
*/
dev_warn(base->dev,
- "[%s] Failed to get %d pages @ 18 bit align.\n",
- __func__, base->lcla_pool.pages);
- base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
- base->num_phy_chans +
+ "[%s] Failed to get %zu bytes @ 18 bit align.\n",
+ __func__, lcla_size);
+ base->lcla_pool.base_unaligned = kmalloc(lcla_size +
LCLA_ALIGNMENT,
GFP_KERNEL);
if (!base->lcla_pool.base_unaligned) {
@@ -3525,8 +3525,7 @@ static int __init d40_lcla_allocate(struct d40_base *base)
LCLA_ALIGNMENT);
}
- pool->dma_addr = dma_map_single(base->dev, pool->base,
- SZ_1K * base->num_phy_chans,
+ pool->dma_addr = dma_map_single(base->dev, pool->base, lcla_size,
DMA_TO_DEVICE);
if (dma_mapping_error(base->dev, pool->dma_addr)) {
pool->dma_addr = 0;
@@ -3770,7 +3769,7 @@ static int __init d40_probe(struct platform_device *pdev)
if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
free_pages((unsigned long)base->lcla_pool.base,
- base->lcla_pool.pages);
+ base->lcla_pool.alloc_order);
kfree(base->lcla_pool.base_unaligned);
--
2.55.0
next prev parent reply other threads:[~2026-09-18 16:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 16:24 [PATCH v3 00/22] dmaengine: ste_dma40: Fix numerous accumulated bugs Linus Walleij
2026-09-18 16:24 ` [PATCH v3 01/22] dmaengine: ste_dma40: Fix physical cyclic capability Linus Walleij
2026-09-18 19:57 ` Frank Li
2026-09-18 16:24 ` [PATCH v3 02/22] dmaengine: ste_dma40: Fix cyclic transfer residue Linus Walleij
2026-09-18 16:44 ` sashiko-bot
2026-09-18 21:41 ` Frank Li
2026-09-18 16:24 ` [PATCH v3 03/22] dmaengine: ste_dma40: Fix failed start cleanup Linus Walleij
2026-09-18 16:24 ` [PATCH v3 04/22] dmaengine: ste_dma40: Fix probe runtime PM disable Linus Walleij
2026-09-18 16:24 ` [PATCH v3 05/22] dmaengine: ste_dma40: Check runtime PM in IRQ Linus Walleij
2026-09-18 16:24 ` [PATCH v3 06/22] dmaengine: ste_dma40: Handle runtime PM resume errors Linus Walleij
2026-09-18 16:37 ` sashiko-bot
2026-09-18 16:24 ` [PATCH v3 07/22] dmaengine: ste_dma40: Return IRQ_NONE without interrupt status Linus Walleij
2026-09-18 16:24 ` [PATCH v3 08/22] dmaengine: ste_dma40: Init hardware before registration Linus Walleij
2026-09-18 16:24 ` [PATCH v3 09/22] dmaengine: ste_dma40: Fix probe IRQ leak Linus Walleij
2026-09-18 16:24 ` [PATCH v3 10/22] dmaengine: ste_dma40: Fix DMA registration unwind Linus Walleij
2026-09-18 16:24 ` Linus Walleij [this message]
2026-09-18 16:24 ` [PATCH v3 12/22] dmaengine: ste_dma40: Fix probe LCLA free Linus Walleij
2026-09-18 16:24 ` [PATCH v3 13/22] dmaengine: ste_dma40: Put the LCPA SRAM node Linus Walleij
2026-09-18 16:24 ` [PATCH v3 14/22] dmaengine: ste_dma40: Fix memcpy channel parsing Linus Walleij
2026-09-18 16:24 ` [PATCH v3 15/22] dmaengine: ste_dma40: Validate disabled channel indexes Linus Walleij
2026-09-18 16:24 ` [PATCH v3 16/22] dmaengine: ste_dma40: Validate DMA specifier length Linus Walleij
2026-09-18 16:24 ` [PATCH v3 17/22] dmaengine: ste_dma40: Reject direction changes after allocation Linus Walleij
2026-09-18 16:24 ` [PATCH v3 18/22] dmaengine: ste_dma40: Fix logical channel bounds check Linus Walleij
2026-09-18 16:24 ` [PATCH v3 19/22] dmaengine: ste_dma40: Fix event group bounds Linus Walleij
2026-09-18 16:24 ` [PATCH v3 20/22] dmaengine: ste_dma40: Search all blocks for fixed logical channels Linus Walleij
2026-09-18 16:24 ` [PATCH v3 21/22] dmaengine: ste_dma40: Validate fixed physical channel indexes Linus Walleij
2026-09-18 16:24 ` [PATCH v3 22/22] dmaengine: ste_dma40: Validate memcpy configuration Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918-dma40-fixes-v3-11-8dd8450669e8@kernel.org \
--to=linusw@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox