From: Daniel Mack <daniel@zonque.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
dmaengine@vger.kernel.org, linux-media@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
netdev@vger.kernel.org, alsa-devel@alsa-project.org
Subject: [v2,08/13] ASoC: pxa: remove the dmaengine compat need
Date: Fri, 25 May 2018 10:35:37 +0200 [thread overview]
Message-ID: <5bc2aa06-7939-1ca4-6704-30f307edcda4@zonque.org> (raw)
On Thursday, May 24, 2018 09:06 AM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
>
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Daniel Mack <daniel@zonque.org>
> ---
> sound/arm/pxa2xx-ac97.c | 14 ++------------
> sound/arm/pxa2xx-pcm-lib.c | 6 +++---
> sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
> sound/soc/pxa/pxa2xx-i2s.c | 6 ++----
> 4 files changed, 12 insertions(+), 46 deletions(-)
>
> diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
> index 4bc244c40f80..236a63cdaf9f 100644
> --- a/sound/arm/pxa2xx-ac97.c
> +++ b/sound/arm/pxa2xx-ac97.c
> @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
> .reset = pxa2xx_ac97_legacy_reset,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 12,
> -};
> -
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_out",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_out_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 11,
> };
>
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_in",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_in_req,
> };
>
> static struct snd_pcm *pxa2xx_ac97_pcm;
> diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
> index e8da3b8ee721..dcbe7ecc1835 100644
> --- a/sound/arm/pxa2xx-pcm-lib.c
> +++ b/sound/arm/pxa2xx-pcm-lib.c
> @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
> if (ret < 0)
> return ret;
>
> - return snd_dmaengine_pcm_open_request_chan(substream,
> - pxad_filter_fn,
> - dma_params->filter_data);
> + return snd_dmaengine_pcm_open(
> + substream, dma_request_slave_channel(rtd->cpu_dai->dev,
> + dma_params->chan_name));
> }
> EXPORT_SYMBOL(__pxa2xx_pcm_open);
>
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 803818aabee9..1b41c0f2a8fb 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
> .reset = pxa2xx_ac97_cold_reset,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 11,
> -};
> -
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_in",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_stereo_in_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 12,
> };
>
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_out",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_stereo_out_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 10,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
> .addr = __PREG(MODR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mono_out",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 9,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
> .addr = __PREG(MODR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mono_in",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 8,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
> .addr = __PREG(MCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mic_mono",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req,
> };
>
> static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
> diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
> index 3fb60baf6eab..e7184de0de04 100644
> --- a/sound/soc/pxa/pxa2xx-i2s.c
> +++ b/sound/soc/pxa/pxa2xx-i2s.c
> @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
> static struct clk *clk_i2s;
> static int clk_ena = 0;
>
> -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
> static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
> .addr = __PREG(SADR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "tx",
> .maxburst = 32,
> - .filter_data = &pxa2xx_i2s_pcm_stereo_out_req,
> };
>
> -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
> static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
> .addr = __PREG(SADR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "rx",
> .maxburst = 32,
> - .filter_data = &pxa2xx_i2s_pcm_stereo_in_req,
> };
>
> static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
>
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-05-25 8:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 8:35 Daniel Mack [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-05-24 13:58 [v2,08/13] ASoC: pxa: remove the dmaengine compat need Mark Brown
2018-05-24 7:06 Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5bc2aa06-7939-1ca4-6704-30f307edcda4@zonque.org \
--to=daniel@zonque.org \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dmaengine@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=haojian.zhuang@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=richard@nod.at \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox