public inbox for dmaengine@vger.kernel.org
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Tom Zanussi <tom.zanussi@linux.intel.com>,
	<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<fenghua.yu@intel.com>, <vkoul@kernel.org>
Cc: <tony.luck@intel.com>, <wajdi.k.feghali@intel.com>,
	<james.guilford@intel.com>, <kanchana.p.sridhar@intel.com>,
	<vinodh.gopal@intel.com>, <giovanni.cabiddu@intel.com>,
	<pavel@ucw.cz>, <linux-kernel@vger.kernel.org>,
	<linux-crypto@vger.kernel.org>, <dmaengine@vger.kernel.org>
Subject: Re: [PATCH v10 14/14] dmaengine: idxd: Add support for device/wq defaults
Date: Mon, 27 Nov 2023 15:14:42 -0700	[thread overview]
Message-ID: <6d68774a-1f2d-4a9a-b96c-0e9c93655021@intel.com> (raw)
In-Reply-To: <20231127202704.1263376-15-tom.zanussi@linux.intel.com>



On 11/27/23 13:27, Tom Zanussi wrote:
> Add a load_device_defaults() function pointer to struct
> idxd_driver_data, which if defined, will be called when an idxd device
> is probed and will allow the idxd device to be configured with default
> values.
> 
> The load_device_defaults() function is passed an idxd device to work
> with to set specific device attributes.
> 
> Also add a load_device_defaults() implementation IAA devices; future
> patches would add default functions for other device types such as
> DSA.
> 
> The way idxd device probing works, if the device configuration is
> valid at that point e.g. at least one workqueue and engine is properly
> configured then the device will be enabled and ready to go.
> 
> The IAA implementation, idxd_load_iaa_device_defaults(), configures a
> single workqueue (wq0) for each device with the following default
> values:
> 
>       mode     	        "dedicated"
>       threshold		0
>       size		16
>       priority		10
>       type		IDXD_WQT_KERNEL
>       group		0
>       name              "iaa_crypto"
>       driver_name       "crypto"
> 
> Note that this now adds another configuration step for any users that
> want to configure their own devices/workqueus with something different
> in that they'll first need to disable (in the case of IAA) wq0 and the
> device itself before they can set their own attributes and re-enable,
> since they've been already been auto-enabled.  Note also that in order
> for the new configuration to be applied to the deflate-iaa crypto
> algorithm the iaa_crypto module needs to unregister the old version,
> which is accomplished by removing the iaa_crypto module, and
> re-registering it with the new configuration by reinserting the
> iaa_crypto module.
> 
> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
>  drivers/dma/idxd/Makefile   |  2 +-
>  drivers/dma/idxd/defaults.c | 53 +++++++++++++++++++++++++++++++++++++
>  drivers/dma/idxd/idxd.h     |  4 +++
>  drivers/dma/idxd/init.c     |  7 +++++
>  4 files changed, 65 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/dma/idxd/defaults.c
> 
> diff --git a/drivers/dma/idxd/Makefile b/drivers/dma/idxd/Makefile
> index c5e679070e46..2b4a0d406e1e 100644
> --- a/drivers/dma/idxd/Makefile
> +++ b/drivers/dma/idxd/Makefile
> @@ -4,7 +4,7 @@ obj-$(CONFIG_INTEL_IDXD_BUS) += idxd_bus.o
>  idxd_bus-y := bus.o
>  
>  obj-$(CONFIG_INTEL_IDXD) += idxd.o
> -idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o debugfs.o
> +idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o debugfs.o defaults.o
>  
>  idxd-$(CONFIG_INTEL_IDXD_PERFMON) += perfmon.o
>  
> diff --git a/drivers/dma/idxd/defaults.c b/drivers/dma/idxd/defaults.c
> new file mode 100644
> index 000000000000..a0c9faad8efe
> --- /dev/null
> +++ b/drivers/dma/idxd/defaults.c
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright(c) 2023 Intel Corporation. All rights rsvd. */
> +#include <linux/kernel.h>
> +#include "idxd.h"
> +
> +int idxd_load_iaa_device_defaults(struct idxd_device *idxd)
> +{
> +	struct idxd_engine *engine;
> +	struct idxd_group *group;
> +	struct idxd_wq *wq;
> +
> +	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
> +		return 0;
> +
> +	wq = idxd->wqs[0];
> +
> +	if (wq->state != IDXD_WQ_DISABLED)
> +		return -EPERM;
> +
> +	/* set mode to "dedicated" */
> +	set_bit(WQ_FLAG_DEDICATED, &wq->flags);
> +	wq->threshold = 0;
> +
> +	/* set size to 16 */
> +	wq->size = 16;
> +
> +	/* set priority to 10 */
> +	wq->priority = 10;
> +
> +	/* set type to "kernel" */
> +	wq->type = IDXD_WQT_KERNEL;
> +
> +	/* set wq group to 0 */
> +	group = idxd->groups[0];
> +	wq->group = group;
> +	group->num_wqs++;
> +
> +	/* set name to "iaa_crypto" */
> +	memset(wq->name, 0, WQ_NAME_SIZE + 1);
> +	strscpy(wq->name, "iaa_crypto", WQ_NAME_SIZE + 1);
> +
> +	/* set driver_name to "crypto" */
> +	memset(wq->driver_name, 0, DRIVER_NAME_SIZE + 1);
> +	strscpy(wq->driver_name, "crypto", DRIVER_NAME_SIZE + 1);
> +
> +	engine = idxd->engines[0];
> +
> +	/* set engine group to 0 */
> +	engine->group = idxd->groups[0];
> +	engine->group->num_engines++;
> +
> +	return 0;
> +}
> diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
> index 62ea21b25906..47de3f93ff1e 100644
> --- a/drivers/dma/idxd/idxd.h
> +++ b/drivers/dma/idxd/idxd.h
> @@ -277,6 +277,8 @@ struct idxd_dma_dev {
>  	struct dma_device dma;
>  };
>  
> +typedef int (*load_device_defaults_fn_t) (struct idxd_device *idxd);
> +
>  struct idxd_driver_data {
>  	const char *name_prefix;
>  	enum idxd_type type;
> @@ -286,6 +288,7 @@ struct idxd_driver_data {
>  	int evl_cr_off;
>  	int cr_status_off;
>  	int cr_result_off;
> +	load_device_defaults_fn_t load_device_defaults;
>  };
>  
>  struct idxd_evl {
> @@ -730,6 +733,7 @@ void idxd_unregister_devices(struct idxd_device *idxd);
>  void idxd_wqs_quiesce(struct idxd_device *idxd);
>  bool idxd_queue_int_handle_resubmit(struct idxd_desc *desc);
>  void multi_u64_to_bmap(unsigned long *bmap, u64 *val, int count);
> +int idxd_load_iaa_device_defaults(struct idxd_device *idxd);
>  
>  /* device interrupt control */
>  irqreturn_t idxd_misc_thread(int vec, void *data);
> diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
> index 0eb1c827a215..14df1f1347a8 100644
> --- a/drivers/dma/idxd/init.c
> +++ b/drivers/dma/idxd/init.c
> @@ -59,6 +59,7 @@ static struct idxd_driver_data idxd_driver_data[] = {
>  		.evl_cr_off = offsetof(struct iax_evl_entry, cr),
>  		.cr_status_off = offsetof(struct iax_completion_record, status),
>  		.cr_result_off = offsetof(struct iax_completion_record, error_code),
> +		.load_device_defaults = idxd_load_iaa_device_defaults,
>  	},
>  };
>  
> @@ -745,6 +746,12 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  		goto err;
>  	}
>  
> +	if (data->load_device_defaults) {
> +		rc = data->load_device_defaults(idxd);
> +		if (rc)
> +			dev_warn(dev, "IDXD loading device defaults failed\n");
> +	}
> +
>  	rc = idxd_register_devices(idxd);
>  	if (rc) {
>  		dev_err(dev, "IDXD sysfs setup failed\n");

  reply	other threads:[~2023-11-27 22:14 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-27 20:26 [PATCH v10 00/14] crypto: Add Intel Analytics Accelerator (IAA) crypto compression driver Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 01/14] dmaengine: idxd: add external module driver support for dsa_bus_type Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 02/14] dmaengine: idxd: Rename drv_enable/disable_wq to idxd_drv_enable/disable_wq, and export Tom Zanussi
2023-11-29 13:23   ` Vinod Koul
2023-11-27 20:26 ` [PATCH v10 03/14] dmaengine: idxd: Export descriptor management functions Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 04/14] dmaengine: idxd: Export wq resource " Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 05/14] dmaengine: idxd: Add wq private data accessors Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 06/14] dmaengine: idxd: add callback support for iaa crypto Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 07/14] crypto: iaa - Add IAA Compression Accelerator Documentation Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 08/14] crypto: iaa - Add Intel IAA Compression Accelerator crypto driver core Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 09/14] crypto: iaa - Add per-cpu workqueue table with rebalancing Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 10/14] crypto: iaa - Add compression mode management along with fixed mode Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 11/14] crypto: iaa - Add support for deflate-iaa compression algorithm Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 12/14] crypto: iaa - Add irq support for the crypto async interface Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 13/14] crypto: iaa - Add IAA Compression Accelerator stats Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 14/14] dmaengine: idxd: Add support for device/wq defaults Tom Zanussi
2023-11-27 22:14   ` Dave Jiang [this message]
2023-11-27 22:42     ` Tom Zanussi
2023-11-28 20:31   ` Fenghua Yu
2023-11-28 21:09     ` Tom Zanussi
2023-11-30  0:31       ` Yu, Fenghua
2023-11-30 15:18         ` Tom Zanussi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d68774a-1f2d-4a9a-b96c-0e9c93655021@intel.com \
    --to=dave.jiang@intel.com \
    --cc=davem@davemloft.net \
    --cc=dmaengine@vger.kernel.org \
    --cc=fenghua.yu@intel.com \
    --cc=giovanni.cabiddu@intel.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=james.guilford@intel.com \
    --cc=kanchana.p.sridhar@intel.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=tom.zanussi@linux.intel.com \
    --cc=tony.luck@intel.com \
    --cc=vinodh.gopal@intel.com \
    --cc=vkoul@kernel.org \
    --cc=wajdi.k.feghali@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox