[3/6] dma: tegra: fix incorrect case of DMA

[Ben Dooks <ben.dooks@codethink.co.uk>]

On 2018-11-06 13:14, Dmitry Osipenko wrote:
> On 31.10.2018 19:03, Ben Dooks wrote:
>> The use of Dma is annoying, since it is an acronym so should be all
>> upper case. Fix this throughout the driver.
>> 
>> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
>> ---
>>  drivers/dma/tegra20-apb-dma.c | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>> 
>> diff --git a/drivers/dma/tegra20-apb-dma.c 
>> b/drivers/dma/tegra20-apb-dma.c
>> index adfd918baedc..4f7d1e576d03 100644
>> --- a/drivers/dma/tegra20-apb-dma.c
>> +++ b/drivers/dma/tegra20-apb-dma.c
>> @@ -146,7 +146,7 @@ struct tegra_dma_channel_regs {
>>  };
>> 
>>  /*
>> - * tegra_dma_sg_req: Dma request details to configure hardware. This
>> + * tegra_dma_sg_req: DMA request details to configure hardware. This
>>   * contains the details for one transfer to configure DMA hw.
>>   * The client's request for data transfer can be broken into multiple
>>   * sub-transfer as per requester details and hw support.
>> @@ -574,7 +574,7 @@ static bool handle_continuous_head_request(struct 
>> tegra_dma_channel *tdc,
>>  	struct tegra_dma_sg_req *hsgreq = NULL;
>> 
>>  	if (list_empty(&tdc->pending_sg_req)) {
>> -		dev_err(tdc2dev(tdc), "Dma is running without req\n");
>> +		dev_err(tdc2dev(tdc), "DMA is running without req\n");
>>  		tegra_dma_stop(tdc);
>>  		return false;
>>  	}
>> @@ -922,7 +922,7 @@ static int get_transfer_param(struct 
>> tegra_dma_channel *tdc,
>>  		return 0;
>> 
>>  	default:
>> -		dev_err(tdc2dev(tdc), "Dma direction is not supported\n");
>> +		dev_err(tdc2dev(tdc), "DMA direction is not supported\n");
>>  		return -EINVAL;
>>  	}
>>  	return -EINVAL;
>> @@ -988,7 +988,7 @@ static struct dma_async_tx_descriptor 
>> *tegra_dma_prep_slave_sg(
>> 
>>  	dma_desc = tegra_dma_desc_get(tdc);
>>  	if (!dma_desc) {
>> -		dev_err(tdc2dev(tdc), "Dma descriptors not available\n");
>> +		dev_err(tdc2dev(tdc), "DMA descriptors not available\n");
>>  		return NULL;
>>  	}
>>  	INIT_LIST_HEAD(&dma_desc->tx_list);
>> @@ -1008,14 +1008,14 @@ static struct dma_async_tx_descriptor 
>> *tegra_dma_prep_slave_sg(
>>  		if ((len & 3) || (mem & 3) ||
>>  				(len > tdc->tdma->chip_data->max_dma_count)) {
>>  			dev_err(tdc2dev(tdc),
>> -				"Dma length/memory address is not supported\n");
>> +				"DMA length/memory address is not supported\n");
>>  			tegra_dma_desc_put(tdc, dma_desc);
>>  			return NULL;
>>  		}
>> 
>>  		sg_req = tegra_dma_sg_req_get(tdc);
>>  		if (!sg_req) {
>> -			dev_err(tdc2dev(tdc), "Dma sg-req not available\n");
>> +			dev_err(tdc2dev(tdc), "DMA sg-req not available\n");
>>  			tegra_dma_desc_put(tdc, dma_desc);
>>  			return NULL;
>>  		}
>> @@ -1147,7 +1147,7 @@ static struct dma_async_tx_descriptor 
>> *tegra_dma_prep_dma_cyclic(
>>  	while (remain_len) {
>>  		sg_req = tegra_dma_sg_req_get(tdc);
>>  		if (!sg_req) {
>> -			dev_err(tdc2dev(tdc), "Dma sg-req not available\n");
>> +			dev_err(tdc2dev(tdc), "DMA sg-req not available\n");
>>  			tegra_dma_desc_put(tdc, dma_desc);
>>  			return NULL;
>>  		}
>> 
> 
> 
> There is also:
> 
> 	if (!tdc->config_init) {
> 		dev_err(tdc2dev(tdc), "dma channel is not configured\n");
> 		return NULL;
> 	}
> 
> that could be fixed too and with that:
> 
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>

Thanks, fixed for next patch series.