messages from 2018-03-27 18:24:51 to 2018-04-27 06:26:02 UTC [more...]
[v2,3/5] dmaengine: sprd: Move DMA request mode and interrupt type into head file
2018-04-27 6:26 UTC
[v2,2/5] dmaengine: sprd: Define the DMA data width type
2018-04-27 6:25 UTC
[v2,1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-27 6:25 UTC
[v2,4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-27 6:24 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 5:11 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 17:40 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:43 UTC
[2/2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 16:27 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:26 UTC
[2/2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 16:12 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:12 UTC
dmaengine: Update email address for Vinod
2018-04-26 6:37 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-04-25 20:08 UTC
dmaengine: ti: New directory for Texas Instruments DMA drivers
2018-04-25 9:29 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-25 9:18 UTC
[v5] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-25 9:16 UTC
dmaengine: ti: New directory for Texas Instruments DMA drivers
2018-04-25 8:45 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-24 9:50 UTC
[v4] dmaengine: rcar-dmac: Document R-Car D3 bindings
2018-04-24 8:51 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-24 3:55 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-23 12:56 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-23 12:56 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-23 9:29 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-23 9:20 UTC
[09/15] net: irda: pxaficp_ir: remove the dmaengine compat need
2018-04-23 8:37 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-23 8:08 UTC
[6/8] ASoC: sh: Update menu title and platform dependency
2018-04-23 7:56 UTC
[5/8] staging: emxx_udc: Change platform dependency to ARCH_RENESAS
2018-04-23 7:56 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-23 7:56 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-23 7:54 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-23 7:53 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-23 7:50 UTC
[2/6] dmaengine: at_xdmac: simplify getting .drvdata
2018-04-23 5:46 UTC
[1/6] dmaengine: at_hdmac: simplify getting .drvdata
2018-04-23 5:46 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-23 5:23 UTC
[04/15] media: pxa_camera: remove the dmaengine compat need
2018-04-22 11:06 UTC
[07/61] dma: simplify getting .drvdata
2018-04-22 9:14 UTC
[6/6] dmaengine: txx9dmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[5/6] dmaengine: ste_dma40: simplify getting .drvdata
2018-04-22 9:14 UTC
[4/6] dmaengine: idma64: simplify getting .drvdata
2018-04-22 9:14 UTC
[3/6] dmaengine: fsldma: simplify getting .drvdata
2018-04-22 9:14 UTC
[2/6] dmaengine: at_xdmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[1/6] dmaengine: at_hdmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-22 8:46 UTC
MAINTAINERS: add maintainer for Qualcomm HIDMA drivers
2018-04-22 6:32 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-22 6:22 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-22 6:21 UTC
[07/61] dma: simplify getting .drvdata
2018-04-22 6:17 UTC
[01/15] dmaengine: pxa: use a dma slave map
2018-04-22 6:13 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-21 8:07 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 15:22 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-20 14:53 UTC
[PATCH/RFC,8/8] arm64: renesas: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-20 13:28 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-20 13:28 UTC
[6/8] ASoC: sh: Update menu title and platform dependency
2018-04-20 13:28 UTC
[5/8] staging: emxx_udc: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 13:28 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 13:28 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-20 4:21 UTC
MAINTAINERS: add maintainer for Qualcomm HIDMA drivers
2018-04-19 15:20 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-19 15:16 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-19 14:05 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-19 14:05 UTC
[07/61] dma: simplify getting .drvdata
2018-04-19 14:05 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-19 11:40 UTC
[v2,5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-19 2:00 UTC
[v2,4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-19 2:00 UTC
[v2,3/5] dmaengine: sprd: Move DMA request mode and interrupt type into head file
2018-04-19 2:00 UTC
[v2,2/5] dmaengine: sprd: Define the DMA data width type
2018-04-19 2:00 UTC
[v2,1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-19 2:00 UTC
[v5] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-19 0:31 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 13:06 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 7:03 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 6:39 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 6:31 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-18 5:40 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:54 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:44 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:42 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 14:53 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 13:58 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 13:46 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 12:54 UTC
[RFC,5/6] dmaengine: xilinx_dma: Program interrupt delay timeout
2018-04-17 12:48 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-17 12:28 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 11:43 UTC
[RFC,1/6] dt-bindings: dma: xilinx_dma: Add optional property has_axieth_connected
2018-04-17 10:54 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-17 10:45 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-17 6:06 UTC
[PATCHv2] dmaengine: dmatest: Remove use of VLAs
2018-04-16 15:36 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-16 15:35 UTC
[v4] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-16 15:33 UTC
dt-bindings: dmaengine: rcar-dmac: document R8A77965 support
2018-04-16 15:23 UTC
dt-bindings: dmaengine: rcar-dmac: document R8A77965 support
2018-04-16 13:56 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-16 6:32 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-16 3:58 UTC
[v4] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-15 18:12 UTC
[v3,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 13:52 UTC
[v3,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-13 13:52 UTC
[v2,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-13 12:30 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 11:48 UTC
[v2,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-13 11:09 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 10:48 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 10:40 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 10:11 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 10:09 UTC
[v2,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-13 9:45 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 8:39 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 6:41 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 6:36 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 6:17 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 5:44 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-13 4:02 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 3:43 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-13 3:39 UTC
[08/15] ASoC: pxa: remove the dmaengine compat need
2018-04-12 16:55 UTC
[08/15] ASoC: pxa: remove the dmaengine compat need
2018-04-12 15:26 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-12 11:36 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-12 11:30 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-12 9:37 UTC
[PATCHv2] dmaengine: dmatest: Remove use of VLAs
2018-04-12 2:26 UTC
[v2,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-11 15:14 UTC
[v2,2/2] dmaengine: stm32-mdma: Fix incomplete Hw descriptors allocator
2018-04-11 14:44 UTC
[v2,1/2] dmaengine: stm32-mdma: align TLEN and buffer length on burst
2018-04-11 14:44 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-11 12:13 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-11 10:51 UTC
[1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-11 10:49 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-11 9:40 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-11 9:36 UTC
[1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-11 9:24 UTC
[RFC,5/6] dmaengine: xilinx_dma: Program interrupt delay timeout
2018-04-11 9:11 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-11 9:11 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-11 9:08 UTC
[RFC,1/6] dt-bindings: dma: xilinx_dma: Add optional property has_axieth_connected
2018-04-11 9:05 UTC
[PATCHv2] dmaengine: dmatest: Remove use of VLAs
2018-04-11 1:02 UTC
[v3,2/2] drivers: remove force dma flag from buses
2018-04-10 19:21 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-10 19:20 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-10 15:38 UTC
[v4] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-10 15:37 UTC
[GIT,PULL] : dmaengine updates for v4.17-rc1
2018-04-10 15:33 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-10 7:46 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-10 7:46 UTC
[3/5] dmaengine: sprd: Move DMA request mode and interrupt type into head file
2018-04-10 7:46 UTC
[2/5] dmaengine: sprd: Define the DMA data width type
2018-04-10 7:46 UTC
[1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-10 7:46 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-10 4:00 UTC
[v4] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-10 0:41 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-09 23:19 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-09 23:14 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-09 22:48 UTC
dmaengine: dmatest: Remove use of VLAs
2018-04-09 21:06 UTC
[v3,2/2] drivers: remove force dma flag from buses
2018-04-09 20:27 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-04 19:21 UTC
[1/1] dmaengine:jz4740:fix memory leak
2018-04-04 12:45 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-04 10:18 UTC
[1/1] dmaengine:jz4740:fix memory leak
2018-04-04 6:00 UTC
dt-bindings: rcar-dmac: Document r8a77470 support
2018-04-04 5:55 UTC
dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks
2018-04-04 5:54 UTC
[1/1] dmaengine:jz4740:fix memory leak
2018-04-04 3:21 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-03 20:19 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-03 15:39 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-03 15:18 UTC
[12/15] dmaengine: pxa: make the filter function internal
2018-04-03 7:13 UTC
[14/15] ARM: pxa: change SSP devices allocation
2018-04-03 7:06 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-03 6:51 UTC
[15/15] ARM: pxa: change SSP DMA channels allocation
2018-04-02 18:46 UTC
[12/15] dmaengine: pxa: make the filter function internal
2018-04-02 16:35 UTC
[12/15] dmaengine: pxa: make the filter function internal
2018-04-02 16:25 UTC
[15/15] ARM: pxa: change SSP DMA channels allocation
2018-04-02 14:26 UTC
[14/15] ARM: pxa: change SSP devices allocation
2018-04-02 14:26 UTC
[13/15] ARM: pxa: remove the DMA IO resources
2018-04-02 14:26 UTC
[12/15] dmaengine: pxa: make the filter function internal
2018-04-02 14:26 UTC
[11/15] dmaengine: pxa: document pxad_param
2018-04-02 14:26 UTC
[10/15] ata: pata_pxa: remove the dmaengine compat need
2018-04-02 14:26 UTC
[09/15] net: irda: pxaficp_ir: remove the dmaengine compat need
2018-04-02 14:26 UTC
[08/15] ASoC: pxa: remove the dmaengine compat need
2018-04-02 14:26 UTC
[07/15] net: smc91x: remove the dmaengine compat need
2018-04-02 14:26 UTC
[06/15] net: smc911x: remove the dmaengine compat need
2018-04-02 14:26 UTC
[05/15] mtd: nand: pxa3xx: remove the dmaengine compat need
2018-04-02 14:26 UTC
[04/15] media: pxa_camera: remove the dmaengine compat need
2018-04-02 14:26 UTC
[03/15] mmc: pxamci: remove the dmaengine compat need
2018-04-02 14:26 UTC
[02/15] ARM: pxa: add dma slave map
2018-04-02 14:26 UTC
[01/15] dmaengine: pxa: use a dma slave map
2018-04-02 14:26 UTC
[RFC,6/6] dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
2018-04-02 10:39 UTC
[RFC,5/6] dmaengine: xilinx_dma: Program interrupt delay timeout
2018-04-02 10:39 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-02 10:39 UTC
[RFC,3/6] dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
2018-04-02 10:39 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-02 10:39 UTC
[RFC,1/6] dt-bindings: dma: xilinx_dma: Add optional property has_axieth_connected
2018-04-02 10:39 UTC
[v3,2/2] drivers: remove force dma flag from buses
2018-03-30 7:54 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-03-30 7:54 UTC
dt-bindings: rcar-dmac: Document r8a77470 support
2018-03-30 7:51 UTC
dt-bindings: rcar-dmac: Document r8a77470 support
2018-03-30 7:02 UTC
dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks
2018-03-29 16:53 UTC
dt-bindings: rcar-dmac: Document r8a77470 support
2018-03-29 10:11 UTC
dma-mapping: clearing GFP_ZERO flag caused crashes of Ethernet on arc/hsdk board
2018-03-28 7:53 UTC
dma-mapping: clearing GFP_ZERO flag caused crashes of Ethernet on arc/hsdk board
2018-03-27 21:19 UTC
dma-mapping: clearing GFP_ZERO flag caused crashes of Ethernet on arc/hsdk board
2018-03-27 18:24 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).