messages from 2018-04-16 06:32:05 to 2018-05-17 16:20:07 UTC [more...]
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-17 16:20 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-17 11:27 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:59 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:56 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:55 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:53 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:50 UTC
[v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 10:47 UTC
dmaengine: qcom: bam_dma: fix invalid assignment warning
2018-05-17 9:59 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 9:59 UTC
[v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 9:42 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 9:20 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-17 7:41 UTC
[1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
2018-05-17 7:40 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-05-17 6:39 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:28 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:11 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-17 6:04 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:02 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 5:21 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 5:14 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-17 4:31 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-17 4:19 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-16 13:06 UTC
[1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
2018-05-16 13:06 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-16 8:56 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-16 8:48 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 15:50 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 13:45 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 12:24 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 6:21 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-14 16:18 UTC
[v4,6/6] arm: dts: ls1021a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,5/6] arm64: dts: ls1046a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,4/6] arm64: dts: ls1043a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-14 12:03 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-14 12:03 UTC
[v4,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-14 12:03 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-11 15:57 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 13:06 UTC
[v3,1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-11 13:06 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-11 12:57 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 12:20 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 12:04 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 11:58 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 11:53 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 11:44 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-11 11:22 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-10 16:04 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-10 8:31 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-09 17:48 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-09 13:19 UTC
[v2,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-09 11:12 UTC
[v2,1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-09 11:11 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-09 6:59 UTC
dmaengine: sprd: Use devm_ioremap_resource() to map memory
2018-05-09 3:23 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-09 1:29 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-08 14:36 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-08 12:10 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-08 12:05 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-08 11:46 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-08 9:04 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-07 14:15 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-07 8:04 UTC
[2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-07 7:58 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-07 1:56 UTC
[-next] dmaengine: sprd: Fix potential NULL dereference in sprd_dma_probe()
2018-05-07 1:40 UTC
[2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-05 5:54 UTC
[04/15] media: pxa_camera: remove the dmaengine compat need
2018-05-04 19:29 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-04 19:18 UTC
[2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-04 8:06 UTC
[1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-04 8:06 UTC
[2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-04 8:01 UTC
[1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-04 8:01 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-03 16:48 UTC
[v4,2/2] drivers: remove force dma flag from buses
2018-05-03 16:36 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-03 16:35 UTC
[v4,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-05-03 12:21 UTC
[v4,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-05-03 12:21 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-03 9:01 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-02 14:37 UTC
[v3] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-05-02 4:37 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-02 4:32 UTC
[V2] dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available"
2018-05-02 4:29 UTC
[v4,2/2] drivers: remove force dma flag from buses
2018-05-01 12:34 UTC
[v4,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-30 10:41 UTC
[v2,4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-30 8:18 UTC
[V2] dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available"
2018-04-28 22:03 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-04-28 21:50 UTC
[v3] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-28 19:57 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-28 19:31 UTC
[v4] dmaengine: rcar-dmac: Document R-Car D3 bindings
2018-04-28 5:14 UTC
dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available"
2018-04-28 5:11 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-28 5:10 UTC
[v4,2/2] drivers: remove force dma flag from buses
2018-04-28 2:51 UTC
[v4,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-28 2:51 UTC
dmaengine: stm32-mdma: fix spelling mistake: "avalaible" -> "available"
2018-04-27 19:24 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-27 17:10 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 15:18 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 15:15 UTC
[v4] dmaengine: rcar-dmac: Document R-Car D3 bindings
2018-04-27 14:31 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 7:08 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 6:53 UTC
[v2,3/5] dmaengine: sprd: Move DMA request mode and interrupt type into head file
2018-04-27 6:26 UTC
[v2,2/5] dmaengine: sprd: Define the DMA data width type
2018-04-27 6:25 UTC
[v2,1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-27 6:25 UTC
[v2,4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-27 6:24 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-27 5:11 UTC
[v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 17:40 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:43 UTC
[2/2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 16:27 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:26 UTC
[2/2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
2018-04-26 16:12 UTC
[1/2] dmaengine: axi-dmac: Use devm_request_irq()
2018-04-26 16:12 UTC
dmaengine: Update email address for Vinod
2018-04-26 6:37 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-04-25 20:08 UTC
dmaengine: ti: New directory for Texas Instruments DMA drivers
2018-04-25 9:29 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-25 9:18 UTC
[v5] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-25 9:16 UTC
dmaengine: ti: New directory for Texas Instruments DMA drivers
2018-04-25 8:45 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-24 9:50 UTC
[v4] dmaengine: rcar-dmac: Document R-Car D3 bindings
2018-04-24 8:51 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-24 3:55 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-23 12:56 UTC
[v3,1/2] dma-mapping: move dma configuration to bus infrastructure
2018-04-23 12:56 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-23 9:29 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-23 9:20 UTC
[09/15] net: irda: pxaficp_ir: remove the dmaengine compat need
2018-04-23 8:37 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-23 8:08 UTC
[6/8] ASoC: sh: Update menu title and platform dependency
2018-04-23 7:56 UTC
[5/8] staging: emxx_udc: Change platform dependency to ARCH_RENESAS
2018-04-23 7:56 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-23 7:56 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-23 7:54 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-23 7:53 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-23 7:50 UTC
[2/6] dmaengine: at_xdmac: simplify getting .drvdata
2018-04-23 5:46 UTC
[1/6] dmaengine: at_hdmac: simplify getting .drvdata
2018-04-23 5:46 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-23 5:23 UTC
[04/15] media: pxa_camera: remove the dmaengine compat need
2018-04-22 11:06 UTC
[07/61] dma: simplify getting .drvdata
2018-04-22 9:14 UTC
[6/6] dmaengine: txx9dmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[5/6] dmaengine: ste_dma40: simplify getting .drvdata
2018-04-22 9:14 UTC
[4/6] dmaengine: idma64: simplify getting .drvdata
2018-04-22 9:14 UTC
[3/6] dmaengine: fsldma: simplify getting .drvdata
2018-04-22 9:14 UTC
[2/6] dmaengine: at_xdmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[1/6] dmaengine: at_hdmac: simplify getting .drvdata
2018-04-22 9:14 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-22 8:46 UTC
MAINTAINERS: add maintainer for Qualcomm HIDMA drivers
2018-04-22 6:32 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-22 6:22 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-22 6:21 UTC
[07/61] dma: simplify getting .drvdata
2018-04-22 6:17 UTC
[01/15] dmaengine: pxa: use a dma slave map
2018-04-22 6:13 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-21 8:07 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 15:22 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-20 14:53 UTC
[PATCH/RFC,8/8] arm64: renesas: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-20 13:28 UTC
[PATCH/RFC,7/8] ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol
2018-04-20 13:28 UTC
[6/8] ASoC: sh: Update menu title and platform dependency
2018-04-20 13:28 UTC
[5/8] staging: emxx_udc: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[4/8] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 13:28 UTC
[3/8,media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[2/8] dmaengine: shdmac: Change platform check to CONFIG_ARCH_RENESAS
2018-04-20 13:28 UTC
[1/8] arm: shmobile: Change platform dependency to ARCH_RENESAS
2018-04-20 13:28 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-20 4:21 UTC
MAINTAINERS: add maintainer for Qualcomm HIDMA drivers
2018-04-19 15:20 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-19 15:16 UTC
[09/61] dmaengine: qcom: simplify getting .drvdata
2018-04-19 14:05 UTC
[08/61] dmaengine: dw: simplify getting .drvdata
2018-04-19 14:05 UTC
[07/61] dma: simplify getting .drvdata
2018-04-19 14:05 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-19 11:40 UTC
[v2,5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-19 2:00 UTC
[v2,4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-19 2:00 UTC
[v2,3/5] dmaengine: sprd: Move DMA request mode and interrupt type into head file
2018-04-19 2:00 UTC
[v2,2/5] dmaengine: sprd: Define the DMA data width type
2018-04-19 2:00 UTC
[v2,1/5] dmaengine: sprd: Define the DMA transfer step type
2018-04-19 2:00 UTC
[v5] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-19 0:31 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 13:06 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 7:03 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 6:39 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-18 6:31 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-18 5:40 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:54 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:44 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 15:42 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 14:53 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 13:58 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 13:46 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 12:54 UTC
[RFC,5/6] dmaengine: xilinx_dma: Program interrupt delay timeout
2018-04-17 12:48 UTC
[RFC,4/6] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
2018-04-17 12:28 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-04-17 11:43 UTC
[RFC,1/6] dt-bindings: dma: xilinx_dma: Add optional property has_axieth_connected
2018-04-17 10:54 UTC
[5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
2018-04-17 10:45 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-17 6:06 UTC
[PATCHv2] dmaengine: dmatest: Remove use of VLAs
2018-04-16 15:36 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-16 15:35 UTC
[v4] dmaengine: pl330: flush before wait, and add dev burst support
2018-04-16 15:33 UTC
dt-bindings: dmaengine: rcar-dmac: document R8A77965 support
2018-04-16 15:23 UTC
dt-bindings: dmaengine: rcar-dmac: document R8A77965 support
2018-04-16 13:56 UTC
[4/5] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-04-16 6:32 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).