messages from 2018-05-14 12:03:04 to 2018-06-14 12:37:19 UTC [more...]
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-14 12:37 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-14 8:36 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-14 8:34 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-14 7:26 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-14 2:15 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-13 11:36 UTC
[v3,5/6] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-13 9:54 UTC
[v3,4/6] dmaengine: imx-sdma: remove usless lock
2018-06-13 9:53 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-13 8:49 UTC
[2/2] dmaengine: xilinx_dma: Enable VDMA S2MM vertical flip support
2018-06-13 7:34 UTC
[1/2] dt-bindings: dmaengine: xilinx_dma: Add VDMA vertical flip property
2018-06-13 7:34 UTC
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-12 17:34 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 17:30 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 17:28 UTC
[v3,4/4] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-12 16:35 UTC
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-12 16:35 UTC
[v3,2/4] dmaengine: fsl-edma: add fsl-edma-common
2018-06-12 16:34 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 16:34 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-12 16:32 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 8:12 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 7:59 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 7:40 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-12 4:02 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-12 4:00 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-11 19:54 UTC
[v2] dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:49 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:38 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:37 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:30 UTC
[v3,6/6] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-11 14:59 UTC
[v3,5/6] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-11 14:59 UTC
[v3,4/6] dmaengine: imx-sdma: remove usless lock
2018-06-11 14:59 UTC
[v3,3/6] Revert "dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt"
2018-06-11 14:59 UTC
[v3,2/6] dmaengine: imx-sdma: add virt-dma support
2018-06-11 14:59 UTC
[v3,1/6] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
2018-06-11 14:59 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-11 8:14 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-11 4:21 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-09 12:43 UTC
[v2,5/5] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-08 13:44 UTC
[v2,4/5] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-08 13:44 UTC
[v2,3/5] dmaengine: imx-sdma: remove usless lock
2018-06-08 13:44 UTC
[v2,2/5] Revert "dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt"
2018-06-08 13:44 UTC
[v2,1/5] dmaengine: imx-sdma: add virt-dma support
2018-06-08 13:44 UTC
[v2,0/5] add virt-dma support for imx-sdma
2018-06-08 9:43 UTC
[v2,1/5] dmaengine: imx-sdma: add virt-dma support
2018-06-08 8:43 UTC
[v2,0/5] add virt-dma support for imx-sdma
2018-06-08 8:43 UTC
[v2,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-06 20:07 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-06-06 13:34 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-06 11:16 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-06 7:21 UTC
[v2,4/4] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-05 21:46 UTC
[v2,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-05 21:45 UTC
[v2,2/4] dmaengine: fsl-edma: add fsl-edma-common
2018-06-05 21:45 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-05 21:45 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 17:24 UTC
[v2] dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
2018-06-05 16:59 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 16:30 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 16:28 UTC
[v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-05 12:56 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-04 9:53 UTC
[v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 15:27 UTC
DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 14:37 UTC
DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 14:22 UTC
[RFC] dmaengine: Add metadat_ops for dma_async_tx_descriptor
2018-06-01 10:24 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-06-01 10:17 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-31 1:58 UTC
[v5,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-31 0:49 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-30 20:59 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-05-30 20:12 UTC
[v2] dmaengine: pxa: add a default requestor policy
2018-05-30 20:00 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-30 18:51 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-05-30 17:29 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-30 10:27 UTC
[RESEND] dmaengine: pxa: add a default requestor policy
2018-05-30 10:25 UTC
[RESEND] dmaengine: pxa: add a default requestor policy
2018-05-29 19:13 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-05-29 15:04 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-29 10:38 UTC
[v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-29 10:22 UTC
[v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-29 10:21 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-29 10:19 UTC
[v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-29 10:14 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-29 9:59 UTC
[RESEND] dmaengine: pxa: add a default requestor policy
2018-05-29 7:24 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-29 7:09 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-29 7:07 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-29 5:17 UTC
[v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-29 4:49 UTC
[V4,1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-29 4:45 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-28 4:01 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-26 20:50 UTC
[RESEND] dmaengine: pxa: add a default requestor policy
2018-05-26 9:54 UTC
dmaengine: pxa: add a default requestor policy
2018-05-25 19:56 UTC
[v5,6/6] arm: dts: ls1021a: add qdma device tree nodes
2018-05-25 11:19 UTC
[v5,5/6] arm64: dts: ls1046a: add qdma device tree nodes
2018-05-25 11:19 UTC
[v5,4/6] arm64: dts: ls1043a: add qdma device tree nodes
2018-05-25 11:19 UTC
[v5,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-25 11:19 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-25 11:19 UTC
[v5,1/6] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-05-25 11:19 UTC
[v2,11/13] dmaengine: pxa: make the filter function internal
2018-05-25 10:59 UTC
[v2,10/13] dmaengine: pxa: document pxad_param
2018-05-25 10:59 UTC
[v2,08/13] ASoC: pxa: remove the dmaengine compat need
2018-05-25 8:35 UTC
[v2,13/13] ARM: pxa: change SSP DMA channels allocation
2018-05-25 7:56 UTC
[v2,08/13] ASoC: pxa: remove the dmaengine compat need
2018-05-24 13:58 UTC
[v2,05/13] mtd: rawnand: marvell: remove the dmaengine compat need
2018-05-24 9:30 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-24 7:20 UTC
[v2,13/13] ARM: pxa: change SSP DMA channels allocation
2018-05-24 7:07 UTC
[v2,12/13] ARM: pxa: remove the DMA IO resources
2018-05-24 7:07 UTC
[v2,11/13] dmaengine: pxa: make the filter function internal
2018-05-24 7:07 UTC
[v2,10/13] dmaengine: pxa: document pxad_param
2018-05-24 7:07 UTC
[v2,09/13] ata: pata_pxa: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,08/13] ASoC: pxa: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,07/13] net: smc91x: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,06/13] net: smc911x: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,05/13] mtd: rawnand: marvell: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,04/13] media: pxa_camera: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,03/13] mmc: pxamci: remove the dmaengine compat need
2018-05-24 7:06 UTC
[v2,02/13] ARM: pxa: add dma slave map
2018-05-24 7:06 UTC
[v2,01/13] dmaengine: pxa: use a dma slave map
2018-05-24 7:06 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-24 1:42 UTC
[05/15] mtd: nand: pxa3xx: remove the dmaengine compat need
2018-05-23 21:54 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-23 19:59 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-23 13:34 UTC
[v1] dmaengine: imx-sdma: add virt-dma support
2018-05-23 13:32 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-23 10:56 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-23 10:26 UTC
[V4,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-23 9:31 UTC
[V4,1/2] dmaengine: sprd: Optimize the sprd_dma_prep_dma_memcpy()
2018-05-23 9:31 UTC
[1/3] dmaengine: imx-sdma: Switch to SPDX identifier
2018-05-23 5:41 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-23 5:39 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-23 5:37 UTC
[1/3] dmaengine: imx-sdma: Switch to SPDX identifier
2018-05-23 5:20 UTC
[-next] dmaengine: sprd: Fix return value check in sprd_dma_probe()
2018-05-23 1:57 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-22 22:58 UTC
dmaengine: mcf-edma: add ColdFire mcf5441x eDMA support
2018-05-22 21:28 UTC
[v1] dmaengine: imx-sdma: add virt-dma support
2018-05-22 15:45 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-22 14:27 UTC
[-next] dmaengine: sprd: Fix return value check in sprd_dma_probe()
2018-05-22 11:48 UTC
[1/3] dmaengine: imx-sdma: Switch to SPDX identifier
2018-05-22 11:22 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-22 10:09 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-22 7:06 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-22 6:55 UTC
[v1] dma: imx-sdma: add virt-dma support
2018-05-22 6:16 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-22 3:37 UTC
[1/3] dmaengine: imx-sdma: Switch to SPDX identifier
2018-05-22 3:36 UTC
[3/3] dmaengine: imx-dma: Switch to SPDX identifier
2018-05-22 2:53 UTC
[2/3] dmaengine: mxs-dma: Switch to SPDX identifier
2018-05-22 2:53 UTC
[1/3] dmaengine: imx-sdma: Switch to SPDX identifier
2018-05-22 2:53 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-22 0:56 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-21 9:49 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-21 9:16 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-21 9:09 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-21 5:52 UTC
[05/15] mtd: nand: pxa3xx: remove the dmaengine compat need
2018-05-18 21:31 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-18 21:26 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-18 19:01 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-18 18:56 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-18 10:04 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-18 7:21 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-18 6:28 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-18 4:21 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-18 4:08 UTC
[1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
2018-05-18 4:06 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-18 4:03 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-17 17:22 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-17 16:20 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-17 11:27 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:59 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:56 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:55 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:53 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 10:50 UTC
[v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 10:47 UTC
dmaengine: qcom: bam_dma: fix invalid assignment warning
2018-05-17 9:59 UTC
dmaengine: qcom: bam_dma: fix some doc warnings
2018-05-17 9:59 UTC
[v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 9:42 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 9:20 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-17 7:41 UTC
[1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
2018-05-17 7:40 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-05-17 6:39 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:28 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:11 UTC
[v4,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-05-17 6:04 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 6:02 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-17 5:21 UTC
[v3,2/2] dmaengine: sprd: Add Spreadtrum DMA configuration
2018-05-17 5:14 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-17 4:31 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-17 4:19 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-05-16 13:06 UTC
[1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
2018-05-16 13:06 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-16 8:56 UTC
dmaengine: sprd: fix an NULL vs IS_ERR() bug
2018-05-16 8:48 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 15:50 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 13:45 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 12:24 UTC
Revert "dmaengine: pl330: add DMA_PAUSE feature"
2018-05-15 6:21 UTC
dmaengine: qcom: bam_dma: check if the runtime pm enabled
2018-05-14 16:18 UTC
[v4,6/6] arm: dts: ls1021a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,5/6] arm64: dts: ls1046a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,4/6] arm64: dts: ls1043a: add qdma device tree nodes
2018-05-14 12:03 UTC
[v4,3/6] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-05-14 12:03 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).