messages from 2018-06-01 10:17:36 to 2018-06-28 11:09:13 UTC [more...]
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-28 11:09 UTC
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-28 7:43 UTC
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-28 7:29 UTC
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-28 6:50 UTC
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
2018-06-28 6:27 UTC
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-28 6:23 UTC
[v5,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-28 6:11 UTC
[2/3] k3dma: add support to reserved minimum channels
2018-06-28 6:02 UTC
[1/3] dt-bindings: k3dma: add optional property dma_min_chan
2018-06-28 6:00 UTC
dmaengine: pl330: report BURST residue granularity
2018-06-28 5:54 UTC
[v6,3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-28 5:16 UTC
[v3] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-28 4:21 UTC
[16/26] dmaengine: Convert to new IDA API
2018-06-26 23:00 UTC
[v5,1/7] tty: serial: imx: correct dma cookie status
2018-06-26 19:22 UTC
[1/2] dt-bindings: dmaengine: xilinx_dma: Add VDMA vertical flip property
2018-06-26 17:00 UTC
[v3,5/5] dt-bindings: dmaengine: xilinx_dma: drop has-sg property
2018-06-25 17:30 UTC
[v3,2/5] dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
2018-06-25 17:29 UTC
Applied "dmaengine: pxa: use a dma slave map" to the asoc tree
2018-06-25 13:15 UTC
Applied "mmc: pxamci: remove the dmaengine compat need" to the asoc tree
2018-06-25 13:15 UTC
Applied "media: pxa_camera: remove the dmaengine compat need" to the asoc tree
2018-06-25 13:15 UTC
Applied "ata: pata_pxa: remove the dmaengine compat need" to the asoc tree
2018-06-25 13:15 UTC
Applied "dmaengine: pxa: document pxad_param" to the asoc tree
2018-06-25 13:15 UTC
Applied "ARM: pxa: remove the DMA IO resources" to the asoc tree
2018-06-25 13:15 UTC
Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree
2018-06-25 13:15 UTC
[v3,5/5] dt-bindings: dmaengine: xilinx_dma: drop has-sg property
2018-06-25 9:27 UTC
[v3,4/5] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-06-25 9:27 UTC
[v3,3/5] dmaengine: xilinx_dma: program hardware supported buffer length
2018-06-25 9:27 UTC
[v3,2/5] dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
2018-06-25 9:27 UTC
[v3,1/5] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
2018-06-25 9:27 UTC
[1/2] dt-bindings: dmaengine: xilinx_dma: Add VDMA vertical flip property
2018-06-25 9:06 UTC
[2/2] dmaengine: xilinx_dma: Enable VDMA S2MM vertical flip support
2018-06-25 9:05 UTC
[16/26] dmaengine: Convert to new IDA API
2018-06-24 7:57 UTC
[16/26] dmaengine: Convert to new IDA API
2018-06-23 23:06 UTC
[resend] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-06-23 12:33 UTC
[16/26] dmaengine: Convert to new IDA API
2018-06-23 12:30 UTC
[1/2] firmware: add more flexible request_firmware_async function
2018-06-23 0:52 UTC
[2/2] dmaengine: imx-sdma: request firmware with FW_OPT_NO_WARN
2018-06-22 14:49 UTC
[1/2] firmware: add more flexible request_firmware_async function
2018-06-22 14:49 UTC
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
2018-06-22 11:15 UTC
[v5,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-22 9:44 UTC
[v5,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-22 9:44 UTC
[v4,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-22 9:20 UTC
[3/3] k3dma: delete axi_config
2018-06-22 3:24 UTC
[2/3] k3dma: add support to reserved minimum channels
2018-06-22 3:24 UTC
[1/3] dt-bindings: k3dma: add optional property dma_min_chan
2018-06-22 3:24 UTC
[16/26] dmaengine: Convert to new IDA API
2018-06-21 21:28 UTC
[v4,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-21 18:31 UTC
[v4,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-21 17:35 UTC
[2/6] dmaengine: xilinx_dma: fix completion callback is not invoked for each DMA operation
2018-06-21 13:46 UTC
[v2,1/5] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-06-21 13:16 UTC
[v2,5/5] dt-bindings: xilinx_dma: drop has-sg property
2018-06-21 11:58 UTC
[v2,4/5] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-06-21 11:58 UTC
[v2,3/5] dmaengine: xilinx_dma: program hardware supported buffer length
2018-06-21 11:58 UTC
[v2,2/5] dt-bindings: xilinx_dma: add optional xlnx,sg-length-width property
2018-06-21 11:58 UTC
[v2,1/5] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-06-21 11:58 UTC
[v3,09/14] ASoC: pxa: remove the dmaengine compat need
2018-06-21 8:50 UTC
[5/6] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-06-20 14:57 UTC
[5/6] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-06-20 14:43 UTC
[3/6] dt-bindings: xilinx_dma: add required xlnx,lengthregwidth property
2018-06-20 14:37 UTC
[3/6] dt-bindings: xilinx_dma: add required xlnx,lengthregwidth property
2018-06-20 13:42 UTC
[2/6] dmaengine: xilinx_dma: fix completion callback is not invoked for each DMA operation
2018-06-20 13:32 UTC
[1/6] dmaengine: xilinx_dma: fix splitting transfer causes misalignments
2018-06-20 13:15 UTC
[2/6] dmaengine: xilinx_dma: fix completion callback is not invoked for each DMA operation
2018-06-20 12:36 UTC
[resend] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-06-20 12:01 UTC
[1/6] dmaengine: xilinx_dma: fix splitting transfer causes misalignments
2018-06-20 11:37 UTC
[6/6] dt-bindings: xilinx_dma: drop has-sg property
2018-06-20 8:36 UTC
[5/6] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-06-20 8:36 UTC
[4/6] dmaengine: xilinx_dma: fix hardcoded maximum transfer length may be wrong
2018-06-20 8:36 UTC
[3/6] dt-bindings: xilinx_dma: add required xlnx,lengthregwidth property
2018-06-20 8:36 UTC
[2/6] dmaengine: xilinx_dma: fix completion callback is not invoked for each DMA operation
2018-06-20 8:36 UTC
[1/6] dmaengine: xilinx_dma: fix splitting transfer causes misalignments
2018-06-20 8:36 UTC
[v4,2/2] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-19 19:41 UTC
[v4,1/2] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-06-19 19:41 UTC
[v5,7/7] dmaengine: imx-sdma: alloclate bd memory from dma pool
2018-06-19 16:57 UTC
[v5,6/7] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-19 16:57 UTC
[v5,5/7] dmaengine: imx-sdma: remove the maximum limitation for bd numbers
2018-06-19 16:57 UTC
[v5,4/7] dmaengine: imx-sdma: remove useless 'lock' and 'enabled' in 'struct sdma_channel'
2018-06-19 16:57 UTC
[v5,3/7] dmaengine: imx-sdma: add virt-dma support
2018-06-19 16:57 UTC
[v5,2/7] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
2018-06-19 16:56 UTC
[v5,1/7] tty: serial: imx: correct dma cookie status
2018-06-19 16:56 UTC
dmaengine: pl330: report BURST residue granularity
2018-06-19 13:20 UTC
MAINTAINERS: Update email-id of Sinan Kaya
2018-06-19 4:31 UTC
[v2] dmaengine: ioatdma: set the completion address register after channel reset
2018-06-19 4:30 UTC
[v2] dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
2018-06-19 4:29 UTC
[v4,26/26] fix a series of Documentation/ broken file name references
2018-06-19 4:14 UTC
[v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
2018-06-18 19:31 UTC
[v3,09/14] ASoC: pxa: remove the dmaengine compat need
2018-06-17 18:17 UTC
[v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
2018-06-17 18:12 UTC
[v3,14/14] ARM: pxa: change SSP DMA channels allocation
2018-06-17 17:02 UTC
[v3,13/14] ARM: pxa: remove the DMA IO resources
2018-06-17 17:02 UTC
[v3,12/14] dmaengine: pxa: make the filter function internal
2018-06-17 17:02 UTC
[v3,11/14] dmaengine: pxa: document pxad_param
2018-06-17 17:02 UTC
[v3,10/14] ata: pata_pxa: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,09/14] ASoC: pxa: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,08/14] net: smc91x: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,07/14] net: smc911x: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,05/14] media: pxa_camera: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,04/14] mmc: pxamci: remove the dmaengine compat need
2018-06-17 17:02 UTC
[v3,03/14] dmaengine: pxa: add a default requestor policy
2018-06-17 17:02 UTC
[v3,02/14] ARM: pxa: add dma slave map
2018-06-17 17:02 UTC
[v3,01/14] dmaengine: pxa: use a dma slave map
2018-06-17 17:02 UTC
[v4,26/26] fix a series of Documentation/ broken file name references
2018-06-16 15:52 UTC
[v4,26/26] fix a series of Documentation/ broken file name references
2018-06-15 16:30 UTC
[v6,7/7] arm: dts: ls1021a: add qdma device tree nodes
2018-06-15 10:22 UTC
[v6,6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-06-15 10:22 UTC
[v6,5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-06-15 10:22 UTC
[v6,4/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-06-15 10:22 UTC
[v6,3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-15 10:22 UTC
[v6,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-06-15 10:22 UTC
[v6,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-06-15 10:22 UTC
[v3] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 7:15 UTC
[v3] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 6:20 UTC
[v3] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 0:53 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 0:35 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 0:33 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-15 0:24 UTC
[v3,27/27] fix a series of Documentation/ broken file name references
2018-06-14 17:21 UTC
[v3,27/27] fix a series of Documentation/ broken file name references
2018-06-14 16:18 UTC
[v3,27/27] fix a series of Documentation/ broken file name references
2018-06-14 16:09 UTC
[v4,7/7] tty: serial: imx: split all dma setup operations out of 'port.lock' protector
2018-06-14 14:03 UTC
[v4,6/7] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-14 14:03 UTC
[v4,5/7] dmaengine: imx-sdma: remove the maximum limitation for bd numbers
2018-06-14 14:03 UTC
[v4,4/7] dmaengine: imx-sdma: remove useless 'lock' and 'enabled' in 'struct sdma_channel'
2018-06-14 14:02 UTC
[v4,3/7] dmaengine: imx-sdma: add virt-dma support
2018-06-14 14:02 UTC
[v4,2/7] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
2018-06-14 14:02 UTC
[v4,1/7] tty: serial: imx: correct dma cookie status
2018-06-14 14:02 UTC
MAINTAINERS: Update email-id of Sinan Kaya
2018-06-14 13:37 UTC
[v4,7/7] tty: serial: imx: split all dma setup operations out of 'port.lock' protector
2018-06-14 13:35 UTC
[v4,6/7] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-14 13:35 UTC
[v4,5/7] dmaengine: imx-sdma: remove the maximum limitation for bd numbers
2018-06-14 13:35 UTC
[v4,4/7] dmaengine: imx-sdma: remove useless 'lock' and 'enabled' in 'struct sdma_channel'
2018-06-14 13:35 UTC
[v4,3/7] dmaengine: imx-sdma: add virt-dma support
2018-06-14 13:35 UTC
[v4,2/7] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
2018-06-14 13:35 UTC
[v4,1/7] tty: serial: imx: correct dma cookie status
2018-06-14 13:35 UTC
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-14 12:37 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-14 8:36 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-14 8:34 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-14 7:26 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-14 2:15 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-13 11:36 UTC
[v3,5/6] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-13 9:54 UTC
[v3,4/6] dmaengine: imx-sdma: remove usless lock
2018-06-13 9:53 UTC
[v2] dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-13 8:49 UTC
[2/2] dmaengine: xilinx_dma: Enable VDMA S2MM vertical flip support
2018-06-13 7:34 UTC
[1/2] dt-bindings: dmaengine: xilinx_dma: Add VDMA vertical flip property
2018-06-13 7:34 UTC
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-12 17:34 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 17:30 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 17:28 UTC
[v3,4/4] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-12 16:35 UTC
[v3,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-12 16:35 UTC
[v3,2/4] dmaengine: fsl-edma: add fsl-edma-common
2018-06-12 16:34 UTC
[v3,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-12 16:34 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-12 16:32 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 8:12 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 7:59 UTC
dmaengine: rcar-dmac: don't use DMAC error interrupt
2018-06-12 7:40 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-12 4:02 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-12 4:00 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-11 19:54 UTC
[v2] dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:49 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:38 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:37 UTC
dmaengine: ioatdma: set the completion address register after channel reset
2018-06-11 19:30 UTC
[v3,6/6] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-11 14:59 UTC
[v3,5/6] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-11 14:59 UTC
[v3,4/6] dmaengine: imx-sdma: remove usless lock
2018-06-11 14:59 UTC
[v3,3/6] Revert "dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt"
2018-06-11 14:59 UTC
[v3,2/6] dmaengine: imx-sdma: add virt-dma support
2018-06-11 14:59 UTC
[v3,1/6] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
2018-06-11 14:59 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-11 8:14 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-11 4:21 UTC
[RESEND,v2] dmaengine: pxa: add a default requestor policy
2018-06-09 12:43 UTC
[v2,5/5] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
2018-06-08 13:44 UTC
[v2,4/5] dmaengine: imx-sdma: remove the maximum limation for bd numbers
2018-06-08 13:44 UTC
[v2,3/5] dmaengine: imx-sdma: remove usless lock
2018-06-08 13:44 UTC
[v2,2/5] Revert "dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt"
2018-06-08 13:44 UTC
[v2,1/5] dmaengine: imx-sdma: add virt-dma support
2018-06-08 13:44 UTC
[v2,0/5] add virt-dma support for imx-sdma
2018-06-08 9:43 UTC
[v2,1/5] dmaengine: imx-sdma: add virt-dma support
2018-06-08 8:43 UTC
[v2,0/5] add virt-dma support for imx-sdma
2018-06-08 8:43 UTC
[v2,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-06 20:07 UTC
[2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
2018-06-06 13:34 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-06 11:16 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-06 7:21 UTC
[v2,4/4] dmaengine: fsl-edma: add ColdFire mcf5441x edma support
2018-06-05 21:46 UTC
[v2,3/4] dmaengine: fsl-edma: remove all the edma common code
2018-06-05 21:45 UTC
[v2,2/4] dmaengine: fsl-edma: add fsl-edma-common
2018-06-05 21:45 UTC
[v2,1/4] dmaengine: fsl-edma: add config and makefile changes for mcf-edma
2018-06-05 21:45 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 17:24 UTC
[v2] dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
2018-06-05 16:59 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 16:30 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-05 16:28 UTC
[v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-05 12:56 UTC
[v5,2/6] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-06-04 9:53 UTC
[v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 15:27 UTC
DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 14:37 UTC
DMA: OMAP: fix OMAP1510 incorrect residue_granularity
2018-06-02 14:22 UTC
[RFC] dmaengine: Add metadat_ops for dma_async_tx_descriptor
2018-06-01 10:24 UTC
[RFC,2/6] dmaengine: xilinx_dma: Pass AXI4-Stream control words to netdev dma client
2018-06-01 10:17 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).