messages from 2018-08-29 15:52:12 to 2018-09-24 13:00:21 UTC [more...]
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-09-24 13:00 UTC
[RFC,4/5] dmaengine: ti: New driver for K3 UDMA
2018-09-24 13:00 UTC
[RFC,3/5] dt-bindings: dma: ti: Add document for K3 UDMA
2018-09-24 13:00 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-09-24 13:00 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-09-24 13:00 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-24 12:01 UTC
[08/12] dmaengine: idma: remove dma_slave_config direction usage
2018-09-21 17:04 UTC
[07/12] dmaengine: hsu: remove dma_slave_config direction usage
2018-09-21 17:03 UTC
[05/12] dmaengine: dw: remove dma_slave_config direction usage
2018-09-21 17:03 UTC
[4/4] arm: dts: mt2701: add uart APDMA to device tree
2018-09-20 6:41 UTC
[3/4] serial: 8250-mtk: add uart DMA support
2018-09-20 6:41 UTC
[2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-09-20 6:41 UTC
[1/4] dt-bindings: dma: uart: add uart dma bindings
2018-09-20 6:41 UTC
[V3,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-09-19 19:52 UTC
[V3,4/5] dmaengine: dmatest: Add transfer_size parameter
2018-09-19 19:52 UTC
[V3,3/5] dmaengine: dmatest: Add alignment parameter
2018-09-19 19:52 UTC
[V3,2/5] dmaengine: dmatest: Use fixed point div to calculate iops
2018-09-19 19:52 UTC
[V3,1/5] dmaengine: dmatest: Add support for multi channel testing
2018-09-19 19:52 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-19 9:38 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-19 9:20 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:56 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:34 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:32 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 22:52 UTC
[03/12] dmaengine: coh901318: remove dma_slave_config direction usage
2018-09-18 22:32 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-18 19:20 UTC
[-next,v3] dmaengine: mcf-edma: avoid warning for wrong pointer cast
2018-09-18 19:16 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 16:35 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-09-18 16:25 UTC
[v5,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-09-18 16:21 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-17 15:18 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-17 11:03 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-17 7:51 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-14 19:35 UTC
[-next,v3] dmaengine: mcf-edma: avoid warning for wrong pointer cast
2018-09-14 19:13 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-14 18:53 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 18:51 UTC
[v2,4/4] dmaengine: imx-sdma: use GFP_NOWAIT for dma allocations
2018-09-14 17:06 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-14 17:06 UTC
[v2,2/4] Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
2018-09-14 17:06 UTC
[v2,1/4] Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"
2018-09-14 17:06 UTC
dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 15:43 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 13:35 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 12:13 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 12:13 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 11:48 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 11:35 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-14 9:42 UTC
[1/2] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers
2018-09-14 8:40 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 7:11 UTC
[-next] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 6:29 UTC
[-next] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-13 18:47 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-13 14:52 UTC
[01/12] dmaengine: at_hdmac: remove dma_slave_config direction usage
2018-09-13 8:23 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-13 0:51 UTC
[v3,1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC
2018-09-13 0:51 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-12 18:36 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-12 17:00 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 12:09 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 12:05 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-12 9:47 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 9:42 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-12 9:22 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 7:31 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 7:26 UTC
[v3,2/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-12 6:45 UTC
[v3,1/2] dmaengine: doc: Add sections for per descriptor metadata support
2018-09-12 6:45 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 5:25 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 4:35 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 3:01 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:48 UTC
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
2018-09-11 23:44 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-11 23:40 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:37 UTC
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
2018-09-11 23:20 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:05 UTC
[02/12] dmaengine: bcm2835: remove dma_slave_config direction usage
2018-09-11 21:11 UTC
dmaengine: zx-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 15:17 UTC
dmaengine: idma64: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:37 UTC
dmaengine: zx-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:31 UTC
dmaengine: k3dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:25 UTC
dmaengine: moxart-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:17 UTC
[v2,1/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-11 12:33 UTC
[1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
2018-09-11 12:03 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-11 9:31 UTC
[12/12] dmaengine: mmp_tdma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[11/12] dmaengine: ep93xx_dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[10/12] dmaengine: k3dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[09/12] dmaengine: imx-dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[08/12] dmaengine: idma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[07/12] dmaengine: hsu: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[06/12] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[05/12] dmaengine: dw: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[04/12] dmaengine: jz4740: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[03/12] dmaengine: coh901318: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[02/12] dmaengine: bcm2835: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[01/12] dmaengine: at_hdmac: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 8:30 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-11 8:18 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 8:17 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 7:48 UTC
dma: idma64: replace spin_lock_irqsave with spin_lock
2018-09-11 7:44 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-11 7:41 UTC
[v2,2/2] dmaengine: doc: Add sections for per descriptor metadata support
2018-09-11 7:36 UTC
[v2,1/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-11 7:33 UTC
[v1,1/1] dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
2018-09-11 7:31 UTC
[v1,7/7] dmaengine: stm32-mdma: enable descriptor_reuse
2018-09-11 7:27 UTC
[v1,6/7] dmaengine: stm32-dma: enable descriptor_reuse
2018-09-11 7:26 UTC
[v1,5/7] dmaengine: stm32-mdma: Add DMA/MDMA chaining support
2018-09-11 7:26 UTC
[v1,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-09-11 7:26 UTC
[v1,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-09-11 7:26 UTC
[v1,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-09-11 7:26 UTC
[v1,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-09-11 7:26 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-11 7:00 UTC
[v10,1/4] dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)
2018-09-11 6:37 UTC
dmaengine: Revert "dmaengine: add COMPILE_TEST for the drivers"
2018-09-11 6:09 UTC
[v5,3/7] dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
2018-09-10 18:19 UTC
dma: sh: convert to SPDX identifiers
2018-09-10 13:10 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-10 9:58 UTC
[v7,3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-09-07 19:28 UTC
dma: idma64: replace spin_lock_irqsave with spin_lock
2018-09-07 19:02 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-07 12:08 UTC
[v5,7/7] dmaengine: xilinx_dma: Drop SG support for VDMA IP
2018-09-07 6:25 UTC
[v5,6/7] dt-bindings: dmaengine: xilinx_dma: drop has-sg property
2018-09-07 6:25 UTC
[v5,5/7] dmaengine: xilinx_dma: autodetect whether the HW supports scatter-gather
2018-09-07 6:25 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-09-07 6:24 UTC
[v5,3/7] dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
2018-09-07 6:24 UTC
[v5,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-09-07 6:24 UTC
[v5,1/7] dmaengine: xilinx_dma: commonize DMA copy size calculation
2018-09-07 6:24 UTC
dma: sh: convert to SPDX identifiers
2018-09-07 1:58 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-09-05 9:13 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-09-04 19:15 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-09-04 8:43 UTC
[1/2] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
2018-09-04 8:43 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-04 2:36 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-09-03 14:49 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-03 13:11 UTC
[RESEND,v2] dmaengine: sprd: Support DMA link-list mode
2018-09-03 11:30 UTC
[1/3] dmaengine: fsldma: move spin_lock_bh to spin_lock in tasklet
2018-09-03 10:55 UTC
[v4,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
2018-09-03 10:49 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-03 8:59 UTC
[v4,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
2018-09-03 8:46 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-03 8:41 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-09-03 8:19 UTC
[3/3] tty: serial: Add Tx DMA support for UART in Actions Semi Owl SoCs
2018-09-01 16:42 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-01 16:42 UTC
[1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
2018-09-01 16:42 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 15:48 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 15:42 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 15:01 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 14:22 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 14:02 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 13:41 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-08-31 12:20 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 11:29 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 11:17 UTC
[V2,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-08-31 11:03 UTC
[V2,4/5] dmaengine: dmatest: Add transfer_size parameter
2018-08-31 11:03 UTC
[V2,3/5] dmaengine: dmatest: Add alignment parameter
2018-08-31 11:03 UTC
[V2,2/5] dmaengine: dmatest: Use fixed point div to calculate iops
2018-08-31 11:03 UTC
[V2,1/5] dmaengine: dmatest: Add support for multi channel testing
2018-08-31 11:03 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-08-31 9:49 UTC
[v4,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
2018-08-30 13:27 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-30 13:26 UTC
[4/4] dmaengine: imx-sdma: use GFP_NOWAIT for dma descriptor allocations
2018-08-30 13:22 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-08-30 13:22 UTC
[2/4] Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
2018-08-30 13:22 UTC
[1/4] Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"
2018-08-30 13:22 UTC
[v2,2/2] dmaengine: doc: Add sections for per descriptor metadata support
2018-08-30 12:19 UTC
[v2,1/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-30 12:19 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-08-30 12:09 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-30 9:32 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-30 8:57 UTC
[v4,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cylic mode align split descriptors
2018-08-30 8:11 UTC
[v5,18/18] MIPS: JZ4740: DTS: Add DMA nodes
2018-08-29 21:33 UTC
[v5,17/18] MIPS: JZ4770: DTS: Add DMA nodes
2018-08-29 21:32 UTC
[v5,16/18] MIPS: JZ4780: DTS: Update DMA node to match driver changes
2018-08-29 21:32 UTC
[v5,15/18] dmaengine: dma-jz4780: Use dma_set_residue()
2018-08-29 21:32 UTC
[v5,14/18] dmaengine: dma-jz4780: Further residue status fix
2018-08-29 21:32 UTC
[v5,13/18] dmaengine: dma-jz4780: Set DTCn register explicitly
2018-08-29 21:32 UTC
[v5,12/18] dmaengine: dma-jz4780: Simplify jz4780_dma_desc_residue()
2018-08-29 21:32 UTC
[v5,11/18] dmaengine: dma-jz4780: Add missing residue DTC mask
2018-08-29 21:32 UTC
[v5,10/18] dmaengine: dma-jz4780: Enable Fast DMA to the AIC
2018-08-29 21:32 UTC
[v5,09/18] dmaengine: dma-jz4780: Add support for the JZ4725B SoC
2018-08-29 21:32 UTC
[v5,08/18] dmaengine: dma-jz4780: Add support for the JZ4740 SoC
2018-08-29 21:32 UTC
[v5,07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
2018-08-29 21:32 UTC
[v5,06/18] dmaengine: dma-jz4780: Don't depend on MACH_JZ4780
2018-08-29 21:32 UTC
[v5,05/18] dmaengine: dma-jz4780: Use 4-word descriptors
2018-08-29 21:32 UTC
[v5,04/18] dmaengine: dma-jz4780: Separate chan/ctrl registers
2018-08-29 21:32 UTC
[v5,03/18] dmaengine: dma-jz4780: Avoid hardcoding number of channels
2018-08-29 21:32 UTC
[v5,02/18] dmaengine: dma-jz4780: Return error if not probed from DT
2018-08-29 21:32 UTC
[v5,01/18] dt-bindings: jz4780-dma: Update bindings to reflect driver changes
2018-08-29 21:32 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-08-29 17:05 UTC
[1/2] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers
2018-08-29 16:50 UTC
[2/2] dmaengine: dw: Add alternative ACPI HIDs for Cherry Trail DMA controllers
2018-08-29 16:50 UTC
[v2,1/2] dmaengine: use SPDX identifier for Renesas drivers
2018-08-29 16:30 UTC
[2/2] dmaengine: dw: Add alternative ACPI HIDs for Cherry Trail DMA controllers
2018-08-29 16:25 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-29 16:22 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-29 16:14 UTC
dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-08-29 15:52 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).