messages from 2018-09-11 07:31:16 to 2018-10-10 04:05:44 UTC [more...]
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 4:05 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-10 4:03 UTC
[RFC,4/5] dmaengine: ti: New driver for K3 UDMA
2018-10-10 4:00 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 13:46 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 11:41 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-10-09 11:22 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 11:05 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-10-09 10:49 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 10:47 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:59 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 8:57 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-09 8:40 UTC
[v3,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-10-09 8:17 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:02 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:00 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:48 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:31 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:30 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-10-09 7:22 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:22 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 7:18 UTC
[7/7] dmaengine: stm32-dma: properly mask irq bits
2018-10-09 5:47 UTC
[6/7] dmaengine: stm32-dma: fix max items per transfer
2018-10-09 5:47 UTC
[5/7] dmaengine: stm32-dma: fix DMA IRQ status handling
2018-10-09 5:47 UTC
[4/7] dmaengine: stm32-dma: Improve memory burst management
2018-10-09 5:47 UTC
[3/7] dmaengine: stm32-dma: fix typo and reported checkpatch warnings
2018-10-09 5:47 UTC
[2/7] dmaengine: stm32-dma: fix incomplete configuration in cyclic mode
2018-10-09 5:47 UTC
[1/7] dmaengine: stm32-dma: threshold manages with bitfield feature
2018-10-09 5:47 UTC
dmaengine: owl: Fix warnings generated during build
2018-10-08 18:26 UTC
dmaengine: owl: Fix warnings generated during build
2018-10-08 17:16 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-10-08 6:46 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-07 16:00 UTC
[v3,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-10-07 14:59 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-10-07 14:58 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-07 14:57 UTC
dmaengine: rcar-dmac: set scatter/gather max segment size
2018-10-07 14:34 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-07 14:14 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-06 16:22 UTC
[RFC,2/2] dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
2018-10-06 7:09 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-05 19:11 UTC
[v2,2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-10-05 15:01 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-05 14:57 UTC
XXX PCI/AER: remove unused variables
2018-10-05 14:26 UTC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
2018-10-05 14:24 UTC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
2018-10-04 21:03 UTC
XXX PCI/AER: remove unused variables
2018-10-02 21:27 UTC
XXX PCI/AER: remove unused variables
2018-10-02 21:02 UTC
[v1,1/1] dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
2018-10-02 15:02 UTC
[v5,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-10-02 14:58 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-10-02 14:56 UTC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
2018-10-02 14:52 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
2018-10-02 14:49 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-10-02 14:48 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-10-02 14:42 UTC
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
2018-10-02 14:41 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
2018-10-01 13:00 UTC
[v2,1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
2018-09-30 2:04 UTC
[v2,4/4] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-29 17:18 UTC
[v2,3/4] dmaengine: xilinx_dma: Introduce helper macro for preparing dma address
2018-09-29 17:17 UTC
[v2,2/4] dmaengine: xilinx_dma: Refactor axidma channel validation
2018-09-29 17:17 UTC
[v2,1/4] dmaengine: xilinx_dma: Refactor axidma channel allocation
2018-09-29 17:17 UTC
[v2,3/3] tty: serial: Add Tx DMA support for UART in Actions Semi Owl SoCs
2018-09-29 7:46 UTC
[v2,2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-29 7:46 UTC
[v2,1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
2018-09-29 7:46 UTC
[7/7] dmaengine: sprd: Add me as one of the module authors
2018-09-29 5:49 UTC
[6/7] dmaengine: sprd: Support DMA 2-stage transfer mode
2018-09-29 5:49 UTC
[5/7] dmaengine: sprd: Support DMA link-list cyclic callback
2018-09-29 5:49 UTC
[4/7] dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
2018-09-29 5:49 UTC
[3/7] dmaengine: sprd: Fix the last link-list configuration
2018-09-29 5:49 UTC
[2/7] dmaengine: sprd: Get transfer residue depending on the transfer direction
2018-09-29 5:49 UTC
[1/7] dmaengine: sprd: Remove direction usage from struct dma_slave_config
2018-09-29 5:48 UTC
[v3,7/7] dmaengine: stm32-mdma: enable descriptor_reuse
2018-09-28 13:01 UTC
[v3,6/7] dmaengine: stm32-dma: enable descriptor_reuse
2018-09-28 13:01 UTC
[v3,5/7] dmaengine: stm32-mdma: Add DMA/MDMA chaining support
2018-09-28 13:01 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-09-28 13:01 UTC
[v3,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-09-28 13:01 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-09-28 13:01 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-09-28 13:01 UTC
[v2,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-09-28 12:36 UTC
[v2,7/7] dmaengine: stm32-mdma: enable descriptor_reuse
2018-09-28 8:36 UTC
[v2,6/7] dmaengine: stm32-dma: enable descriptor_reuse
2018-09-28 8:36 UTC
[v2,5/7] dmaengine: stm32-mdma: Add DMA/MDMA chaining support
2018-09-28 8:36 UTC
[v2,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-09-28 8:36 UTC
[v2,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-09-28 8:36 UTC
[v2,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-09-28 8:36 UTC
[v2,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-09-28 8:36 UTC
[v5,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-09-28 7:11 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-09-28 6:53 UTC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
2018-09-27 15:41 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
2018-09-27 12:46 UTC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
2018-09-27 4:02 UTC
[v1,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-09-26 20:23 UTC
[v1,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-09-26 20:22 UTC
[v1,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-09-26 20:21 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-09-24 13:00 UTC
[RFC,4/5] dmaengine: ti: New driver for K3 UDMA
2018-09-24 13:00 UTC
[RFC,3/5] dt-bindings: dma: ti: Add document for K3 UDMA
2018-09-24 13:00 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-09-24 13:00 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-09-24 13:00 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-24 12:01 UTC
[08/12] dmaengine: idma: remove dma_slave_config direction usage
2018-09-21 17:04 UTC
[07/12] dmaengine: hsu: remove dma_slave_config direction usage
2018-09-21 17:03 UTC
[05/12] dmaengine: dw: remove dma_slave_config direction usage
2018-09-21 17:03 UTC
[4/4] arm: dts: mt2701: add uart APDMA to device tree
2018-09-20 6:41 UTC
[3/4] serial: 8250-mtk: add uart DMA support
2018-09-20 6:41 UTC
[2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-09-20 6:41 UTC
[1/4] dt-bindings: dma: uart: add uart dma bindings
2018-09-20 6:41 UTC
[V3,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-09-19 19:52 UTC
[V3,4/5] dmaengine: dmatest: Add transfer_size parameter
2018-09-19 19:52 UTC
[V3,3/5] dmaengine: dmatest: Add alignment parameter
2018-09-19 19:52 UTC
[V3,2/5] dmaengine: dmatest: Use fixed point div to calculate iops
2018-09-19 19:52 UTC
[V3,1/5] dmaengine: dmatest: Add support for multi channel testing
2018-09-19 19:52 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-19 9:38 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-19 9:20 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:56 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:34 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 23:32 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 22:52 UTC
[03/12] dmaengine: coh901318: remove dma_slave_config direction usage
2018-09-18 22:32 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-18 19:20 UTC
[-next,v3] dmaengine: mcf-edma: avoid warning for wrong pointer cast
2018-09-18 19:16 UTC
[2/3] dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
2018-09-18 16:35 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-09-18 16:25 UTC
[v5,2/7] dmaengine: xilinx_dma: in axidma slave_sg and dma_cyclic mode align split descriptors
2018-09-18 16:21 UTC
dt-bindings: rcar-dmac: Document r8a7744 support
2018-09-17 15:18 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-17 11:03 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-17 7:51 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-14 19:35 UTC
[-next,v3] dmaengine: mcf-edma: avoid warning for wrong pointer cast
2018-09-14 19:13 UTC
driver/dma/ioat: Call del_timer_sync() without holding prep_lock
2018-09-14 18:53 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 18:51 UTC
[v2,4/4] dmaengine: imx-sdma: use GFP_NOWAIT for dma allocations
2018-09-14 17:06 UTC
[v2,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-14 17:06 UTC
[v2,2/4] Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
2018-09-14 17:06 UTC
[v2,1/4] Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"
2018-09-14 17:06 UTC
dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 15:43 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 13:35 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 12:13 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-14 12:13 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 11:48 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 11:35 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-14 9:42 UTC
[1/2] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers
2018-09-14 8:40 UTC
[-next,v2] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 7:11 UTC
[-next] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-14 6:29 UTC
[-next] dmaengine: mcf-edma: fix x86_64 allmodconfig compilation warning
2018-09-13 18:47 UTC
[RFC] dmaengine: rcar-dmac: set scatter/gather max segment size
2018-09-13 14:52 UTC
[01/12] dmaengine: at_hdmac: remove dma_slave_config direction usage
2018-09-13 8:23 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-13 0:51 UTC
[v3,1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC
2018-09-13 0:51 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-12 18:36 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-12 17:00 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 12:09 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 12:05 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-12 9:47 UTC
dma: sh: convert to SPDX identifiers
2018-09-12 9:42 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-12 9:22 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 7:31 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 7:26 UTC
[v3,2/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-12 6:45 UTC
[v3,1/2] dmaengine: doc: Add sections for per descriptor metadata support
2018-09-12 6:45 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 5:25 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 4:35 UTC
[v2,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-09-12 3:01 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:48 UTC
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
2018-09-11 23:44 UTC
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
2018-09-11 23:40 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:37 UTC
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
2018-09-11 23:20 UTC
dmaengine: xilinx_dma: Fix __aligned attribute on zynqmp_dma_desc_ll
2018-09-11 23:05 UTC
[02/12] dmaengine: bcm2835: remove dma_slave_config direction usage
2018-09-11 21:11 UTC
dmaengine: zx-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 15:17 UTC
dmaengine: idma64: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:37 UTC
dmaengine: zx-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:31 UTC
dmaengine: k3dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:25 UTC
dmaengine: moxart-dma: replace spin_lock_irqsave with spin_lock in ISR
2018-09-11 14:17 UTC
[v2,1/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-11 12:33 UTC
[1/3] arm64: dts: actions: s900: Enable Tx DMA for UART5
2018-09-11 12:03 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-11 9:31 UTC
[12/12] dmaengine: mmp_tdma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[11/12] dmaengine: ep93xx_dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[10/12] dmaengine: k3dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[09/12] dmaengine: imx-dma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[08/12] dmaengine: idma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[07/12] dmaengine: hsu: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[06/12] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[05/12] dmaengine: dw: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[04/12] dmaengine: jz4740: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[03/12] dmaengine: coh901318: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[02/12] dmaengine: bcm2835: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
[01/12] dmaengine: at_hdmac: remove dma_slave_config direction usage
2018-09-11 8:35 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 8:30 UTC
[3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-09-11 8:18 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 8:17 UTC
dma: sh: convert to SPDX identifiers
2018-09-11 7:48 UTC
dma: idma64: replace spin_lock_irqsave with spin_lock
2018-09-11 7:44 UTC
[3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-09-11 7:41 UTC
[v2,2/2] dmaengine: doc: Add sections for per descriptor metadata support
2018-09-11 7:36 UTC
[v2,1/2] dmaengine: Add metadata_ops for dma_async_tx_descriptor
2018-09-11 7:33 UTC
[v1,1/1] dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
2018-09-11 7:31 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).