messages from 2018-10-07 14:57:22 to 2018-11-10 16:28:31 UTC [more...]
[v2,2/2] dmaengine: dw-dmac: implement dma protection control setting
2018-11-10 16:28 UTC
[v2,1/2] dt-bindings: dmaengine: dw-dmac: add protection control property
2018-11-10 16:28 UTC
[06/17] dma: bcm2835: Switch to SPDX identifier
2018-11-10 15:34 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-11-08 14:13 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-11-08 14:12 UTC
dmaengine: rcar-dmac: Document R8A774A1 bindings
2018-11-08 13:59 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-11-08 13:26 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-11-08 13:21 UTC
[4/6] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1
2018-11-08 12:48 UTC
dmaengine: rcar-dmac: Document R8A774A1 bindings
2018-11-08 12:23 UTC
dmaengine: rcar-dmac: Document R8A774A1 bindings
2018-11-08 11:03 UTC
[resend] dma: sh: convert to SPDX identifiers
2018-11-08 6:32 UTC
[3/6] dma: tegra: fix incorrect case of DMA
2018-11-07 12:04 UTC
[5/6] dma: tegra: add tracepoints to driver
2018-11-07 10:02 UTC
[3/6] dma: tegra: fix incorrect case of DMA
2018-11-07 8:27 UTC
[v1,1/2] dt-bindings: dmaengine: dw-dmac: add protection control property
2018-11-06 18:36 UTC
[1/3] clk: bcm2835: make license text and module license match
2018-11-06 17:35 UTC
dmaengine: sa11x0: unexport sa11x0_dma_filter_fn and clean up
2018-11-06 13:45 UTC
[3/6] dma: tegra: fix incorrect case of DMA
2018-11-06 13:14 UTC
[2/6] dma: tegra: make byte counters unsigned int
2018-11-06 13:11 UTC
[1/6] dma: tegra: avoid overflow of byte tracking
2018-11-06 13:11 UTC
[1/2] firmware: add nowarn variant of request_firmware_nowait()
2018-11-06 8:20 UTC
[RESEND,7/7] dmaengine: sprd: Add me as one of the module authors
2018-11-06 5:01 UTC
[RESEND,6/7] dmaengine: sprd: Support DMA 2-stage transfer mode
2018-11-06 5:01 UTC
[RESEND,5/7] dmaengine: sprd: Support DMA link-list cyclic callback
2018-11-06 5:01 UTC
[RESEND,4/7] dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
2018-11-06 5:01 UTC
[RESEND,3/7] dmaengine: sprd: Fix the last link-list configuration
2018-11-06 5:01 UTC
[RESEND,2/7] dmaengine: sprd: Get transfer residue depending on the transfer direction
2018-11-06 5:01 UTC
[RESEND,1/7] dmaengine: sprd: Remove direction usage from struct dma_slave_config
2018-11-06 5:01 UTC
[v3,4/4] dmaengine: imx-sdma: use GFP_NOWAIT for dma descriptor allocations
2018-11-06 3:40 UTC
[v3,3/4] dmaengine: imx-sdma: implement channel termination via worker
2018-11-06 3:40 UTC
[v3,2/4] Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
2018-11-06 3:40 UTC
[v3,1/4] Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"
2018-11-06 3:40 UTC
dma: coh901318: Fix a double-lock bug
2018-11-06 3:33 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-11-05 23:29 UTC
[v1,1/2] dt-bindings: dmaengine: dw-dmac: add protection control property
2018-11-05 23:06 UTC
[1/2] firmware: add nowarn variant of request_firmware_nowait()
2018-11-05 18:35 UTC
[2/2] dmaengine: imx-sdma: don't print warning when firmware is absent
2018-11-05 17:02 UTC
[1/2] firmware: add nowarn variant of request_firmware_nowait()
2018-11-05 17:02 UTC
[v1,2/2] dmaengine: dw: implement per-channel protection control setting
2018-11-05 16:23 UTC
[v1,2/2] dmaengine: dw: implement per-channel protection control setting
2018-11-05 16:06 UTC
[v1,2/2] dmaengine: dw: implement per-channel protection control setting
2018-11-05 14:27 UTC
[v1,1/2] dt-bindings: dmaengine: dw-dmac: add protection control property
2018-11-05 14:23 UTC
[v1,2/2] dmaengine: dw: implement per-channel protection control setting
2018-11-05 14:22 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-05 14:05 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-05 11:38 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-05 11:34 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-05 11:32 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-05 9:03 UTC
[v1,2/2] dmaengine: dw: implement per-channel protection control setting
2018-11-04 17:01 UTC
[v1,1/2] dt-bindings: dmaengine: dw-dmac: add protection control property
2018-11-04 17:01 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-11-03 12:24 UTC
dmaengine: dmatest: move size checks earlier in function
2018-11-01 16:07 UTC
dmaengine: fix some typo
2018-11-01 15:35 UTC
[5/6] dma: tegra: add tracepoints to driver
2018-11-01 13:54 UTC
[6/6] dma: tegra: add tracepoint for residual update
2018-10-31 16:03 UTC
[5/6] dma: tegra: add tracepoints to driver
2018-10-31 16:03 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-10-31 16:03 UTC
[3/6] dma: tegra: fix incorrect case of DMA
2018-10-31 16:03 UTC
[2/6] dma: tegra: make byte counters unsigned int
2018-10-31 16:03 UTC
[1/6] dma: tegra: avoid overflow of byte tracking
2018-10-31 16:03 UTC
[6/6] dma: tegra: add tracepoint for residual update
2018-10-31 14:08 UTC
[v11,7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-30 2:36 UTC
[v11,6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-10-30 2:36 UTC
[v11,5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-10-30 2:36 UTC
[v11,4/7] arm: dts: ls1021a: add qdma device tree nodes
2018-10-30 2:36 UTC
[v11,3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-30 2:36 UTC
[v11,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-10-30 2:35 UTC
[v11,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-10-30 2:35 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-10-29 16:17 UTC
[3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-29 14:45 UTC
[V2] dmaengine: dmatest: unmap data on a single code-path when xfer done
2018-10-29 10:08 UTC
[3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-29 9:51 UTC
dmaengine: dmatest: unmap data on a single code-path when xfer done
2018-10-29 9:28 UTC
dmaengine: dmatest: use dmaengine_terminate_sync() instead
2018-10-29 9:23 UTC
[3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-26 20:47 UTC
[7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-26 9:52 UTC
[6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-10-26 9:52 UTC
[5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-10-26 9:52 UTC
[4/7] arm: dts: ls1021a: add qdma device tree nodes
2018-10-26 9:52 UTC
[3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-26 9:52 UTC
[2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-10-26 9:52 UTC
[1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-10-26 9:52 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-10-26 9:46 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-26 7:07 UTC
dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll
2018-10-25 18:18 UTC
dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll
2018-10-25 18:14 UTC
dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll
2018-10-25 18:11 UTC
dmaengine: xilinx_dma: Remove __aligned attribute on zynqmp_dma_desc_ll
2018-10-25 18:05 UTC
dmaengine: imx-sdma: Use a single line for dma_alloc_coherent()
2018-10-25 17:52 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-10-25 16:22 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-10-25 15:57 UTC
[1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470
2018-10-25 14:53 UTC
[1/3] clk: bcm2835: make license text and module license match
2018-10-23 18:31 UTC
[3/3] spi: bcm2835: make license text and module license match
2018-10-23 11:06 UTC
[2/3] dma: bcm2835: make license text and module license match
2018-10-23 11:06 UTC
[1/3] clk: bcm2835: make license text and module license match
2018-10-23 11:06 UTC
[v9,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-10-22 17:14 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-20 16:26 UTC
[v2,4/4] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
2018-10-19 10:38 UTC
[v2,3/4] dmaengine: xilinx_dma: Introduce helper macro for preparing dma address
2018-10-19 10:37 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-19 9:21 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-19 7:11 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-18 23:32 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-18 9:55 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-10-18 7:49 UTC
[1/2] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
2018-10-18 7:49 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-10-18 1:31 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-10-17 9:36 UTC
[1/2] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
2018-10-17 9:36 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-17 8:56 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-17 6:05 UTC
[v9,7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-17 5:59 UTC
[v9,6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-10-17 5:59 UTC
[v9,5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-10-17 5:59 UTC
[v9,4/7] arm: dts: ls1021a: add qdma device tree nodes
2018-10-17 5:59 UTC
[v9,3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-17 5:59 UTC
[v9,2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-10-17 5:59 UTC
[v9,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-10-17 5:59 UTC
[[PATCH] 8/9] DMA-UART-Driver-for-AST2500
2018-10-17 4:11 UTC
[[PATCH] 4/9] Documentation-DTbindings-DMA-controller-of-AST2500
2018-10-17 4:11 UTC
[[PATCH] 2/9] Defconfig-changes-for-DMA-UART-of-AST2500
2018-10-17 4:10 UTC
[[PATCH] 1/9] DT-changes-for-DMA-UART-of-AST2500
2018-10-17 4:10 UTC
[for-stable] dmaengine: stm32-dma: fix incomplete configuration in cyclic mode
2018-10-17 0:00 UTC
dmaengine: ppc4xx: fix off-by-one build failure
2018-10-16 20:28 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-16 14:44 UTC
dmaengine: ppc4xx: fix off-by-one build failure
2018-10-16 14:40 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-16 9:19 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-15 17:14 UTC
dmaengine: owl: Fix warnings generated during build
2018-10-15 17:10 UTC
[1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-10-15 17:07 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-15 17:03 UTC
dmaengine: ppc4xx: fix off-by-one build failure
2018-10-14 21:28 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-10-12 21:47 UTC
[6/6] dma: tegra: add tracepoint for residual update
2018-10-12 17:04 UTC
[5/6] dma: tegra: add tracepoints to driver
2018-10-12 17:01 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-10-12 14:46 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-12 14:42 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-10-12 12:07 UTC
[7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-12 11:31 UTC
[6/6] dma: tegra: add tracepoint for residual update
2018-10-12 9:44 UTC
[5/6] dma: tegra: add tracepoints to driver
2018-10-12 9:44 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2018-10-12 9:44 UTC
[3/6] dma: tegra: fix incorrect case of DMA
2018-10-12 9:44 UTC
[2/6] dma: tegra: make byte counters unsigned int
2018-10-12 9:44 UTC
[1/6] dma: tegra: avoid overflow of byte tracking
2018-10-12 9:44 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-12 9:18 UTC
[7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-12 2:25 UTC
[7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-11 22:08 UTC
[v4,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-11 16:41 UTC
[v4,1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC
2018-10-11 16:41 UTC
[v3,2/2] dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driver
2018-10-11 16:27 UTC
[7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA controller bindings
2018-10-11 9:46 UTC
[6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-10-11 9:46 UTC
[5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-10-11 9:46 UTC
[4/7] arm: dts: ls1021a: add qdma device tree nodes
2018-10-11 9:46 UTC
[3/7] dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs
2018-10-11 9:46 UTC
[2/7] dmaengine: fsldma: Adding macro FSL_DMA_IN/OUT implement for ARM platform
2018-10-11 9:46 UTC
[1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-10-11 9:46 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 19:01 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 11:25 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 10:09 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 9:44 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-10 7:02 UTC
[RFC,4/5] dmaengine: ti: New driver for K3 UDMA
2018-10-10 6:53 UTC
[RFC,5/5] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
2018-10-10 4:05 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-10 4:03 UTC
[RFC,4/5] dmaengine: ti: New driver for K3 UDMA
2018-10-10 4:00 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 13:46 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 11:41 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-10-09 11:22 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 11:05 UTC
[RFC,2/5] dmaengine: Add function to request slave channel from a dma_device
2018-10-09 10:49 UTC
[RFC,1/5] dmaengine: Add support for reporting DMA cached data amount
2018-10-09 10:47 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:59 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 8:57 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-09 8:40 UTC
[v3,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-10-09 8:17 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:02 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 8:00 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:48 UTC
[v3] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:31 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:30 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-10-09 7:22 UTC
[v2] dmaengine: fsl-edma: remove dma_slave_config direction usage
2018-10-09 7:22 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-09 7:18 UTC
[7/7] dmaengine: stm32-dma: properly mask irq bits
2018-10-09 5:47 UTC
[6/7] dmaengine: stm32-dma: fix max items per transfer
2018-10-09 5:47 UTC
[5/7] dmaengine: stm32-dma: fix DMA IRQ status handling
2018-10-09 5:47 UTC
[4/7] dmaengine: stm32-dma: Improve memory burst management
2018-10-09 5:47 UTC
[3/7] dmaengine: stm32-dma: fix typo and reported checkpatch warnings
2018-10-09 5:47 UTC
[2/7] dmaengine: stm32-dma: fix incomplete configuration in cyclic mode
2018-10-09 5:47 UTC
[1/7] dmaengine: stm32-dma: threshold manages with bitfield feature
2018-10-09 5:47 UTC
dmaengine: owl: Fix warnings generated during build
2018-10-08 18:26 UTC
dmaengine: owl: Fix warnings generated during build
2018-10-08 17:16 UTC
[v5,4/7] dmaengine: xilinx_dma: program hardware supported buffer length
2018-10-08 6:46 UTC
[v3,4/7] dmaengine: stm32-dma: Add DMA/MDMA chaining support
2018-10-07 16:00 UTC
[v3,3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings
2018-10-07 14:59 UTC
[v3,2/7] dt-bindings: stm32-dmamux: Add one cell to support DMA/MDMA chain
2018-10-07 14:58 UTC
[v3,1/7] dt-bindings: stm32-dma: Add DMA/MDMA chaining support bindings
2018-10-07 14:57 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).