messages from 2018-11-26 08:09:38 to 2018-12-23 08:57:13 UTC [more...]
[18/20] dmaengine: sa11x0: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[17/20] dmaengine: pl330: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[14/20] dmaengine: st_fdma: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[12/20] dmaengine: dw: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[07/20] dmaengine: at_hdmac: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[2/5] dmaengine: bcm2835: Fix abort of transactions
2018-12-22 7:28 UTC
[4/5] dmaengine: bcm2835: Enforce control block alignment
2018-12-22 7:28 UTC
[1/5] dmaengine: bcm2835: Fix interrupt race on RT
2018-12-22 7:28 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2018-12-22 7:28 UTC
[3/5] dmaengine: bcm2835: Clean up abort of transactions
2018-12-22 7:28 UTC
dmaengine: fsldma: Add 64-bit I/O accessors for powerpc64
2018-12-22 4:34 UTC
[RFC,07/10] dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec
2018-12-19 14:04 UTC
[RFC,03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA
2018-12-19 14:03 UTC
[v6,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-19 3:12 UTC
[v6,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-19 2:20 UTC
[v6,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-19 2:20 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-18 15:55 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-18 10:58 UTC
[V3,2/2] Tools: Replace open encodings for NUMA_NO_NODE
2018-12-18 10:12 UTC
[V3,1/2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-18 10:12 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-18 10:11 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-18 3:54 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-17 23:47 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-17 19:16 UTC
[RFC,v2,6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
2018-12-17 17:19 UTC
[RFC,v2,5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
2018-12-17 17:19 UTC
[RFC,v2,4/6] PCI: Add Synopsys endpoint EDDA Device id
2018-12-17 17:19 UTC
[RFC,v2,3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
2018-12-17 17:19 UTC
[RFC,v2,2/6] dmaengine: Add Synopsys eDMA IP version 0 support
2018-12-17 17:19 UTC
[RFC,v2,1/6] dmaengine: Add Synopsys eDMA IP core driver
2018-12-17 17:19 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 15:56 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 11:57 UTC
[5/6] xhci: Use device_iommu_mapped()
2018-12-17 11:21 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 10:07 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-17 9:31 UTC
[3/6] ACPI/IORT: Use device_iommu_mapped()
2018-12-17 9:21 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 8:39 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 7:23 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 6:51 UTC
[1/4] dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-17 6:19 UTC
dmaengine: fsl-qdma: add MODULE_LICENSE
2018-12-17 6:16 UTC
[6/6] dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
2018-12-17 6:11 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-17 6:11 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-17 5:31 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-17 5:29 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-15 13:50 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-14 20:09 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-14 16:40 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-14 10:20 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-14 10:03 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2018-12-14 1:03 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-13 20:21 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-13 20:17 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-13 14:40 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-13 11:51 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-13 11:49 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-13 11:36 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-13 11:03 UTC
[v5,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-13 6:18 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-12 23:03 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-12 23:00 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-12 13:39 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-12 13:25 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-12 11:13 UTC
[RFC,5/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
2018-12-12 11:13 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-12 11:13 UTC
[RFC,3/6] dma: Add Synopsys eDMA IP version 0 debugfs support
2018-12-12 11:13 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-12 11:13 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-12 11:13 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:07 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:04 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-11 23:12 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 15:18 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 14:59 UTC
[6/6] dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[5/6] xhci: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[4/6] powerpc/iommu: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[3/6] ACPI/IORT: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[2/6] iommu/of: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 13:43 UTC
[v5,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-11 5:37 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-11 5:37 UTC
dmaengine: fsl-qdma: add MODULE_LICENSE
2018-12-10 20:55 UTC
[v4,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-10 10:07 UTC
[V4,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-12-10 8:52 UTC
[V4,4/5] dmaengine: dmatest: Add transfer_size parameter
2018-12-10 8:52 UTC
[V4,3/5] dmaengine: dmatest: Add alignment parameter
2018-12-10 8:52 UTC
[V4,2/5] dmaengine: dmatest: Use fixed point div to calculate iops
2018-12-10 8:52 UTC
[V4,1/5] dmaengine: dmatest: Add support for multi channel testing
2018-12-10 8:52 UTC
[resend,v4,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-10 3:47 UTC
[resend,v4,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-10 3:47 UTC
[v4,2/2] arm: dts: mt2701: add uart APDMA to device tree
2018-12-10 2:57 UTC
[v4,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-10 2:57 UTC
[v3,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-09 5:07 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2018-12-08 20:28 UTC
[v2,1/7] dmaengine: dw: Add missed multi-block support for iDMA 32-bit
2018-12-07 13:32 UTC
[v3,2/2] arm: dts: mt2701: add uart APDMA to device tree
2018-12-07 7:47 UTC
[v3,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-07 7:47 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2018-12-07 4:29 UTC
[1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*
2018-12-07 4:28 UTC
[v2,2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-12-06 21:22 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-06 14:56 UTC
[v11,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-12-06 11:24 UTC
[v11,6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-12-06 11:04 UTC
[v2,2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-12-06 9:55 UTC
[v1] dmaengine: imx-sdma: refine to load context only once
2018-12-06 6:36 UTC
[v2] dmaengine: dw: Fix FIFO size for Intel Merrifield
2018-12-06 5:24 UTC
[v2] dmaengine: dw: Fix FIFO size for Intel Merrifield
2018-12-06 4:21 UTC
[v11,6/7] arm64: dts: ls1046a: add qdma device tree nodes
2018-12-06 1:05 UTC
[v11,5/7] arm64: dts: ls1043a: add qdma device tree nodes
2018-12-06 1:04 UTC
[v11,4/7] arm: dts: ls1021a: add qdma device tree nodes
2018-12-06 1:02 UTC
[v2,2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-12-05 21:07 UTC
[v2,2/7] dmaengine: dw: Remove misleading is_private property
2018-12-05 18:18 UTC
[v2,1/7] dmaengine: dw: Add missed multi-block support for iDMA 32-bit
2018-12-05 18:12 UTC
[v11,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT
2018-12-05 17:49 UTC
[V3,1/5] dmaengine: dmatest: Add support for multi channel testing
2018-12-05 17:23 UTC
[v2,2/7] dmaengine: dw: Remove misleading is_private property
2018-12-05 16:38 UTC
[v2] dmaengine: dw: Fix FIFO size for Intel Merrifield
2018-12-05 16:33 UTC
[v2,7/7] dmaengine: dw: convert to SPDX identifiers
2018-12-05 16:28 UTC
[v2,6/7] dmaengine: dw: Don't pollute CTL_LO on iDMA 32-bit
2018-12-05 16:28 UTC
[v2,5/7] dmaengine: dw: Reset DRAIN bit when resume the channel
2018-12-05 16:28 UTC
[v2,4/7] dmaengine: dw: Split DW and iDMA 32-bit operations
2018-12-05 16:28 UTC
[v2,3/7] dmaengine: dw: Remove unused internal property
2018-12-05 16:28 UTC
[v2,2/7] dmaengine: dw: Remove misleading is_private property
2018-12-05 16:28 UTC
[v2,1/7] dmaengine: dw: Add missed multi-block support for iDMA 32-bit
2018-12-05 16:28 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-12-05 16:21 UTC
[4/4] dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:19 UTC
[3/4] dmaengine: pxa: remove DBGFS_FUNC_DECL()
2018-12-05 16:18 UTC
[2/4] dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:18 UTC
[1/4] dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-05 16:18 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-12-05 15:59 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-12-05 15:49 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-05 11:47 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-05 11:31 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-05 11:20 UTC
dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
2018-12-05 9:08 UTC
[v2,4/4] arm: dts: mt2701: add uart APDMA to device tree
2018-12-05 8:43 UTC
[v2,3/4] serial: 8250-mtk: add uart DMA support
2018-12-05 8:42 UTC
[v2,2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support
2018-12-05 8:42 UTC
[v2,1/4] dt-bindings: dma: uart: add uart dma bindings
2018-12-05 8:42 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-12-05 8:32 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-12-05 8:27 UTC
dmaengine: dmatest: fix a small memory leak in dmatest_func()
2018-12-05 8:08 UTC
[v3] dmaengine: sh: Remove R-Mobile APE6 support
2018-12-05 7:32 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-05 5:00 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-04 21:26 UTC
[v1,1/5] dmaengine: dw: Fix FIFO size for Intel Merrifield
2018-12-04 17:03 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-03 18:59 UTC
dmaengine: dmatest: fix a small memory leak in dmatest_func()
2018-12-03 14:49 UTC
[v3] dmaengine: sh: Remove R-Mobile APE6 support
2018-12-03 14:18 UTC
[v2] dmaengine: sh: Remove R-Mobile APE6 support
2018-12-03 14:17 UTC
[RFC,04/10] dma-engine: sun4i: Add support for Allwinner suniv F1C100s
2018-12-03 11:00 UTC
[RFC,04/10] dma-engine: sun4i: Add support for Allwinner suniv F1C100s
2018-12-03 10:56 UTC
[RFC,01/10] dma-engine: sun4i: Add a quirk to support different chips
2018-12-03 10:54 UTC
[RFC,10/10] ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
2018-12-02 21:23 UTC
[RFC,09/10] ARM: dts: suniv: f1c100s: Add support for Audio Codec
2018-12-02 21:23 UTC
[RFC,08/10] ASoC: sun4i-codec: Add support for Allwinner suniv F1C100s
2018-12-02 21:23 UTC
[RFC,07/10] dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec
2018-12-02 21:23 UTC
[RFC,06/10] ASoC: sun4i-codec: Add DMA Max Burst field
2018-12-02 21:23 UTC
[RFC,05/10] ARM: dts: suniv: f1c100s: Add support for DMA
2018-12-02 21:23 UTC
[RFC,04/10] dma-engine: sun4i: Add support for Allwinner suniv F1C100s
2018-12-02 21:23 UTC
[RFC,03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA
2018-12-02 21:23 UTC
[RFC,02/10] dma-engine: sun4i: Add has_reset option to quirk
2018-12-02 21:23 UTC
[RFC,01/10] dma-engine: sun4i: Add a quirk to support different chips
2018-12-02 21:23 UTC
[v1,3/5] dmaengine: dw: Split DW and iDMA 32-bit operations
2018-12-01 3:30 UTC
[v1,3/5] dmaengine: dw: Split DW and iDMA 32-bit operations
2018-11-30 20:54 UTC
[v1,5/5] dmaengine: dw: convert to SPDX identifiers
2018-11-30 20:36 UTC
[v1,4/5] dmaengine: dw: Reset DRAIN bit when resume the channel
2018-11-30 20:36 UTC
[v1,3/5] dmaengine: dw: Split DW and iDMA 32-bit operations
2018-11-30 20:36 UTC
[v1,2/5] dmaengine: dw: Add missed multi-block support for iDMA 32-bit
2018-11-30 20:36 UTC
[v1,1/5] dmaengine: dw: Fix FIFO size for Intel Merrifield
2018-11-30 20:36 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-11-30 19:18 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-11-30 15:59 UTC
dmaengine: remove DBGFS_FUNC_DECL()
2018-11-30 15:42 UTC
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
2018-11-30 10:07 UTC
[v2] dmaengine: sh: Remove R-Mobile APE6 support
2018-11-29 14:25 UTC
dmaengine: at_hdmac: fix module unloading
2018-11-29 14:21 UTC
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
2018-11-29 14:20 UTC
dmaengine: at_hdmac: fix module unloading
2018-11-29 13:52 UTC
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
2018-11-29 13:51 UTC
[v2] dmaengine: sh: Remove R-Mobile APE6 support
2018-11-29 11:18 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:16 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-28 11:15 UTC
dmaengine: at_hdmac: fix module unloading
2018-11-27 16:06 UTC
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
2018-11-27 16:06 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-27 13:58 UTC
DMA: atmel_serial: Opening and closing the serial device repeatedly causes kmalloc-32 slab leak
2018-11-27 10:46 UTC
DMA: atmel_serial: Opening and closing the serial device repeatedly causes kmalloc-32 slab leak
2018-11-27 9:55 UTC
DMA: atmel_serial: Opening and closing the serial device repeatedly causes kmalloc-32 slab leak
2018-11-27 9:51 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-27 7:57 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-26 18:04 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-26 17:56 UTC
[v6,3/7] dt-bindings: dmaengine: xilinx_dma: add optional xlnx,sg-length-width property
2018-11-26 16:12 UTC
dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
2018-11-26 15:14 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-26 14:02 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-26 13:47 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-26 12:48 UTC
[V2] mm: Replace all open encodings for NUMA_NO_NODE
2018-11-26 12:26 UTC
dmaengine: dmatest: wrap src & dst data into a struct
2018-11-26 8:43 UTC
linux-next: build warning after merge of the slave-dma tree
2018-11-26 8:09 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).