messages from 2018-12-10 08:52:37 to 2019-01-07 12:40:17 UTC [more...]
dmaengine: qcom: bam_dma: use struct_size() in kzalloc()
2019-01-07 12:40 UTC
dmaengine: dma-jz4780: Use struct_size() in devm_kzalloc()
2019-01-07 12:39 UTC
[v3,7/7] dmaengine: dw: convert to SPDX identifiers
2019-01-07 11:07 UTC
[v3,6/7] dmaengine: dw: Don't pollute CTL_LO on iDMA 32-bit
2019-01-07 11:07 UTC
[v3,5/7] dmaengine: dw: Reset DRAIN bit when resume the channel
2019-01-07 11:07 UTC
[v3,4/7] dmaengine: dw: Split DW and iDMA 32-bit operations
2019-01-07 11:07 UTC
[v3,3/7] dmaengine: dw: Remove unused internal property
2019-01-07 11:07 UTC
[v3,2/7] dmaengine: dw: Remove misleading is_private property
2019-01-07 11:07 UTC
[v3,1/7] dmaengine: dw: Add missed multi-block support for iDMA 32-bit
2019-01-07 11:07 UTC
dmaengine: st_fdma: use struct_size() in kzalloc()
2019-01-07 8:50 UTC
[1/5] dmaengine: bcm2835: Fix interrupt race on RT
2019-01-07 8:32 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2019-01-07 8:28 UTC
[3/5] dmaengine: bcm2835: Clean up abort of transactions
2019-01-07 8:26 UTC
[1/5] dmaengine: bcm2835: Fix interrupt race on RT
2019-01-07 7:00 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-07 6:24 UTC
[v2,2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2019-01-07 1:34 UTC
[v2,1/2] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*
2019-01-07 1:32 UTC
dmaengine: fsl-edma: use struct_size() in kzalloc()
2019-01-06 20:33 UTC
dmaengine: fsl-edma: use struct_size() in kzalloc()
2019-01-06 19:40 UTC
[2/5] dmaengine: bcm2835: Fix abort of transactions
2019-01-06 8:38 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 14:08 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 13:46 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-05 5:48 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-05 5:44 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-05 5:39 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-05 5:22 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 4:58 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 4:53 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 4:39 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-05 4:00 UTC
[4/8,v2] dma: k3dma: Delete axi_config
2019-01-05 3:44 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-05 3:41 UTC
dmaengine: fsl-edma: use struct_size() in kzalloc()
2019-01-04 21:25 UTC
dmaengine: tegra-apb: Use struct_size() in devm_kzalloc()
2019-01-04 21:16 UTC
[5/8,v2] dma: k3dma: Add support to dma_avail_chan
2019-01-04 20:56 UTC
[4/8,v2] dma: k3dma: Delete axi_config
2019-01-04 20:56 UTC
[3/8,v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
2019-01-04 20:56 UTC
[2/8,v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan
2019-01-04 20:56 UTC
[1/8,v2] Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
2019-01-04 20:56 UTC
dmaengine: st_fdma: use struct_size() in kzalloc()
2019-01-04 18:43 UTC
dmaengine: bcm2835: Use struct_size() in kzalloc()
2019-01-04 18:30 UTC
dmaengine: qcom: bam_dma: use struct_size() in kzalloc()
2019-01-04 17:32 UTC
[1/3] k3dma: Upgrade k3dma drever to support hisi_asp_dma hardware
2019-01-04 17:32 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2019-01-04 17:31 UTC
[1/3] k3dma: Upgrade k3dma drever to support hisi_asp_dma hardware
2019-01-04 17:24 UTC
[v9,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-01-04 17:19 UTC
[RESEND,v1] dmaengine: stm32-dma: check FIFO error interrupt enable
2019-01-04 15:47 UTC
[RFC,01/10] dma-engine: sun4i: Add a quirk to support different chips
2019-01-04 15:38 UTC
[5/5] dma: tegra: add tracepoints to driver
2019-01-04 15:24 UTC
[v2,7/7] dmaengine: dw: convert to SPDX identifiers
2019-01-04 15:20 UTC
[v1] dmaengine: imx-sdma: refine to load context only once
2019-01-04 15:14 UTC
[5/5] dma: tegra: add tracepoints to driver
2019-01-04 15:10 UTC
[5/5] dma: tegra: add tracepoints to driver
2019-01-04 15:06 UTC
[v6,1/7] dmaengine: xilinx_dma: commonize DMA copy size calculation
2019-01-04 14:59 UTC
dmaengine: fix dmaengine_desc_callback_valid() doesn't check for callback_result
2019-01-04 14:51 UTC
dmaengine: qcom_hidma: Check for driver register failure
2019-01-04 14:38 UTC
dma/mv_xor: Fix a missing check in mv_xor_channel_add
2019-01-04 14:36 UTC
dmaengine: stm32-mdma: Add a check on read_u32_array
2019-01-04 14:33 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2019-01-04 12:38 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2019-01-04 8:56 UTC
dmaengine: stm32-mdma: Add a check on read_u32_array
2019-01-04 8:05 UTC
[3/3] arm64: dts: hi3660: Add hisi asp dma device
2019-01-04 2:44 UTC
[2/3] dmaengine: Extend the k3dma driver binding
2019-01-03 23:21 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2019-01-03 18:00 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2019-01-03 17:35 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2019-01-03 14:53 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2019-01-03 12:55 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2019-01-03 12:45 UTC
[RESEND,v1] dmaengine: stm32-dma: check FIFO error interrupt enable
2019-01-03 10:17 UTC
[RESEND,v1,3/3] dmaengine: stm32-mdma: Add PM Runtime support
2019-01-03 10:17 UTC
[RESEND,v1,2/3] dmaengine: stm32-dmamux: Add PM Runtime support
2019-01-03 10:17 UTC
[RESEND,v1,1/3] dmaengine: stm32-dma: Add PM Runtime support
2019-01-03 10:17 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2019-01-03 9:53 UTC
[v9,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-01-03 2:03 UTC
[v9,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-01-03 1:39 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2019-01-02 20:17 UTC
[2/3] dmaengine: Extend the k3dma driver binding
2019-01-02 18:00 UTC
[07/20] dmaengine: at_hdmac: drop useless LIST_HEAD
2019-01-02 6:04 UTC
[18/20] dmaengine: sa11x0: drop useless LIST_HEAD
2019-01-02 6:04 UTC
[17/20] dmaengine: pl330: drop useless LIST_HEAD
2019-01-02 6:04 UTC
[14/20] dmaengine: st_fdma: drop useless LIST_HEAD
2019-01-02 6:03 UTC
[12/20] dmaengine: dw: drop useless LIST_HEAD
2019-01-02 6:03 UTC
[v9,2/2] arm: dts: mt2712: add uart APDMA to device tree
2019-01-02 2:12 UTC
[v9,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-01-02 2:12 UTC
dmaengine: qcom_hidma: Check for driver register failure
2018-12-30 18:34 UTC
[v8,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-29 10:30 UTC
[v8,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-29 10:30 UTC
dmaengine: qcom_hidma: Check for driver register failure
2018-12-28 20:11 UTC
dmaengine: stm32-mdma: Add a check on read_u32_array
2018-12-28 19:26 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2018-12-28 15:27 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2018-12-28 13:55 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2018-12-28 13:26 UTC
[2/5] dmaengine: bcm2835: Fix abort of transactions
2018-12-28 13:20 UTC
[3/3] arm64: dts: hi3660: Add hisi asp dma device
2018-12-28 6:36 UTC
[2/3] dmaengine: Extend the k3dma driver binding
2018-12-28 6:36 UTC
[1/3] k3dma: Upgrade k3dma drever to support hisi_asp_dma hardware
2018-12-28 6:36 UTC
[2/2] dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
2018-12-27 13:10 UTC
[1/2] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
2018-12-27 13:10 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-26 10:18 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-26 9:28 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-26 6:35 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-26 0:05 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-25 12:06 UTC
dmaengine: fsl-dpaa2-qdma: Add qDMA controller driver for Layerscape SoCs
2018-12-25 11:04 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-25 7:16 UTC
[v7,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-25 1:26 UTC
[v7,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-25 1:26 UTC
dma/mv_xor: Fix a missing check in mv_xor_channel_add
2018-12-24 17:41 UTC
[07/20] dmaengine: at_hdmac: drop useless LIST_HEAD
2018-12-24 9:36 UTC
dmaengine: dma-jz4780: Use struct_size() in devm_kzalloc()
2018-12-24 6:52 UTC
dmaengine: fsldma: Add 64-bit I/O accessors for powerpc64
2018-12-24 5:29 UTC
dmaengine: fsldma: Add 64-bit I/O accessors for powerpc64
2018-12-24 4:45 UTC
dmaengine: fsldma: Add 64-bit I/O accessors for powerpc64
2018-12-24 3:42 UTC
[18/20] dmaengine: sa11x0: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[17/20] dmaengine: pl330: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[14/20] dmaengine: st_fdma: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[12/20] dmaengine: dw: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[07/20] dmaengine: at_hdmac: drop useless LIST_HEAD
2018-12-23 8:57 UTC
[3/5] dmaengine: bcm2835: Clean up abort of transactions
2018-12-22 7:28 UTC
[2/5] dmaengine: bcm2835: Fix abort of transactions
2018-12-22 7:28 UTC
[5/5] dmaengine: bcm2835: Remove dead code
2018-12-22 7:28 UTC
[1/5] dmaengine: bcm2835: Fix interrupt race on RT
2018-12-22 7:28 UTC
[4/5] dmaengine: bcm2835: Enforce control block alignment
2018-12-22 7:28 UTC
dmaengine: fsldma: Add 64-bit I/O accessors for powerpc64
2018-12-22 4:34 UTC
[RFC,07/10] dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec
2018-12-19 14:04 UTC
[RFC,03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA
2018-12-19 14:03 UTC
[v6,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-19 3:12 UTC
[v6,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-19 2:20 UTC
[v6,1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2018-12-19 2:20 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-18 15:55 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-18 10:58 UTC
[V3,2/2] Tools: Replace open encodings for NUMA_NO_NODE
2018-12-18 10:12 UTC
[V3,1/2] mm: Replace all open encodings for NUMA_NO_NODE
2018-12-18 10:12 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-18 10:11 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-18 3:54 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-17 23:47 UTC
dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
2018-12-17 19:16 UTC
[RFC,v2,6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
2018-12-17 17:19 UTC
[RFC,v2,5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
2018-12-17 17:19 UTC
[RFC,v2,4/6] PCI: Add Synopsys endpoint EDDA Device id
2018-12-17 17:19 UTC
[RFC,v2,3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
2018-12-17 17:19 UTC
[RFC,v2,2/6] dmaengine: Add Synopsys eDMA IP version 0 support
2018-12-17 17:19 UTC
[RFC,v2,1/6] dmaengine: Add Synopsys eDMA IP core driver
2018-12-17 17:19 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 15:56 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 11:57 UTC
[5/6] xhci: Use device_iommu_mapped()
2018-12-17 11:21 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 10:07 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-17 9:31 UTC
[3/6] ACPI/IORT: Use device_iommu_mapped()
2018-12-17 9:21 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-17 8:39 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 7:23 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-17 6:51 UTC
[1/4] dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
2018-12-17 6:19 UTC
dmaengine: fsl-qdma: add MODULE_LICENSE
2018-12-17 6:16 UTC
[6/6] dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
2018-12-17 6:11 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-17 6:11 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-17 5:31 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-17 5:29 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-15 13:50 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-14 20:09 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-14 16:40 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-14 10:20 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-14 10:03 UTC
[2/2] dmaengine: qcom_hidma: assign channel cookie correctly
2018-12-14 1:03 UTC
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
2018-12-13 20:21 UTC
dmaengine: rcar-dmac: Document R8A774C0 bindings
2018-12-13 20:17 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-13 14:40 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-13 11:51 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-13 11:49 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-13 11:36 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-13 11:03 UTC
[v5,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-13 6:18 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-12 23:03 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-12 23:00 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-12 13:39 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-12 13:25 UTC
[RFC,6/6] pci: pci_ids: Add Synopsys device id 0xedda
2018-12-12 11:13 UTC
[RFC,5/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
2018-12-12 11:13 UTC
[RFC,4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
2018-12-12 11:13 UTC
[RFC,3/6] dma: Add Synopsys eDMA IP version 0 debugfs support
2018-12-12 11:13 UTC
[RFC,2/6] dma: Add Synopsys eDMA IP version 0 support
2018-12-12 11:13 UTC
[RFC,1/6] dma: Add Synopsys eDMA IP core driver
2018-12-12 11:13 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:07 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-12 11:04 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-11 23:12 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 15:18 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 14:59 UTC
[6/6] dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[5/6] xhci: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[4/6] powerpc/iommu: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[3/6] ACPI/IORT: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[2/6] iommu/of: Use device_iommu_mapped()
2018-12-11 13:43 UTC
[1/6] driver core: Introduce device_iommu_mapped() function
2018-12-11 13:43 UTC
[v5,2/2] arm: dts: mt2712: add uart APDMA to device tree
2018-12-11 5:37 UTC
[v5,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-11 5:37 UTC
dmaengine: fsl-qdma: add MODULE_LICENSE
2018-12-10 20:55 UTC
[v4,1/2] dmaengine: 8250_mtk_dma: add Mediatek uart DMA support
2018-12-10 10:07 UTC
[V4,5/5] dmaengine: Documentation: Add documentation for multi chan testing
2018-12-10 8:52 UTC
[V4,4/5] dmaengine: dmatest: Add transfer_size parameter
2018-12-10 8:52 UTC
[V4,3/5] dmaengine: dmatest: Add alignment parameter
2018-12-10 8:52 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).