[PATCH v2] dmaengine: imx-sdma: fix incorrect conversion to readl_relaxed_poll_timeout_atomic()

[Russell King <rmk+kernel@armlinux.org.uk>]

When imx-sdma was converted to use readl_relaxed_poll_timeout_atomic(),
the termination condition was inverted.  Fix this.

Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/dma/imx-sdma.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 5f3c1378b90e..c45cbdb09714 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -655,15 +655,21 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 static int sdma_run_channel0(struct sdma_engine *sdma)
 {
 	int ret;
-	u32 reg;
+	u32 reg, mask;
+
+	// Disable channel 0 interrupt
+	mask = readl_relaxed(sdma->regs + SDMA_H_INTRMSK);
+	writel_relaxed(mask & ~1, sdma->regs + SDMA_H_INTRMSK);
 
 	sdma_enable_channel(sdma, 0);
 
-	ret = readl_relaxed_poll_timeout_atomic(sdma->regs + SDMA_H_STATSTOP,
-						reg, !(reg & 1), 1, 500);
+	ret = readl_relaxed_poll_timeout_atomic(sdma->regs + SDMA_H_INTR,
+						reg, reg & 1, 1, 500);
 	if (ret)
 		dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
 
+	writel_relaxed(mask, sdma->regs + SDMA_H_INTRMSK);
+
 	/* Set bits of CONFIG register with dynamic context switching */
 	reg = readl(sdma->regs + SDMA_H_CONFIG);
 	if ((reg & SDMA_H_CONFIG_CSM) == 0) {
-- 
2.7.4