Re: [PATCH 7/8] serial: 8250/ingenic: Add support for the JZ4750/JZ4755 SoCs

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Sun, Oct 09, 2022 at 09:13:36PM +0300, Siarhei Volkau wrote:
> These SoCs are close to others but they have a clock divisor /2 for low
> clock peripherals, thus to set up a proper baud rate we need to take
> this into account.
> 
> The divisor bit is located in CGU area, unfortunately the clk framework
> can't be used at early boot steps, so it's checked by direct readl()
> call.
> 
> Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
> ---
>  drivers/tty/serial/8250/8250_ingenic.c | 39 ++++++++++++++++++++++----
>  1 file changed, 34 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
> index 2b2f5d8d2..f2662720d 100644
> --- a/drivers/tty/serial/8250/8250_ingenic.c
> +++ b/drivers/tty/serial/8250/8250_ingenic.c
> @@ -70,7 +70,8 @@ static void ingenic_early_console_write(struct console *console,
>  			   ingenic_early_console_putc);
>  }
>  
> -static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev)
> +static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev,
> +						     int clkdiv)

What does "clkdiv" mean here?

And this function is rough, adding a random integer to a function
requires you to look it up every time you see this call.

If you only have 1 or 2 as an option, just have 2 functions instead
please.

thanks,

greg k-h